GB/T 3524-2005 碳素结构钢和低合金结构钢热轧钢带
本标准规定了碳素结构和低合金结构钢热轧钢带的尺寸、外形、技术要求、试验方法、验收规则、包装、标志和质量证明书等规定。本标准使用于厚度不大于12.00mm、宽度50mm～600mm的碳素结构钢和低合金结构热轧钢带
Hot-rolled carbon and low alloy structural steel strips
GB/T 3524-2015 碳素结构钢和低合金结构钢热轧钢带
本标准规定了碳素结构钢和低合金结构钢热轧钢带的分类和代号、订货内容、尺寸、外形、重量及允许偏差、技术要求、试验方法、验收规则、包装、标志和质量证明书等规定。 本标准适用于厚度不大于12.00 mm、宽度不大于600 mm的碳素结构钢和低合金结构钢热轧钢带（以下简称“钢带
Hot-rolled carbon and low alloy structural steel strips
GB/T 3524-1992 碳素结构钢和低合金结构钢热轧钢带
本标准规定了碳素结构钢和低合金结构钢热轧钢带的尺寸、外形、技术要求、试验方法及验收规则等。 本标准适用于厚度2.00～6.00mm、宽度50～600mm的碳素结构钢和低合金结构钢热轧钢带
Hot-rolled cardon and low alloy structural steel strips
GB/T 3274-2017 碳素结构钢和低合金结构钢热轧钢板和钢带
本标准规定了碳素结构钢和低合金结构钢热轧钢板和钢带的订货内容、尺寸、外形、重量、技术要求、试验方法、检验规则、包装、标志及质量证明书。 本标准适用于厚度不大于400 mm 的碳素结构钢和低合金结构钢热轧钢板和钢带(以下简称钢板和钢带
Hot-rolled plates、sheets and strips of carbon structural steels and high strength low alloy structural steels
GB 912-2008 碳素结构钢和低合金结构钢热轧薄钢板和钢带
本标准规定了碳素结构钢和低合金结构钢热轧薄钢板和钢带的订货内容、尺寸、外形、重量及允许偏差、技术要求、试验方法、检验规则、包装、标志和质量证明书等。 本标准适用于厚度小于3mm的碳素结构钢和低合金结构钢热轧薄钢板和钢带
Hot-rolled sheets and strips of carbon structural steels and high strength low alloy structural steels
GB/T 3274-2007 碳素结构钢和低合金结构钢热轧厚钢板和钢带
本标准规定了碳素结构钢和低合金结构钢热轧厚钢板和钢带的订货内容、尺寸、外形、重量及允许偏差、技术要求、试验方法、检验规则、包装、标志和质量证明书等。 本标准适用于厚度为3 mm～400 mm碳素结构钢和低合金结构钢热轧厚钢板和厚度为3 mm～25．4 mm热轧钢带
Hot-rolled plates and strips and strips of carbon structural steels and high strength low alloy structural steels
QJ 910-1985 碳素结构钢和低合金结构钢铸件技术条件
Specifications for castings of carbon structural steel and low alloy structural steel
GB/T 14292-1993 碳素结构钢和低合金结构钢热轧条钢技术条件
本标准规定了碳素结构钢和低合金结构钢热轧条钢的技术要求、试验方法及验收规则等。 本标准适用于碳素结构钢和低合金结构钢热轧棒钢、型钢和异型钢
Hot-rolled long products technical requirements for carbon structure steel and low-alloy structure steel
GB/T 912-2008 碳素结构钢和低合金结构钢热轧薄钢板和钢带
Hot-rolled sheets and strips of carbon structural steels and high strength low alloy structural steels
STAS 11607-1981 低合金碳钢和中合金碳钢光谱摄制仪分析
Prezentul standard stabile?te metoda de analiz? spectrografic? ?n emisie a o?elurilor carbon slab ?i mediu aliate, pentru urm?toarele elemente
LOW AND MEDIUM ALLOYED CARBON STEELS Spectrographic analysis
SAE AMS2259D-2003 可锻低合金钢和碳钢的化学检查分析限值
This specification defines limits of variation for determining acceptability of the chemical composition of wrought low-alloy and carbon steel parts
Chemical Check Analysis Limits Wrought Low-Alloy and Carbon Steels
SAE AMS2259F-2017 锻造低合金钢和碳钢的化学检查分析限值
Purpose This specification defines limits of variation for determining acceptability of the composition of wrought low-alloy and carbon steel parts
Chemical Check Analysis Limits Wrought Low-Alloy and Carbon Steels
SAE AMS2259-1960 锻造低合金钢和碳钢的化学检查分析限值
PURPOSE: To publish standard chemical check analysis limits as established by AISI or AMS usage and to correlate their application and use
CHEMICAL CHECK ANALYSIS LIMITS Wrought Low-Alloy and Carbon Steels
SAE AMS2259E-2012 锻造低合金钢和碳钢的化学检查分析限值
This specification defines limits of variation for determining acceptability of the composition of wrought low-alloy and carbon steel parts
Chemical Check Analysis Limits Wrought Low-Alloy and Carbon Steels
SAE AMS2259B-1992 锻造低合金钢和碳钢的化学检查分析限值
This specification covers standard chemical check analysis limits as established by AMS or AISI usage. The chemical check analysis limits shown herein
CHEMICAL CHECK ANALYSIS LIMITS Wrought Low-Alloy and Carbon Steels
GB/T 3524-2005 碳素结构钢和低合金结构钢热轧钢带
本标准规定了碳素结构和低合金结构钢热轧钢带的尺寸、外形、技术要求、试验方法、验收规则、包装、标志和质量证明书等规定。本标准使用于厚度不大于12.00mm、宽度50mm～600mm的碳素结构钢和低合金结构热轧钢带
Hot-rolled carbon and low alloy structural steel strips
GB/T 3524-2015 碳素结构钢和低合金结构钢热轧钢带
本标准规定了碳素结构钢和低合金结构钢热轧钢带的分类和代号、订货内容、尺寸、外形、重量及允许偏差、技术要求、试验方法、验收规则、包装、标志和质量证明书等规定。 本标准适用于厚度不大于12.00 mm、宽度不大于600 mm的碳素结构钢和低合金结构钢热轧钢带（以下简称“钢带
Hot-rolled carbon and low alloy structural steel strips
GB/T 3524-1992 碳素结构钢和低合金结构钢热轧钢带
本标准规定了碳素结构钢和低合金结构钢热轧钢带的尺寸、外形、技术要求、试验方法及验收规则等。 本标准适用于厚度2.00～6.00mm、宽度50～600mm的碳素结构钢和低合金结构钢热轧钢带
Hot-rolled cardon and low alloy structural steel strips
GB/T 3274-2017 碳素结构钢和低合金结构钢热轧钢板和钢带
本标准规定了碳素结构钢和低合金结构钢热轧钢板和钢带的订货内容、尺寸、外形、重量、技术要求、试验方法、检验规则、包装、标志及质量证明书。 本标准适用于厚度不大于400 mm 的碳素结构钢和低合金结构钢热轧钢板和钢带(以下简称钢板和钢带
Hot-rolled plates、sheets and strips of carbon structural steels and high strength low alloy structural steels
GB 912-2008 碳素结构钢和低合金结构钢热轧薄钢板和钢带
本标准规定了碳素结构钢和低合金结构钢热轧薄钢板和钢带的订货内容、尺寸、外形、重量及允许偏差、技术要求、试验方法、检验规则、包装、标志和质量证明书等。 本标准适用于厚度小于3mm的碳素结构钢和低合金结构钢热轧薄钢板和钢带
Hot-rolled sheets and strips of carbon structural steels and high strength low alloy structural steels
GB/T 3274-2007 碳素结构钢和低合金结构钢热轧厚钢板和钢带
本标准规定了碳素结构钢和低合金结构钢热轧厚钢板和钢带的订货内容、尺寸、外形、重量及允许偏差、技术要求、试验方法、检验规则、包装、标志和质量证明书等。 本标准适用于厚度为3 mm～400 mm碳素结构钢和低合金结构钢热轧厚钢板和厚度为3 mm～25．4 mm热轧钢带
Hot-rolled plates and strips and strips of carbon structural steels and high strength low alloy structural steels
QJ 910-1985 碳素结构钢和低合金结构钢铸件技术条件
Specifications for castings of carbon structural steel and low alloy structural steel
GB/T 14292-1993 碳素结构钢和低合金结构钢热轧条钢技术条件
本标准规定了碳素结构钢和低合金结构钢热轧条钢的技术要求、试验方法及验收规则等。 本标准适用于碳素结构钢和低合金结构钢热轧棒钢、型钢和异型钢
Hot-rolled long products technical requirements for carbon structure steel and low-alloy structure steel
GB/T 912-2008 碳素结构钢和低合金结构钢热轧薄钢板和钢带
Hot-rolled sheets and strips of carbon structural steels and high strength low alloy structural steels
STAS 11607-1981 低合金碳钢和中合金碳钢光谱摄制仪分析
Prezentul standard stabile?te metoda de analiz? spectrografic? ?n emisie a o?elurilor carbon slab ?i mediu aliate, pentru urm?toarele elemente
LOW AND MEDIUM ALLOYED CARBON STEELS Spectrographic analysis
SAE AMS2259D-2003 可锻低合金钢和碳钢的化学检查分析限值
This specification defines limits of variation for determining acceptability of the chemical composition of wrought low-alloy and carbon steel parts
Chemical Check Analysis Limits Wrought Low-Alloy and Carbon Steels
SAE AMS2259F-2017 锻造低合金钢和碳钢的化学检查分析限值
Purpose This specification defines limits of variation for determining acceptability of the composition of wrought low-alloy and carbon steel parts
Chemical Check Analysis Limits Wrought Low-Alloy and Carbon Steels
SAE AMS2259-1960 锻造低合金钢和碳钢的化学检查分析限值
PURPOSE: To publish standard chemical check analysis limits as established by AISI or AMS usage and to correlate their application and use
CHEMICAL CHECK ANALYSIS LIMITS Wrought Low-Alloy and Carbon Steels
SAE AMS2259E-2012 锻造低合金钢和碳钢的化学检查分析限值
This specification defines limits of variation for determining acceptability of the composition of wrought low-alloy and carbon steel parts
Chemical Check Analysis Limits Wrought Low-Alloy and Carbon Steels
SAE AMS2259B-1992 锻造低合金钢和碳钢的化学检查分析限值
This specification covers standard chemical check analysis limits as established by AMS or AISI usage. The chemical check analysis limits shown herein
CHEMICAL CHECK ANALYSIS LIMITS Wrought Low-Alloy and Carbon Steels
编辑：北检院编辑部
