绝热用聚苯乙烯泡沫塑料检测

GB/T 10801.1-2002 绝热用模塑聚苯乙烯泡沫塑料

本标准规定了绝热用模塑聚苯乙烯泡沫塑料板材的分类、要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于可发性聚苯乙烯珠粒经加热预发泡后，在模具中加热成型而制得的具有闭孔结构的使用温度不超过75℃的聚苯乙烯泡沫塑料板材，也适用于大块板材切割而成的材料

Moulded polystyrene foam board for thermal insulation

GB/T 10801.2-2002 绝热用挤塑聚苯乙烯泡沫塑料(XPS)

本标准规定了绝热用挤塑聚苯乙烯泡沫塑料(XPS)的分类、规格、要求、试验方法、检验规则、标志、包装、运输、贮存。 本标准适用于使用温度不超过75℃的绝热用挤塑聚苯乙烯泡沫塑料，也适用于带有塑料、箔片贴面以及带有表面涂层的绝热用挤塑聚苯乙烯泡沫塑料

Rigid extruded polystyrene foam board for thermal insulation (XPS)

GB/T 10801.1-2021 绝热用模塑聚苯乙烯泡沫塑料(EPS)

本文件规定了绝热上用模塑聚葵乙烯泡沫塑料CEPS)的分类,要求.试验方法.检验规则和标志、包装运输、贮存。 本文件适用于可发性聚葵乙烯珠粒经加热预发泡后,在模具中加热成型而制得的具有闭孔结构的使用温度不超过75 的绝热用模塑聚茶乙烯泡沫塑料及其切割而成的制品。 本文件也适用于原料中通过添加石墨等

Moulded polystyrene foam for thermal insulation（EPS）

GB/T 10801.2-2018 绝热用挤塑聚苯乙烯泡沫塑料(XPS)

Rigid extruded polystyrene foam board for thermal insulation(XPS)

DB21/T 2840-2017 绝热用模塑聚苯乙烯泡沫塑料中固体机物的现场快速检测方法

Method for rapid on-site detection of solid inorganic matter in molded polystyrene foam for thermal insulation

DB21/T 2836-2017 渗透剂水溶液增重绝热用模塑聚苯乙烯泡沫塑料的现场快速检测方法

Method for rapid on-site testing of molded polystyrene foam for weight gain insulation with aqueous penetrant

JC/T 2441-2018 建筑绝热用石墨改性模塑聚苯乙烯泡沫塑料板

本标准规定了建筑绝热用石墨改性模塑聚苯乙烯泡沫塑料板的术语和定义、分类、代号和标记、要求、试验方法、检验规则以及标志、包装、运输和贮存。 本标准适用于建筑绝热用石墨改性模塑聚苯乙烯泡沫塑料板(以下简称石墨聚苯板

Graphite modified expanded polystyrene foam board for building thermal insulation

DIN EN 13164:2009 建筑物用绝热产品.工厂制聚苯乙烯泡沫塑料(XPS)产品.规范

This European Standard specifies the requirements for factory made products of extruded polystyrene foam, with or without facings or coatings, which

Thermal insulation products for buildings - Factory made products of extruded polystyrene foam (XPS) - Specification; English version of DIN EN 13164:2009-02

BS EN 14307:2009 建筑设备和工业设施用热绝缘产品.工厂制挤塑聚苯乙烯泡沫塑料（XPS）产品.规范

This European Standard specifies the requirements for factory made extruded polystyrene foam products which are used for the thermal insulation

Thermal insulation products for building equipment and industrial installations - Factory made extruded polystyrene foam (XPS) products - Specification

QB/T 3807-1999 隔热用聚苯乙烯泡沫塑料

Cellular plastics.Polystyrene foam for thermal insulation

STAS 7461-1984 泡沫塑料．泡沫聚苯乙烯

Prezentul standard se refer? la polistirenul celular ob?inut prin expandarea perlelor de polistiren care con?in ?nglobat? o hidrocarbura volatil

Cellular plastics CELL.ULAMR POL YSTYRENE

T/LJH 026-2023 绝热用交联聚乙烯泡沫塑料

本标准规定了绝热用交联聚乙烯泡沫塑料的术语和定义、分类和标记、技术要求、试验方法、检验规则、标志、包装、运输和贮存

Cross-linked polyethylene foam for thermal insulation

S.I.634-1967 绝热用的硬泡沫聚苯乙烯

This Standard applies to products of rigid foamed polystyrene, formed by casting in moulds, or by cutting from boards, intended

RIGID FOAMED POLYSTYRENE FOR THERMAL INSULATION

HOLDEN HN 2198-2000 泡沫塑料．聚苯乙烯．PPO（聚苯醚）

Foam - Polystyrene - PPO

AS 1366.4:1989 热绝缘用硬质泡沫塑料薄板.硬质泡沫聚苯乙烯.模压(RC/PS-E)

Specifies material requirements for extruded rigid cellular polystyrene (RC/PS-E) used in sheets, boards, blocks and cut shapes for thermal

Rigid cellular plastics sheets for thermal insulation - Rigid cellular polystyrene - Extruded (RC/PS-E)

GB/T 10801.1-2002 绝热用模塑聚苯乙烯泡沫塑料

本标准规定了绝热用模塑聚苯乙烯泡沫塑料板材的分类、要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于可发性聚苯乙烯珠粒经加热预发泡后，在模具中加热成型而制得的具有闭孔结构的使用温度不超过75℃的聚苯乙烯泡沫塑料板材，也适用于大块板材切割而成的材料

Moulded polystyrene foam board for thermal insulation

GB/T 10801.2-2002 绝热用挤塑聚苯乙烯泡沫塑料(XPS)

本标准规定了绝热用挤塑聚苯乙烯泡沫塑料(XPS)的分类、规格、要求、试验方法、检验规则、标志、包装、运输、贮存。 本标准适用于使用温度不超过75℃的绝热用挤塑聚苯乙烯泡沫塑料，也适用于带有塑料、箔片贴面以及带有表面涂层的绝热用挤塑聚苯乙烯泡沫塑料

Rigid extruded polystyrene foam board for thermal insulation (XPS)

GB/T 10801.1-2021 绝热用模塑聚苯乙烯泡沫塑料(EPS)

本文件规定了绝热上用模塑聚葵乙烯泡沫塑料CEPS)的分类,要求.试验方法.检验规则和标志、包装运输、贮存。 本文件适用于可发性聚葵乙烯珠粒经加热预发泡后,在模具中加热成型而制得的具有闭孔结构的使用温度不超过75 的绝热用模塑聚茶乙烯泡沫塑料及其切割而成的制品。 本文件也适用于原料中通过添加石墨等

Moulded polystyrene foam for thermal insulation（EPS）

GB/T 10801.2-2018 绝热用挤塑聚苯乙烯泡沫塑料(XPS)

Rigid extruded polystyrene foam board for thermal insulation(XPS)

DB21/T 2840-2017 绝热用模塑聚苯乙烯泡沫塑料中固体机物的现场快速检测方法

Method for rapid on-site detection of solid inorganic matter in molded polystyrene foam for thermal insulation

DB21/T 2836-2017 渗透剂水溶液增重绝热用模塑聚苯乙烯泡沫塑料的现场快速检测方法

Method for rapid on-site testing of molded polystyrene foam for weight gain insulation with aqueous penetrant

JC/T 2441-2018 建筑绝热用石墨改性模塑聚苯乙烯泡沫塑料板

本标准规定了建筑绝热用石墨改性模塑聚苯乙烯泡沫塑料板的术语和定义、分类、代号和标记、要求、试验方法、检验规则以及标志、包装、运输和贮存。 本标准适用于建筑绝热用石墨改性模塑聚苯乙烯泡沫塑料板(以下简称石墨聚苯板

Graphite modified expanded polystyrene foam board for building thermal insulation

DIN EN 13164:2009 建筑物用绝热产品.工厂制聚苯乙烯泡沫塑料(XPS)产品.规范

This European Standard specifies the requirements for factory made products of extruded polystyrene foam, with or without facings or coatings, which

Thermal insulation products for buildings - Factory made products of extruded polystyrene foam (XPS) - Specification; English version of DIN EN 13164:2009-02

BS EN 14307:2009 建筑设备和工业设施用热绝缘产品.工厂制挤塑聚苯乙烯泡沫塑料（XPS）产品.规范

This European Standard specifies the requirements for factory made extruded polystyrene foam products which are used for the thermal insulation

Thermal insulation products for building equipment and industrial installations - Factory made extruded polystyrene foam (XPS) products - Specification

QB/T 3807-1999 隔热用聚苯乙烯泡沫塑料

Cellular plastics.Polystyrene foam for thermal insulation

STAS 7461-1984 泡沫塑料．泡沫聚苯乙烯

Prezentul standard se refer? la polistirenul celular ob?inut prin expandarea perlelor de polistiren care con?in ?nglobat? o hidrocarbura volatil

Cellular plastics CELL.ULAMR POL YSTYRENE

T/LJH 026-2023 绝热用交联聚乙烯泡沫塑料

本标准规定了绝热用交联聚乙烯泡沫塑料的术语和定义、分类和标记、技术要求、试验方法、检验规则、标志、包装、运输和贮存

Cross-linked polyethylene foam for thermal insulation

S.I.634-1967 绝热用的硬泡沫聚苯乙烯

This Standard applies to products of rigid foamed polystyrene, formed by casting in moulds, or by cutting from boards, intended

RIGID FOAMED POLYSTYRENE FOR THERMAL INSULATION

HOLDEN HN 2198-2000 泡沫塑料．聚苯乙烯．PPO（聚苯醚）

Foam - Polystyrene - PPO

AS 1366.4:1989 热绝缘用硬质泡沫塑料薄板.硬质泡沫聚苯乙烯.模压(RC/PS-E)

Specifies material requirements for extruded rigid cellular polystyrene (RC/PS-E) used in sheets, boards, blocks and cut shapes for thermal

Rigid cellular plastics sheets for thermal insulation - Rigid cellular polystyrene - Extruded (RC/PS-E)