T/YNZJ 006-2022 聚烯烃塑料瓶
本文件规定了聚烯烃塑料瓶的产品分类、生产卫生规范、原辅材料食品安全要求、要求、试验方法、检验规则、标志、包装、运输及贮存。 本文件适用于以聚乙烯树脂或聚丙烯树脂为主要原料，经挤吹或注吹等工艺加工成型的聚烯烃塑料瓶
polyolefin plastic bottle
T/YNSX 12-2020 生态降解聚烯烃塑料袋
本文件规定了生态降解聚烯烃塑料袋的术语和定义、产品分类、技术要求、试验方法、检验规则和标志、包装、运输、贮存。 本文件适用于以低密度聚乙烯(LDPE)、线性低密度聚乙烯(LLDPE)、高密度聚乙烯(HDPE)、聚丙烯（PP）、乙烯－醋酸乙烯共聚（EVA）等聚烯烃树脂为主要原料，适量添加生态降解
Eco-degradable polyolefin plastic bag
DB53/T 412-2012 氧化生物降解聚烯烃塑料袋
本标准规定了氧化生物降解聚烯烃塑料袋的术语和定义、分类、技术要求、试验方法、检验规则及标志、包装、运输、贮存等内容。本标准适用于以低密度聚乙烯(LDPE)、线性低密度聚乙烯(LLDPE)、高密度聚乙烯(HDPE)、聚丙烯（PP）、乙烯－醋酸乙烯共聚（EVA）、珍珠棉（EPE）、塑性淀粉等聚烯烃树脂的
Oxidative biodegradable polyolefin plastic bags
ANSI/ASTM D4819:1997 聚烯烃塑料制软多孔材料规范
This specification applies to flexible closed-cell materials made from polyolefin plastics and blends of polyolefin plastics as defined in Section
Specification for Flexible Cellular Materials Made From Polyolefin Plastics
ASTM D4819-96 聚烯烃塑料制软多孔材料标准规范
1.1 This specification applies to flexible closed-cell materials made from polyolefin plastics and blends of polyolefin plastics as defined
Standard Specification for Flexible Cellular Materials Made From Polyolefin Plastics
ASTM D4819-96(2005 聚烯烃塑料制软多孔材料标准规范
1.1 This specification applies to flexible closed-cell materials made from polyolefin plastics and blends of polyolefin plastics as defined
Standard Specification for Flexible Cellular Materials Made From Polyolefin Plastics
ASTM D4819-13 聚烯烃塑料制软多孔材料标准规格
1.1 This specification applies to flexible closed-cell materials made from polyolefin plastics
Standard Specification for Flexible Cellular Materials Made From Polyolefin Plastics
ASTM D4819-13(2021)e1 聚烯烃塑料制柔性多孔材料的标准规范
1.1 This specification applies to flexible closed-cell materials made from polyolefin plastics and blends of polyolefin plastics as defined in Section
Standard Specification for Flexible Cellular Materials Made From Polyolefin Plastics
ASTM D7210-06 萃取聚烯烃塑料添加剂的标准实施规程
Separation and identification of additives used in the manufacture of polyolefin plastics is necessary in order to correlate
Standard Practice for Extraction of Additives in Polyolefin Plastics
ASTM D7210-13 萃取聚烯烃塑料添加剂的标准实施规程
5.1 Separation and identification of additives used in the manufacture
Standard Practice for Extraction of Additives in Polyolefin Plastics
ANSI/ASTM D3149:2006 电绝缘用交连可吸热的聚烯烃塑料管规范
This specification covers flexible and semirigid crosslinked polyolefin heat-shrinkable tubing used for electrical insulating purposes. It is supplied
Specification for Crosslinked Polyolefin Heat-Shrinkable Tubing for Electrical Insulation
ASTM D7210-21 聚烯烃塑料中添加剂提取的标准实施规程
1.1 This practice covers a variety of extraction techniques for antioxidant and slip additives used in polyolefins. Typically, the extracted additives
Standard Practice for Extraction of Additives in Polyolefin Plastics
SAE AMS3634E-2012 热收缩半刚性有选择交联的电绝缘聚烯烃塑料管
This document has been declared "Stabilized" and will no longer be subjected to periodic reviews for currency. Users are responsible for verifying
Tubing, Plastic, Electrical Insulation, Polyolefin, Selectively Crosslinked, Semi-Rigid, Heat Shrinkable
QB/T 2462.1-1999 电线电缆用辐照交联聚烯烃塑料.额定电压0～10kV聚乙烯绝缘料
本标准规定了0~lOkV聚乙烯绝缘料(以F简称绝缘料)的技术要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于聚乙烯树脂为基料加入其它助剂，经混炼、塑化、造粒加工而成的电线电缆用辐照交联绝缘料。其长期允许的工作温度为90℃o
Radiation cross-linked polyolefin plastics for wires and cables Polyethylene insulation materials for a rated voltage of 0-10 kV
SAE AMS3634D-1993 热收缩半刚性电气绝缘和选择性交联的聚烯烃塑料管
This specification covers an irradiated, thermally-stabilized, modified- polyolefin plastic in the form of dual-wall tubing. This tubing has been used
Tubing, Polyolefin Plastic, Electrical Insulation Selectively Crosslinked, Semi-Rigid, Heat-Shrinkable
T/YNZJ 006-2022 聚烯烃塑料瓶
本文件规定了聚烯烃塑料瓶的产品分类、生产卫生规范、原辅材料食品安全要求、要求、试验方法、检验规则、标志、包装、运输及贮存。 本文件适用于以聚乙烯树脂或聚丙烯树脂为主要原料，经挤吹或注吹等工艺加工成型的聚烯烃塑料瓶
polyolefin plastic bottle
T/YNSX 12-2020 生态降解聚烯烃塑料袋
本文件规定了生态降解聚烯烃塑料袋的术语和定义、产品分类、技术要求、试验方法、检验规则和标志、包装、运输、贮存。 本文件适用于以低密度聚乙烯(LDPE)、线性低密度聚乙烯(LLDPE)、高密度聚乙烯(HDPE)、聚丙烯（PP）、乙烯－醋酸乙烯共聚（EVA）等聚烯烃树脂为主要原料，适量添加生态降解
Eco-degradable polyolefin plastic bag
DB53/T 412-2012 氧化生物降解聚烯烃塑料袋
本标准规定了氧化生物降解聚烯烃塑料袋的术语和定义、分类、技术要求、试验方法、检验规则及标志、包装、运输、贮存等内容。本标准适用于以低密度聚乙烯(LDPE)、线性低密度聚乙烯(LLDPE)、高密度聚乙烯(HDPE)、聚丙烯（PP）、乙烯－醋酸乙烯共聚（EVA）、珍珠棉（EPE）、塑性淀粉等聚烯烃树脂的
Oxidative biodegradable polyolefin plastic bags
ANSI/ASTM D4819:1997 聚烯烃塑料制软多孔材料规范
This specification applies to flexible closed-cell materials made from polyolefin plastics and blends of polyolefin plastics as defined in Section
Specification for Flexible Cellular Materials Made From Polyolefin Plastics
ASTM D4819-96 聚烯烃塑料制软多孔材料标准规范
1.1 This specification applies to flexible closed-cell materials made from polyolefin plastics and blends of polyolefin plastics as defined
Standard Specification for Flexible Cellular Materials Made From Polyolefin Plastics
ASTM D4819-96(2005 聚烯烃塑料制软多孔材料标准规范
1.1 This specification applies to flexible closed-cell materials made from polyolefin plastics and blends of polyolefin plastics as defined
Standard Specification for Flexible Cellular Materials Made From Polyolefin Plastics
ASTM D4819-13 聚烯烃塑料制软多孔材料标准规格
1.1 This specification applies to flexible closed-cell materials made from polyolefin plastics
Standard Specification for Flexible Cellular Materials Made From Polyolefin Plastics
ASTM D4819-13(2021)e1 聚烯烃塑料制柔性多孔材料的标准规范
1.1 This specification applies to flexible closed-cell materials made from polyolefin plastics and blends of polyolefin plastics as defined in Section
Standard Specification for Flexible Cellular Materials Made From Polyolefin Plastics
ASTM D7210-06 萃取聚烯烃塑料添加剂的标准实施规程
Separation and identification of additives used in the manufacture of polyolefin plastics is necessary in order to correlate
Standard Practice for Extraction of Additives in Polyolefin Plastics
ASTM D7210-13 萃取聚烯烃塑料添加剂的标准实施规程
5.1 Separation and identification of additives used in the manufacture
Standard Practice for Extraction of Additives in Polyolefin Plastics
ANSI/ASTM D3149:2006 电绝缘用交连可吸热的聚烯烃塑料管规范
This specification covers flexible and semirigid crosslinked polyolefin heat-shrinkable tubing used for electrical insulating purposes. It is supplied
Specification for Crosslinked Polyolefin Heat-Shrinkable Tubing for Electrical Insulation
ASTM D7210-21 聚烯烃塑料中添加剂提取的标准实施规程
1.1 This practice covers a variety of extraction techniques for antioxidant and slip additives used in polyolefins. Typically, the extracted additives
Standard Practice for Extraction of Additives in Polyolefin Plastics
SAE AMS3634E-2012 热收缩半刚性有选择交联的电绝缘聚烯烃塑料管
This document has been declared "Stabilized" and will no longer be subjected to periodic reviews for currency. Users are responsible for verifying
Tubing, Plastic, Electrical Insulation, Polyolefin, Selectively Crosslinked, Semi-Rigid, Heat Shrinkable
QB/T 2462.1-1999 电线电缆用辐照交联聚烯烃塑料.额定电压0～10kV聚乙烯绝缘料
本标准规定了0~lOkV聚乙烯绝缘料(以F简称绝缘料)的技术要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于聚乙烯树脂为基料加入其它助剂，经混炼、塑化、造粒加工而成的电线电缆用辐照交联绝缘料。其长期允许的工作温度为90℃o
Radiation cross-linked polyolefin plastics for wires and cables Polyethylene insulation materials for a rated voltage of 0-10 kV
SAE AMS3634D-1993 热收缩半刚性电气绝缘和选择性交联的聚烯烃塑料管
This specification covers an irradiated, thermally-stabilized, modified- polyolefin plastic in the form of dual-wall tubing. This tubing has been used
Tubing, Polyolefin Plastic, Electrical Insulation Selectively Crosslinked, Semi-Rigid, Heat-Shrinkable
编辑：北检院编辑部
