钢丝缠绕式冷等静压机检测

JB/T 7348-1994 钢丝缠绕式冷等静压机

Wire winding cold isostatic press

JB/T 7348-2005 钢丝缠绕式冷等静压机

本标准规定了钢丝缠绕式冷等静压机(以下简称压机)的型式、参数和技术要求。 本标准适用于最高工作压力不大于300MPa的压机

Cold isostatic press wound with steel wire

JB/T 13116-2017 钢丝缠绕式热等静压机

Steel wire winding hot isostatic press

YB/T 4295-2012 承压机械设备缠绕用扁钢丝

本标准规定了承压机械设备缠绕用扁钢丝(以下简称扁钢丝)的分类与代号、截面形状及标记、订货内容、尺寸、外形及允许偏差、技术要求、试验方法、检验规则、包装、标志和质量证明书等。本标准适用于具有带轧制圆弧边的高强度冷轧扁钢丝。该扁钢丝主要用于承受压力的机械设备的缠绕,如:液压机、等静压机的机架、缸体的缠绕

Flat steel wire for winding on pressure machine

ISO/R 145:1960 钢丝缠绕试验

Wrapping test for steel wire

NC 04-16-1968 钢丝的缠绕试验

Wrapping test for steel wire

ASTM A905-04 压力容器缠绕用钢丝的标准规范

1.1 This specification covers requirements for a high strength drawn and cold rolled steel wire in two strength classes, with rectangular cross

Standard Specification for Steel Wire, Pressure Vessel Winding

ASME SEC II A SA-905-2001 压力容器缠绕用钢丝规范.ASTM A905-93

Boiler and Pressure Vessel,Specification for Steel Wire, Pressure Vessel Winding ASTM A905-93

Specification for Steel Wire, Pressure Vessel Winding ASTM A905-93

ASTM A905-04(2017 压力容器缠绕用钢丝的标准规格

1.1 This specification covers requirements for a high

Standard Specification for Steel Wire, Pressure Vessel Winding

ASTM A905-04(2010 压力容器缠绕用钢丝的标准规范

1.1 This specification covers requirements for a high strength drawn and cold rolled steel wire in two strength classes

Standard Specification for Steel Wire, Pressure Vessel Winding

JT/T 1106-2016 悬索桥主缆缠绕用S形钢丝

本标准规定了悬索桥主缆缠绕用S形钢丝的结构、规格和型号、技术要求、试验方法、检验规则，以及标志、包装、运输和储存要求。 本标准适用于悬索桥主缆缠绕用S形钢丝

S-shaped steel wrapping wire for main cable of suspension bridge

JB/T 53524-2000 单绳缠绕式矿井提升机 产品质量分等

Product quality classification of single-rope winding mine hoist

T/WZBF 003-2019 钢制阀门用缠绕式垫片

本标准规定了钢制阀门用缠绕式垫片的型式、代号、尺寸、要求、检验方法、标志、包装、贮运。本标准适用于钢制阀门的机构组件中法兰连接面和阀门与管道连接法兰端所选用的缠绕式垫片

Spiral wound gasket for steel valve

IS 1270-1965 公制钢卷尺规范（缠绕式）

This standard covers the requirements for metric steel tape measures, provided with automatic or hand-winding arrangement

Specification for metric steel tape measures (wound type)

AWWA D110 ERTM-2005 金属丝缠绕圆形钢精混凝水槽

Wire- and Strand-Wound, Circular, Prestressed Concrete Water Tanks

Wire- and Strand-Wound, Circular, Prestressed Concrete Water Tanks

JB/T 7348-1994 钢丝缠绕式冷等静压机

Wire winding cold isostatic press

JB/T 7348-2005 钢丝缠绕式冷等静压机

本标准规定了钢丝缠绕式冷等静压机(以下简称压机)的型式、参数和技术要求。 本标准适用于最高工作压力不大于300MPa的压机

Cold isostatic press wound with steel wire

JB/T 13116-2017 钢丝缠绕式热等静压机

Steel wire winding hot isostatic press

YB/T 4295-2012 承压机械设备缠绕用扁钢丝

本标准规定了承压机械设备缠绕用扁钢丝(以下简称扁钢丝)的分类与代号、截面形状及标记、订货内容、尺寸、外形及允许偏差、技术要求、试验方法、检验规则、包装、标志和质量证明书等。本标准适用于具有带轧制圆弧边的高强度冷轧扁钢丝。该扁钢丝主要用于承受压力的机械设备的缠绕,如:液压机、等静压机的机架、缸体的缠绕

Flat steel wire for winding on pressure machine

ISO/R 145:1960 钢丝缠绕试验

Wrapping test for steel wire

NC 04-16-1968 钢丝的缠绕试验

Wrapping test for steel wire

ASTM A905-04 压力容器缠绕用钢丝的标准规范

1.1 This specification covers requirements for a high strength drawn and cold rolled steel wire in two strength classes, with rectangular cross

Standard Specification for Steel Wire, Pressure Vessel Winding

ASME SEC II A SA-905-2001 压力容器缠绕用钢丝规范.ASTM A905-93

Boiler and Pressure Vessel,Specification for Steel Wire, Pressure Vessel Winding ASTM A905-93

Specification for Steel Wire, Pressure Vessel Winding ASTM A905-93

ASTM A905-04(2017 压力容器缠绕用钢丝的标准规格

1.1 This specification covers requirements for a high

Standard Specification for Steel Wire, Pressure Vessel Winding

ASTM A905-04(2010 压力容器缠绕用钢丝的标准规范

1.1 This specification covers requirements for a high strength drawn and cold rolled steel wire in two strength classes

Standard Specification for Steel Wire, Pressure Vessel Winding

JT/T 1106-2016 悬索桥主缆缠绕用S形钢丝

本标准规定了悬索桥主缆缠绕用S形钢丝的结构、规格和型号、技术要求、试验方法、检验规则，以及标志、包装、运输和储存要求。 本标准适用于悬索桥主缆缠绕用S形钢丝

S-shaped steel wrapping wire for main cable of suspension bridge

JB/T 53524-2000 单绳缠绕式矿井提升机 产品质量分等

Product quality classification of single-rope winding mine hoist

T/WZBF 003-2019 钢制阀门用缠绕式垫片

本标准规定了钢制阀门用缠绕式垫片的型式、代号、尺寸、要求、检验方法、标志、包装、贮运。本标准适用于钢制阀门的机构组件中法兰连接面和阀门与管道连接法兰端所选用的缠绕式垫片

Spiral wound gasket for steel valve

IS 1270-1965 公制钢卷尺规范（缠绕式）

This standard covers the requirements for metric steel tape measures, provided with automatic or hand-winding arrangement

Specification for metric steel tape measures (wound type)

AWWA D110 ERTM-2005 金属丝缠绕圆形钢精混凝水槽

Wire- and Strand-Wound, Circular, Prestressed Concrete Water Tanks

Wire- and Strand-Wound, Circular, Prestressed Concrete Water Tanks