SECT F- 节 锁定紧固件
Section F - Locking Fasteners
SAE AMS3136F-2016 涂层材料 酚醛树脂 聚四氟乙烯填充颜料 150°C（302°F）固化
Type: This specification covers a pigmented phenolic-resin-base coating material@ filled with polytetrafluoroethylene (PTFE)@ supplied in kit form
Coating Material@ Phenolic Resin@ PTFE Filled Pigmented@ 150 °C (302 °F) Cure
HJ 873-2017 土壤 水溶性氟化物和总氟化物的测定 离子选择电极法
本标准规定了测定土壤中水溶性氟化物和总氟化物的离子选择电极法。 本标准适用于土壤中水溶性氟化物和总氟化物的测定。 当称样量为 5.0g，试样移取量为 40.0ml时，本标准测定水溶性氟化物的方法检出限为 0.7 mg/kg，测定下限为 2.8 mg/kg，测定上限为 125mg/kg；当称样量为
Soil-Determination of water soluble fluoride and total fluoride - Ion selective electrode method
DOD A-A-51488 B-1990 牙科氟化物试用托盘(用以代替:DOD A-A-0051488)
This Commercial Item Description covers dental fluoride application trays suitable for the simultaneous application of fluoride gel to the upper
FLUORIDE APPLICATION TRAY, DENTAL [Use In Lieu Of: DOD A-A-0051488]
DLA MIL-PRF-19500/662 F-2013 半导体器件、晶体管、场效应辐射硬化 P 沟道、硅、类型 2N7422、2N7422U、2N7423 和 2N7423U、JANTXVR 和 F 以及 JANSR 和 F
SEMICONDUCTOR DEVICE, TRANSISTOR, FIELD EFFECT RADIATION HARDENED P-CHANNEL, SILICON, TYPES 2N7422, 2N7422U, 2N7423, AND 2N7423U, JANTXVR AND F AND JANSR AND F
GME QK 000350-1983 含30%玻璃珠(以重量计)和15%聚四氟乙烯(PTFE)(以重量计)的乙缩醛共聚物.德语
Acetal-Copolymer (POM) mit 30 Massenanteil in % Glaskugeln und 15 Massenanteil in % PTFE Acetal-Copolymer (POM) with 30 % By Mass Glass Spheres and 15 % by Mass PTFE German
ASTM D3296-98 (FEP)氟化乙丙烯-碳氟化合物管
1.1 The tubing is intended for electrical, mechanical, chemical, and medical applications manufactured from extrusion resins made from
Standard Specification for FEP-Fluorocarbon Tube
CNS 5588-1980 氟碳化合物
本标准适用于冷媒用氟碳化合物
Fluorocarbons
NAVY MIL-F-1183 J SUPP 1A-1987 铸造青铜银焊固定管道总说明书(用以代替NAVY MIL-F-001183 F)
This supplement forms a part of MIL-DTL-915G dated 22 August 2002
FITTINGS, PIPE, CAST BRONZE, SILVER-BRAZING, GENERAL SPECIFICATION FOR [Use In Lieu Of: NAVY MIL-F-001183 F]
ASHRAE QC-06-042-2006 氟乙烷混合物燃烧的反应化学计量
Reaction Stoichiometry for Combustion of Fluoroethane Blends
ASTM F1673-95 聚偏二乙烯氟化物(PVDF)腐蚀性废弃物排放系统的标准规范
1.1 This specification covers requirements for polyvinylidene drainage systems for corrosive applications. Requirements for material, pipe
Standard Specification for Polyvinylidene Fluoride (PVDF) Corrosive Waste Drainage Systems
ASTM F1673-02 聚偏二乙烯氟化物(PVDF)腐蚀性废弃物排放系统的标准规范
1.1 This specification covers requirements for polyvinylidene drainage systems for corrosive applications. Requirements for material, pipe
Standard Specification for Polyvinylidene Fluoride (PVDF) Corrosive Waste Drainage Systems
SAE AMS3265F-2020 密封化合物，聚硫化物（T）橡胶，耐燃油，非铬酸盐腐蚀抑制，间歇使用至 360°F（182°C）
This specification covers polysulfide rubber sealing compounds containing only non-chromated corrosion inhibitors, supplied as a two-component system
Sealing Compound, Polysulfide (T) Rubber, Fuel Resistant, Non-Chromated Corrosion Inhibiting for Intermittent Use to 360 °F (182 °C)
SAE AMS2516F-2018 聚四氟乙烯（PTFE）树脂涂层 High Build 698 至 752°F（370 至 400°C）融合
Purpose This specification establishes the engineering requirements for producing thick coatings of polytetrafluoroethylene (PTFE) resin on parts
Polytetrafluoroethylene (PTFE) Resin Coating High Build@ 698 to 752 °F (370 to 400 °C) Fusion.
S.I.249 Pt.209-1962 水测试：氟化物
The test is intended for the determination of the Fluoride (F') con-tent in water for domestic use
TESTING OF WATER : FLUORIDES
SECT F- 节 锁定紧固件
Section F - Locking Fasteners
SAE AMS3136F-2016 涂层材料 酚醛树脂 聚四氟乙烯填充颜料 150°C（302°F）固化
Type: This specification covers a pigmented phenolic-resin-base coating material@ filled with polytetrafluoroethylene (PTFE)@ supplied in kit form
Coating Material@ Phenolic Resin@ PTFE Filled Pigmented@ 150 °C (302 °F) Cure
HJ 873-2017 土壤 水溶性氟化物和总氟化物的测定 离子选择电极法
本标准规定了测定土壤中水溶性氟化物和总氟化物的离子选择电极法。 本标准适用于土壤中水溶性氟化物和总氟化物的测定。 当称样量为 5.0g，试样移取量为 40.0ml时，本标准测定水溶性氟化物的方法检出限为 0.7 mg/kg，测定下限为 2.8 mg/kg，测定上限为 125mg/kg；当称样量为
Soil-Determination of water soluble fluoride and total fluoride - Ion selective electrode method
DOD A-A-51488 B-1990 牙科氟化物试用托盘(用以代替:DOD A-A-0051488)
This Commercial Item Description covers dental fluoride application trays suitable for the simultaneous application of fluoride gel to the upper
FLUORIDE APPLICATION TRAY, DENTAL [Use In Lieu Of: DOD A-A-0051488]
DLA MIL-PRF-19500/662 F-2013 半导体器件、晶体管、场效应辐射硬化 P 沟道、硅、类型 2N7422、2N7422U、2N7423 和 2N7423U、JANTXVR 和 F 以及 JANSR 和 F
SEMICONDUCTOR DEVICE, TRANSISTOR, FIELD EFFECT RADIATION HARDENED P-CHANNEL, SILICON, TYPES 2N7422, 2N7422U, 2N7423, AND 2N7423U, JANTXVR AND F AND JANSR AND F
GME QK 000350-1983 含30%玻璃珠(以重量计)和15%聚四氟乙烯(PTFE)(以重量计)的乙缩醛共聚物.德语
Acetal-Copolymer (POM) mit 30 Massenanteil in % Glaskugeln und 15 Massenanteil in % PTFE Acetal-Copolymer (POM) with 30 % By Mass Glass Spheres and 15 % by Mass PTFE German
ASTM D3296-98 (FEP)氟化乙丙烯-碳氟化合物管
1.1 The tubing is intended for electrical, mechanical, chemical, and medical applications manufactured from extrusion resins made from
Standard Specification for FEP-Fluorocarbon Tube
CNS 5588-1980 氟碳化合物
本标准适用于冷媒用氟碳化合物
Fluorocarbons
NAVY MIL-F-1183 J SUPP 1A-1987 铸造青铜银焊固定管道总说明书(用以代替NAVY MIL-F-001183 F)
This supplement forms a part of MIL-DTL-915G dated 22 August 2002
FITTINGS, PIPE, CAST BRONZE, SILVER-BRAZING, GENERAL SPECIFICATION FOR [Use In Lieu Of: NAVY MIL-F-001183 F]
ASHRAE QC-06-042-2006 氟乙烷混合物燃烧的反应化学计量
Reaction Stoichiometry for Combustion of Fluoroethane Blends
ASTM F1673-95 聚偏二乙烯氟化物(PVDF)腐蚀性废弃物排放系统的标准规范
1.1 This specification covers requirements for polyvinylidene drainage systems for corrosive applications. Requirements for material, pipe
Standard Specification for Polyvinylidene Fluoride (PVDF) Corrosive Waste Drainage Systems
ASTM F1673-02 聚偏二乙烯氟化物(PVDF)腐蚀性废弃物排放系统的标准规范
1.1 This specification covers requirements for polyvinylidene drainage systems for corrosive applications. Requirements for material, pipe
Standard Specification for Polyvinylidene Fluoride (PVDF) Corrosive Waste Drainage Systems
SAE AMS3265F-2020 密封化合物，聚硫化物（T）橡胶，耐燃油，非铬酸盐腐蚀抑制，间歇使用至 360°F（182°C）
This specification covers polysulfide rubber sealing compounds containing only non-chromated corrosion inhibitors, supplied as a two-component system
Sealing Compound, Polysulfide (T) Rubber, Fuel Resistant, Non-Chromated Corrosion Inhibiting for Intermittent Use to 360 °F (182 °C)
SAE AMS2516F-2018 聚四氟乙烯（PTFE）树脂涂层 High Build 698 至 752°F（370 至 400°C）融合
Purpose This specification establishes the engineering requirements for producing thick coatings of polytetrafluoroethylene (PTFE) resin on parts
Polytetrafluoroethylene (PTFE) Resin Coating High Build@ 698 to 752 °F (370 to 400 °C) Fusion.
S.I.249 Pt.209-1962 水测试：氟化物
The test is intended for the determination of the Fluoride (F') con-tent in water for domestic use
TESTING OF WATER : FLUORIDES
编辑：北检院编辑部
