呆扳手,梅花扳手,两用扳手检测

GB/T 4388-1995 呆扳手、梅花扳手、两用扳手的型式

本标准规定了呆扳手、梅花扳手、两用扳手的型式。 本标准适用于GB/T 4625中规定的呆扳手、梅花扳手、两用扳手（编号分别为1、3、4、5、6、7、8、9、10、11、13、14

Types of open-end wrenches, box wrenches and combination wrenches

GB/T 4388-2008 呆扳手、梅花扳手、两用扳手的型式

本标准规定了扳拧螺栓和螺母或其他紧固件的呆扳手、梅花扳手、两用扳手的型式。本标准的图示仅是示例，并不影响对产品的设计。 本标准适用于GB/T 4625中规定的呆扳手、梅花扳手和两用扳手

Types of open-end wrenches,box wrenches and combination wrenches

GB/T 4393-2008 呆扳手、梅花扳手、两用扳手.技术规范

本标准规定了呆扳手、梅花扳手、两用扳手的技术要求、试验方法、检验规则、包装、标志、运输与贮存。 本标准适用于扳拧螺栓和螺母或其他坚固件的呆扳手、梅花扳手、两用扳手

Open end wrenches,box wrenches and combination wrenches.Technical specifications

GB/T 4393-1995 呆扳手、梅花扳手、两用扳手 技术规范

本标准规定了呆扳手、梅花扳手、两用扳手的技术要求、试验方法、检验规则、包装、标志、运输与贮存。 本标准适用于呆扳手、梅花扳手、两用扳手

Open-end wrenches, box wrenches and combination wrenches--Technical specifications

SANS 1112:1976 呆扳手，梅花扳手和两用扳手

This part of ISO 835 specifies requirements for three inter nationally acceptable series of graduated pipettes, for which nc waiting time is specified

Open-end, box, and combination wrenches

SANS 1112:2008 呆扳手、梅花扳手和两用扳手

Covers the requirements for the material, dimensions, performance, and finish of three types of wrenches that are commonly referred to as spanners

Open-end, box, and combination wrenches

GB/T 4389-2013 双头呆扳手、双头梅花扳手、两用扳手 头部外形的最大尺寸

本标准规定了双头呆扳手、双头梅花扳手、两用扳手头部外形的最大尺寸。本标准适用于扳拧螺栓和螺母或其他紧固件的呆扳手、梅花扳手和两用扳手,上述扳手的命名与术语按照GB/T 4625的规定

Double-headed open-ended wrenches,double-headed box wrenches and combination wrenches.Maximum widths of heads

GB/T 4389-1995 螺钉与螺母的装配工具 双头呆扳手、双头梅花扳手、两用扳手头部外形的最大尺寸

本标准规定了呆扳手、梅花扳手、两用扳手头部外形的最大尺寸。 本标准适用于GB/T 4625中规定的呆扳手、梅花扳手、两用扳手、敲击呆扳手和敲击梅花扳手（编号分别为1、3、4、5、6、7、8、9、10、11、13、14

Assembly tool for screws and nuts--open-end double-head engineers wrenches, double-head box wrenches and combination wrenches--Maximum outside dimensions of heads

ISO 3318:2009 螺钉和螺母用装配工具.双头呆扳手,双头梅花扳手和两用扳手.头部的最大宽度

Assembly tools for screws and nuts - Double-headed open-ended wrenches, double-headed box wrenches and combination wrenches - Maximum widths of heads

ISO 3318:1990 螺钉和螺母用装配工具 双头呆扳手、双头梅花扳手和两用扳手 头部外形最大宽度

Specifies the maximum outside head dimensions for wrenches, listed in ISO 1703 under numbers 4 and 8 to 14, except for wrench No. 12. Tabulates widths

Assembly tools for screws and nuts; double-headed open-ended wrenches, double-headed ring wrenches and combination wrenches; maximum widths of heads

GB/T 4392-1995 敲击呆扳手和敲击梅花扳手

本标准规定了敲击呆扳手和敲击梅花扳手的型式、基本尺寸、技术要求。 本标准适用于敲击呆扳手和敲击梅花扳手

Slugging open-end wrenches and slugging box wrenches

GB/T 4392-2019 敲击呆扳手和敲击梅花扳手

Slugging open-end wrenches and slugging box-end wrenches

CGSB 39-GP-11C-1986 梅花扳手、开口扳手与两用扳手(英制)

Wrenches, Box, Open End, and Combination, (Inch Series

Wrenches, Box, Open End, and Combination, (Inch Series)

QB/T 3001-2008 呆扳手

本标准规定了呆扳手的产品分类、技术要求、试验方法、检验规则与包装、标志、运输、贮存。 本标准适用于扳拧螺栓和螺母或其他坚固件的呆扳手

Open ended wrenches

SNI 05-0790-1989 开口扳手. 梅花扳手与套筒扳手

Open-end wrenches, box wrenches and manual socket wrenches

GB/T 4388-1995 呆扳手、梅花扳手、两用扳手的型式

本标准规定了呆扳手、梅花扳手、两用扳手的型式。 本标准适用于GB/T 4625中规定的呆扳手、梅花扳手、两用扳手（编号分别为1、3、4、5、6、7、8、9、10、11、13、14

Types of open-end wrenches, box wrenches and combination wrenches

GB/T 4388-2008 呆扳手、梅花扳手、两用扳手的型式

本标准规定了扳拧螺栓和螺母或其他紧固件的呆扳手、梅花扳手、两用扳手的型式。本标准的图示仅是示例，并不影响对产品的设计。 本标准适用于GB/T 4625中规定的呆扳手、梅花扳手和两用扳手

Types of open-end wrenches,box wrenches and combination wrenches

GB/T 4393-2008 呆扳手、梅花扳手、两用扳手.技术规范

本标准规定了呆扳手、梅花扳手、两用扳手的技术要求、试验方法、检验规则、包装、标志、运输与贮存。 本标准适用于扳拧螺栓和螺母或其他坚固件的呆扳手、梅花扳手、两用扳手

Open end wrenches,box wrenches and combination wrenches.Technical specifications

GB/T 4393-1995 呆扳手、梅花扳手、两用扳手 技术规范

本标准规定了呆扳手、梅花扳手、两用扳手的技术要求、试验方法、检验规则、包装、标志、运输与贮存。 本标准适用于呆扳手、梅花扳手、两用扳手

Open-end wrenches, box wrenches and combination wrenches--Technical specifications

SANS 1112:1976 呆扳手，梅花扳手和两用扳手

This part of ISO 835 specifies requirements for three inter nationally acceptable series of graduated pipettes, for which nc waiting time is specified

Open-end, box, and combination wrenches

SANS 1112:2008 呆扳手、梅花扳手和两用扳手

Covers the requirements for the material, dimensions, performance, and finish of three types of wrenches that are commonly referred to as spanners

Open-end, box, and combination wrenches

GB/T 4389-2013 双头呆扳手、双头梅花扳手、两用扳手 头部外形的最大尺寸

本标准规定了双头呆扳手、双头梅花扳手、两用扳手头部外形的最大尺寸。本标准适用于扳拧螺栓和螺母或其他紧固件的呆扳手、梅花扳手和两用扳手,上述扳手的命名与术语按照GB/T 4625的规定

Double-headed open-ended wrenches,double-headed box wrenches and combination wrenches.Maximum widths of heads

GB/T 4389-1995 螺钉与螺母的装配工具 双头呆扳手、双头梅花扳手、两用扳手头部外形的最大尺寸

本标准规定了呆扳手、梅花扳手、两用扳手头部外形的最大尺寸。 本标准适用于GB/T 4625中规定的呆扳手、梅花扳手、两用扳手、敲击呆扳手和敲击梅花扳手（编号分别为1、3、4、5、6、7、8、9、10、11、13、14

Assembly tool for screws and nuts--open-end double-head engineers wrenches, double-head box wrenches and combination wrenches--Maximum outside dimensions of heads

ISO 3318:2009 螺钉和螺母用装配工具.双头呆扳手,双头梅花扳手和两用扳手.头部的最大宽度

Assembly tools for screws and nuts - Double-headed open-ended wrenches, double-headed box wrenches and combination wrenches - Maximum widths of heads

ISO 3318:1990 螺钉和螺母用装配工具 双头呆扳手、双头梅花扳手和两用扳手 头部外形最大宽度

Specifies the maximum outside head dimensions for wrenches, listed in ISO 1703 under numbers 4 and 8 to 14, except for wrench No. 12. Tabulates widths

Assembly tools for screws and nuts; double-headed open-ended wrenches, double-headed ring wrenches and combination wrenches; maximum widths of heads

GB/T 4392-1995 敲击呆扳手和敲击梅花扳手

本标准规定了敲击呆扳手和敲击梅花扳手的型式、基本尺寸、技术要求。 本标准适用于敲击呆扳手和敲击梅花扳手

Slugging open-end wrenches and slugging box wrenches

GB/T 4392-2019 敲击呆扳手和敲击梅花扳手

Slugging open-end wrenches and slugging box-end wrenches

CGSB 39-GP-11C-1986 梅花扳手、开口扳手与两用扳手(英制)

Wrenches, Box, Open End, and Combination, (Inch Series

Wrenches, Box, Open End, and Combination, (Inch Series)

QB/T 3001-2008 呆扳手

本标准规定了呆扳手的产品分类、技术要求、试验方法、检验规则与包装、标志、运输、贮存。 本标准适用于扳拧螺栓和螺母或其他坚固件的呆扳手

Open ended wrenches

SNI 05-0790-1989 开口扳手. 梅花扳手与套筒扳手

Open-end wrenches, box wrenches and manual socket wrenches