TB/T 46-1995 车辆用上下心盘技术条件
本标准规定了铁道车辆用上、下心盘的技术要求、检验规则和标志等。 本标准适用于铁道车辆用上、下心盘的设计和制造
Technical conditions for upper and lower center discs for vehicles
TB/T 3270-2011 铁道货车心盘磨耗盘
本标准规定了铁道货车心盘磨耗盘的技术要求、检验方法、检验规则、标志、包装、运输和贮存等。 本标准适用于铁道货车转向架用心盘磨耗盘的制造与检验
Center wear plate of railway freight wagons
TB/T 3011-2001 铁道通用货车上心盘疲劳试验及评定方法
本标准规定了铁道通用货车上心盘疲劳试验及评定方法。 本标准适用于铁道通用货车用新造平面上心盘
Fatigue test and evaluation method of the upper center plate of railway general freight car
ARMY MIL-L-43693 A-1991 客货下降装置
This specification covers one type of device for lawering perconne1or cargofmn elevations of 150 feet or less. P-t of the coqlete W l y or certain
LOWERING DEVICE, PERSONNEL AND CARGO
TB/T 3198.2-2008 铁路货车心盘及磨耗盘专用量具第2部分：心盘及磨耗盘检修用量具
本部分规定了铁道货车心盘及磨耗盘检修用量具的形式与尺寸、要求、标志与包装等。 本部分适用于铁道货车转K2型、转K4型、转K6型、转K7型、转8G型、转8AG型、转8B型、转8AB型、转8A型转向架用平面下心盘及心盘磨耗盘，与之配套的平面及整体上心盘（以下分别简称为K2、K4、K5、K6、K7、8G
Dedicated measuring tools for the center plate and wear plate on freight car Part 2:Measuring tools for the overhaul of center plate and wear plate
TB/T 3198.1-2008 铁路货车心盘及磨耗盘专用量具第1部分：心盘及磨耗盘制造用量具
本部分规定了铁道货车心盘及磨耗盘制造用量具的形式与尺寸、要求、标志与包装等。 本部分适用于铁道货车转K2型、转K4型、转K6型、转K7型、转8G型、转8AG型、转8B型、转8AB型、转8A型转向架用平面下心盘及心盘磨耗盘，与之配套的平面及整体上心盘（以下分别简称为K2、K4、K5、K6、K7、8G
Dedicated measuring tools for the center plate and wear plate on freight car Part 1:Measuring tools for the manufacture of center plate and wear plate
T/ZZB 1699-2020 客车转向盘
本标准规定了客车转向盘（以下简称“转向盘”）的术语和定义、基本要求、技术要求、试验方法、检验规则、包装、标志、运输和贮存、质量承诺。 本标准适用于以全水发泡聚氨酯泡沫为包覆层材料的客车转向盘
Bus steering wheel
T/CASMES 79-2022 客车转向盘
本文件规定了客车转向盘的术语和定义、技术要求、试验方法、检验规则、包装、标志、运输和贮存。 本文件适用于以全水发泡聚氨酯泡沫为包覆层材料的客车转向盘
Bus steering wheel
KS R 2059-2007 货车、客车平液阀门
이 규격은 트럭 및 버스용 공기 스프링 장치에 사용하는 레벨링 밸브에 대해서 규정한다
Levelling valve for trucks and buses
JIS B 8930:1993 托盘货车
Pallet trucks
BS EN 1757-2:2001 工业货车安全.脚踏货车.托盘货车
1 This standard applies to pallet trucks as defined in 3.1 with lift heights up to 300 mm and rated capacities up to and including 2 000 kg
Safety of industrial trucks - Pedestrian propelled trucks - Pallet trucks
TZ 005-1995(下) 国内卫星通信网技术体制（试行）（下册）
Domestic Satellite Communication Network Technology System (Trial Implementation) (Volume 2)
KS R 2057-2002 货车、客车用空气弹簧
이 규격은 트럭ㆍ버스의 차체 현가에 사용하는 공기 스프링 몸체에 대하여 규정한다
Air spring for trucks and buses
AS 1973:1993 充气轮胎.客车、轻形货车和货/客两用车.胎面翻新和修补
Sets out a Code of Practice for the retreading of pneumatic diagonal and radial ply tyres including requirements for initial inspection, processing
Pneumatic tyres - Passenger car, light truck, and truck/bus - Retreading and repair processes
PN D94018-1960 货车仪表盘
Przedmiotem normy sq panele, klejone z listewek nieob?ogowane p?yty drewniane, u?ywane do wykonywania wn?trz wagonów kolejowych
Wagon panel
TB/T 46-1995 车辆用上下心盘技术条件
本标准规定了铁道车辆用上、下心盘的技术要求、检验规则和标志等。 本标准适用于铁道车辆用上、下心盘的设计和制造
Technical conditions for upper and lower center discs for vehicles
TB/T 3270-2011 铁道货车心盘磨耗盘
本标准规定了铁道货车心盘磨耗盘的技术要求、检验方法、检验规则、标志、包装、运输和贮存等。 本标准适用于铁道货车转向架用心盘磨耗盘的制造与检验
Center wear plate of railway freight wagons
TB/T 3011-2001 铁道通用货车上心盘疲劳试验及评定方法
本标准规定了铁道通用货车上心盘疲劳试验及评定方法。 本标准适用于铁道通用货车用新造平面上心盘
Fatigue test and evaluation method of the upper center plate of railway general freight car
ARMY MIL-L-43693 A-1991 客货下降装置
This specification covers one type of device for lawering perconne1or cargofmn elevations of 150 feet or less. P-t of the coqlete W l y or certain
LOWERING DEVICE, PERSONNEL AND CARGO
TB/T 3198.2-2008 铁路货车心盘及磨耗盘专用量具第2部分：心盘及磨耗盘检修用量具
本部分规定了铁道货车心盘及磨耗盘检修用量具的形式与尺寸、要求、标志与包装等。 本部分适用于铁道货车转K2型、转K4型、转K6型、转K7型、转8G型、转8AG型、转8B型、转8AB型、转8A型转向架用平面下心盘及心盘磨耗盘，与之配套的平面及整体上心盘（以下分别简称为K2、K4、K5、K6、K7、8G
Dedicated measuring tools for the center plate and wear plate on freight car Part 2:Measuring tools for the overhaul of center plate and wear plate
TB/T 3198.1-2008 铁路货车心盘及磨耗盘专用量具第1部分：心盘及磨耗盘制造用量具
本部分规定了铁道货车心盘及磨耗盘制造用量具的形式与尺寸、要求、标志与包装等。 本部分适用于铁道货车转K2型、转K4型、转K6型、转K7型、转8G型、转8AG型、转8B型、转8AB型、转8A型转向架用平面下心盘及心盘磨耗盘，与之配套的平面及整体上心盘（以下分别简称为K2、K4、K5、K6、K7、8G
Dedicated measuring tools for the center plate and wear plate on freight car Part 1:Measuring tools for the manufacture of center plate and wear plate
T/ZZB 1699-2020 客车转向盘
本标准规定了客车转向盘（以下简称“转向盘”）的术语和定义、基本要求、技术要求、试验方法、检验规则、包装、标志、运输和贮存、质量承诺。 本标准适用于以全水发泡聚氨酯泡沫为包覆层材料的客车转向盘
Bus steering wheel
T/CASMES 79-2022 客车转向盘
本文件规定了客车转向盘的术语和定义、技术要求、试验方法、检验规则、包装、标志、运输和贮存。 本文件适用于以全水发泡聚氨酯泡沫为包覆层材料的客车转向盘
Bus steering wheel
KS R 2059-2007 货车、客车平液阀门
이 규격은 트럭 및 버스용 공기 스프링 장치에 사용하는 레벨링 밸브에 대해서 규정한다
Levelling valve for trucks and buses
JIS B 8930:1993 托盘货车
Pallet trucks
BS EN 1757-2:2001 工业货车安全.脚踏货车.托盘货车
1 This standard applies to pallet trucks as defined in 3.1 with lift heights up to 300 mm and rated capacities up to and including 2 000 kg
Safety of industrial trucks - Pedestrian propelled trucks - Pallet trucks
TZ 005-1995(下) 国内卫星通信网技术体制（试行）（下册）
Domestic Satellite Communication Network Technology System (Trial Implementation) (Volume 2)
KS R 2057-2002 货车、客车用空气弹簧
이 규격은 트럭ㆍ버스의 차체 현가에 사용하는 공기 스프링 몸체에 대하여 규정한다
Air spring for trucks and buses
AS 1973:1993 充气轮胎.客车、轻形货车和货/客两用车.胎面翻新和修补
Sets out a Code of Practice for the retreading of pneumatic diagonal and radial ply tyres including requirements for initial inspection, processing
Pneumatic tyres - Passenger car, light truck, and truck/bus - Retreading and repair processes
PN D94018-1960 货车仪表盘
Przedmiotem normy sq panele, klejone z listewek nieob?ogowane p?yty drewniane, u?ywane do wykonywania wn?trz wagonów kolejowych
Wagon panel
编辑：北检院编辑部
