已钻孔及预组装的锁和碰锁检测

ANSI/BHMA A156.2-2011 已钻孔及预装配门锁及其锁舌

This Standard establishes performance requirements for bored and preassembled locks and latches, and includes cycle tests, strength tests, operational

Bored and Preassembled Locks and Latches

A156.2-2003 钻孔和预组装锁和闩锁

This Standard establishes performance requirements for bored and preassembled locks and latches@ and includes cycle tests@ strength tests@ operational

Bored and Preassembled Locks & Latches

A156.2-1996 钻孔和预组装锁和闩锁

Bored and Preassembled Locks & Latches

BHMA A156.2-2003 钻孔,预装锁及锁芯

Tests described in this Standard are performed under laboratory conditions. In actual usage, results vary because of installation, door and frame

Bored and Preassembled Locks& Latches

A156.2-1989 钻孔和预组装锁和闩锁（BHMA 601）

Bored and Preassembled Locks & Latches (BHMA 601)

A156.2-2011 钻孔和预装锁和插销

This Standard establishes performance requirements for bored and preassembled locks and latches@ and includes cycle tests@ strength tests@ operational

BORED AND PREASSEMBLED LOCKS AND LATCHES

A156.2-2017 钻孔和预装锁和插销

This Standard establishes performance requirements for bored and preassembled locks and latches@ and includes dimensional criteria@ operational tests@

BORED AND PREASSEMBLED LOCKS AND LATCHES

ANSI/BHMA A156.2-2017 钻孔和预装锁和插销

BORED AND PREASSEMBLED LOCKS AND LATCHES

BHMA A156.2-2011 钻孔的和预装配锁具和门窗闩件

BORED AND PREASSEMBLED LOCKS AND LATCHES

A156.34-2016 带防连字饰边的钻孔锁和插芯锁

This Standard defines requirements and test methods for ligature resistant trim on bored locks and mortise locks. These requirements apply

BORED LOCKS AND MORTISE LOCKS WITH LIGATURE RESISTANT TRIM

A156.34-2019 带防连字饰边的钻孔锁和插芯锁

This Standard defines requirements and test methods for ligature resistant trim on bored locks and mortise locks. These requirements apply

BORED LOCKS AND MORTISE LOCKS WITH LIGATURE RESISTANT TRIM

NAS9922-2009 螺丝@ 帽@ 张力@ 内部扳手@ 未钻孔和钻孔@ 锁定和非锁定@ 6AL-4V 钛@ 160 KSI FTU

SCREW@ CAP@ TENSION@ INTERNAL WRENCHING@ UNDRILLED AND DRILLED@ LOCKING AND NON-LOCKING@ 6AL-4V TITANIUM@ 160 KSI FTU

MS 1062-1986 建筑用钻孔锁和插销规范

This standard specifies tests and levels of performance for bored locks and latches for doors in buildings

NAS9922-2014 螺钉@ 帽@ 张力@ 内部扳手@ 未钻孔和钻孔@ 锁定和非锁定@ 6AL-4V 钛@ 160 KSI Ftu (Rev 1)

SCREW@ CAP@ TENSION@ INTERNAL WRENCHING@ UNDRILLED AND DRILLED@ LOCKING AND NON-LOCKING@ 6AL-4V TITANIUM@ 160 KSI Ftu (Rev 1)

GAT 73-2015 机械防盗锁 GAT 73-2015 机械防盗锁

GAT 73-2015 Mechanical anti-theft lock

ANSI/BHMA A156.2-2011 已钻孔及预装配门锁及其锁舌

This Standard establishes performance requirements for bored and preassembled locks and latches, and includes cycle tests, strength tests, operational

Bored and Preassembled Locks and Latches

A156.2-2003 钻孔和预组装锁和闩锁

This Standard establishes performance requirements for bored and preassembled locks and latches@ and includes cycle tests@ strength tests@ operational

Bored and Preassembled Locks & Latches

A156.2-1996 钻孔和预组装锁和闩锁

Bored and Preassembled Locks & Latches

BHMA A156.2-2003 钻孔,预装锁及锁芯

Tests described in this Standard are performed under laboratory conditions. In actual usage, results vary because of installation, door and frame

Bored and Preassembled Locks& Latches

A156.2-1989 钻孔和预组装锁和闩锁（BHMA 601）

Bored and Preassembled Locks & Latches (BHMA 601)

A156.2-2011 钻孔和预装锁和插销

This Standard establishes performance requirements for bored and preassembled locks and latches@ and includes cycle tests@ strength tests@ operational

BORED AND PREASSEMBLED LOCKS AND LATCHES

A156.2-2017 钻孔和预装锁和插销

This Standard establishes performance requirements for bored and preassembled locks and latches@ and includes dimensional criteria@ operational tests@

BORED AND PREASSEMBLED LOCKS AND LATCHES

ANSI/BHMA A156.2-2017 钻孔和预装锁和插销

BORED AND PREASSEMBLED LOCKS AND LATCHES

BHMA A156.2-2011 钻孔的和预装配锁具和门窗闩件

BORED AND PREASSEMBLED LOCKS AND LATCHES

A156.34-2016 带防连字饰边的钻孔锁和插芯锁

This Standard defines requirements and test methods for ligature resistant trim on bored locks and mortise locks. These requirements apply

BORED LOCKS AND MORTISE LOCKS WITH LIGATURE RESISTANT TRIM

A156.34-2019 带防连字饰边的钻孔锁和插芯锁

This Standard defines requirements and test methods for ligature resistant trim on bored locks and mortise locks. These requirements apply

BORED LOCKS AND MORTISE LOCKS WITH LIGATURE RESISTANT TRIM

NAS9922-2009 螺丝@ 帽@ 张力@ 内部扳手@ 未钻孔和钻孔@ 锁定和非锁定@ 6AL-4V 钛@ 160 KSI FTU

SCREW@ CAP@ TENSION@ INTERNAL WRENCHING@ UNDRILLED AND DRILLED@ LOCKING AND NON-LOCKING@ 6AL-4V TITANIUM@ 160 KSI FTU

MS 1062-1986 建筑用钻孔锁和插销规范

This standard specifies tests and levels of performance for bored locks and latches for doors in buildings

NAS9922-2014 螺钉@ 帽@ 张力@ 内部扳手@ 未钻孔和钻孔@ 锁定和非锁定@ 6AL-4V 钛@ 160 KSI Ftu (Rev 1)

SCREW@ CAP@ TENSION@ INTERNAL WRENCHING@ UNDRILLED AND DRILLED@ LOCKING AND NON-LOCKING@ 6AL-4V TITANIUM@ 160 KSI Ftu (Rev 1)

GAT 73-2015 机械防盗锁 GAT 73-2015 机械防盗锁

GAT 73-2015 Mechanical anti-theft lock