螺母粗牙螺纹等紧固件检测

GB/T 3098.2-2000 紧固件机械性能 螺母 粗牙螺纹

本标准规定了在环境温度为10～35℃条件下进行试验时，规定保证载荷值的螺母机械性能。 该环境温度条件下判定为符合本标准的产品，在较高或较低温度下，机械和物理性能可能不同，使用者应予注意。 本标准适用的螺母： 螺纹公称直径D≤39 mm

Mechanical properties of fasteners--Nuts Coarse thread

GB/T 3098.4-2000 紧固件机械性能 螺母 细牙螺纹

本标准规定了在环境温度为10～35℃条件下进行试验时，规定保证载荷值的螺母机械性能。 该环境温度条件下判定为符合本标准的产品，在较高或较低温度下，机械和物理性能可能不同，使用者应予注意。 本标准适用的螺母： 螺纹公称直径D=8-39mm（细牙螺纹

Mechanical properties of fasteners-Nuts-Fine pitch thread

SANS 1700-14-6:2003 紧固件．第14部分：六角螺母．第6节：六角带法兰螺母．粗牙螺纹

Specifies the characteristics of hexagon nuts with flange, with metric coarse threads from M5 to M20 inclusive, of product grade A for threads up

Fasteners Part 14: Hexagon nuts Section 6: Hexagon nuts with flange - Coarse thread

NF E25-400-1*NF EN ISO 898-2:2012 碳钢和合金钢紧固件机械性能.第2部分:规定性能等级的螺母.粗牙螺纹和细牙螺纹

Mechanical properties of fasteners made of carbon steel and alloy steel - Part 2 : nuts with specified property classes - Coarse thread and fine pitch thread.

EN ISO 898-2:2022 碳素钢和合金钢制紧固件机械性能.第2部分:规定性能等级螺母.粗牙螺纹和细牙螺纹

This document specifies the mechanical and physical properties of nuts made of non-alloy steel or alloy steel, when tested at the ambient temperature

Fasteners - Mechanical properties of fasteners made of carbon steel and alloy steel - Part 2: Nuts with specified property classes (ISO 898-2:2022)

EN ISO 898-2:2012 碳素钢和合金钢制紧固件机械性能.第2部分:规定性能等级螺母.粗牙螺纹和细牙螺纹

This part of ISO 898 specifies mechanical and physical properties of nuts with coarse thread and fine pitchthread made of carbon steel and alloy steel

Mechanical properties of fasteners made of carbon steel and alloy steel - Part 2: Nuts with specified property classes - Coarse thread and fine pitch thread (ISO 898-2:2012)

BS EN ISO 898-5:2012 碳钢及合金钢制紧固件的机械性能.带制定硬度等级的固定螺丝和类似螺纹紧固件.粗牙螺纹和细牙螺纹

Mechanical properties of fasteners made of carbon steel and alloy steel. Set screws and similar threaded fasteners with specified hardness classes. Coarse thread and fine pitch thread

DIN 80705:2018-07 小对边薄螺母 粗牙螺纹、细牙螺纹

Thin nuts with small widths across flats - Coarse pitch thread, fine pitch thread

AS/NZS 4291.2:1995 紧固件的机械性能．有规定保证载荷值的螺母．粗牙螺纹

Specifies materials, mechanical properties and marking requirements for steel nuts of property classes 4, 5, 6, 8, 9, 10 and 12 with ISO metric coarse

Mechanical properties of fasteners - Nuts with specified proof load values - Coarse thread

DIN EN ISO 8674:2022-06 紧固件 六角高螺母（2 型） 带细牙螺纹

Fasteners - Hexagon high nuts (style 2), with fine pitch thread (ISO/DIS 8674.2:2022); German and English version prEN ISO 8674:2022 / Note: Date of issue 2022-04-29*Intended as replacement for DIN EN ISO 8674 (2013-04).

ISO/FDIS 8675 紧固件 — 六角薄螺母（0 型），带细牙螺纹

Fasteners — Hexagon thin nuts (style 0), with fine pitch thread

ISO 8675:2023 紧固件 六角薄螺母（0 型） 带细牙螺纹

Fasteners — Hexagon thin nuts (style 0), with fine pitch thread

BS EN ISO 8675:2023 紧固件 六角薄螺母（0 型），带细牙螺纹

Fasteners. Hexagon thin nuts (style 0), with fine pitch thread

DIN EN ISO 898-5:2012-09 碳钢和合金钢紧固件的机械性能第5部分：紧定螺钉和具有规定硬度等级的类似螺纹紧固件粗牙螺纹和细牙螺纹

Mechanical properties of fasteners made of carbon steel and alloy steel - Part 5: Set screws and similar threaded fasteners with specified hardness classes - Coarse thread and fine pitch thread (ISO 898-5:2012); German version EN ISO 898-5:2012

GOST R ISO 898-2-2013 碳钢和合金钢制紧固件机械性能. 第2部分. 带有粗牙螺纹和细牙螺纹的规定性能等级的螺母

Mechanical properties of fasteners made of carbon steel and alloy steel. Part 2. Nuts with specified property classes with coarse thread and fine pitch thread

GB/T 3098.2-2000 紧固件机械性能 螺母 粗牙螺纹

本标准规定了在环境温度为10～35℃条件下进行试验时，规定保证载荷值的螺母机械性能。 该环境温度条件下判定为符合本标准的产品，在较高或较低温度下，机械和物理性能可能不同，使用者应予注意。 本标准适用的螺母： 螺纹公称直径D≤39 mm

Mechanical properties of fasteners--Nuts Coarse thread

GB/T 3098.4-2000 紧固件机械性能 螺母 细牙螺纹

本标准规定了在环境温度为10～35℃条件下进行试验时，规定保证载荷值的螺母机械性能。 该环境温度条件下判定为符合本标准的产品，在较高或较低温度下，机械和物理性能可能不同，使用者应予注意。 本标准适用的螺母： 螺纹公称直径D=8-39mm（细牙螺纹

Mechanical properties of fasteners-Nuts-Fine pitch thread

SANS 1700-14-6:2003 紧固件．第14部分：六角螺母．第6节：六角带法兰螺母．粗牙螺纹

Specifies the characteristics of hexagon nuts with flange, with metric coarse threads from M5 to M20 inclusive, of product grade A for threads up

Fasteners Part 14: Hexagon nuts Section 6: Hexagon nuts with flange - Coarse thread

NF E25-400-1*NF EN ISO 898-2:2012 碳钢和合金钢紧固件机械性能.第2部分:规定性能等级的螺母.粗牙螺纹和细牙螺纹

Mechanical properties of fasteners made of carbon steel and alloy steel - Part 2 : nuts with specified property classes - Coarse thread and fine pitch thread.

EN ISO 898-2:2022 碳素钢和合金钢制紧固件机械性能.第2部分:规定性能等级螺母.粗牙螺纹和细牙螺纹

This document specifies the mechanical and physical properties of nuts made of non-alloy steel or alloy steel, when tested at the ambient temperature

Fasteners - Mechanical properties of fasteners made of carbon steel and alloy steel - Part 2: Nuts with specified property classes (ISO 898-2:2022)

EN ISO 898-2:2012 碳素钢和合金钢制紧固件机械性能.第2部分:规定性能等级螺母.粗牙螺纹和细牙螺纹

This part of ISO 898 specifies mechanical and physical properties of nuts with coarse thread and fine pitchthread made of carbon steel and alloy steel

Mechanical properties of fasteners made of carbon steel and alloy steel - Part 2: Nuts with specified property classes - Coarse thread and fine pitch thread (ISO 898-2:2012)

BS EN ISO 898-5:2012 碳钢及合金钢制紧固件的机械性能.带制定硬度等级的固定螺丝和类似螺纹紧固件.粗牙螺纹和细牙螺纹

Mechanical properties of fasteners made of carbon steel and alloy steel. Set screws and similar threaded fasteners with specified hardness classes. Coarse thread and fine pitch thread

DIN 80705:2018-07 小对边薄螺母 粗牙螺纹、细牙螺纹

Thin nuts with small widths across flats - Coarse pitch thread, fine pitch thread

AS/NZS 4291.2:1995 紧固件的机械性能．有规定保证载荷值的螺母．粗牙螺纹

Specifies materials, mechanical properties and marking requirements for steel nuts of property classes 4, 5, 6, 8, 9, 10 and 12 with ISO metric coarse

Mechanical properties of fasteners - Nuts with specified proof load values - Coarse thread

DIN EN ISO 8674:2022-06 紧固件 六角高螺母（2 型） 带细牙螺纹

Fasteners - Hexagon high nuts (style 2), with fine pitch thread (ISO/DIS 8674.2:2022); German and English version prEN ISO 8674:2022 / Note: Date of issue 2022-04-29*Intended as replacement for DIN EN ISO 8674 (2013-04).

ISO/FDIS 8675 紧固件 — 六角薄螺母（0 型），带细牙螺纹

Fasteners — Hexagon thin nuts (style 0), with fine pitch thread

ISO 8675:2023 紧固件 六角薄螺母（0 型） 带细牙螺纹

Fasteners — Hexagon thin nuts (style 0), with fine pitch thread

BS EN ISO 8675:2023 紧固件 六角薄螺母（0 型），带细牙螺纹

Fasteners. Hexagon thin nuts (style 0), with fine pitch thread

DIN EN ISO 898-5:2012-09 碳钢和合金钢紧固件的机械性能第5部分：紧定螺钉和具有规定硬度等级的类似螺纹紧固件粗牙螺纹和细牙螺纹

Mechanical properties of fasteners made of carbon steel and alloy steel - Part 5: Set screws and similar threaded fasteners with specified hardness classes - Coarse thread and fine pitch thread (ISO 898-5:2012); German version EN ISO 898-5:2012

GOST R ISO 898-2-2013 碳钢和合金钢制紧固件机械性能. 第2部分. 带有粗牙螺纹和细牙螺纹的规定性能等级的螺母

Mechanical properties of fasteners made of carbon steel and alloy steel. Part 2. Nuts with specified property classes with coarse thread and fine pitch thread