JB/T 12773-2015 数控管端成型机
本标准规定了数控管端成型机的基本参数、技术要求、试验方法、检验规则、包装、运输和贮存。 本标准适用于金属管材在冷态条件下切屑加工的数控管端成型机
NC Pipe end former machine
JB/T 12088.3-2014 管端成型机 第3部分:精度
JB/T 12088的本部分规定了管端成型机的几何精度和工作精度。本部分适用于管端成型机
Pipe end former.Part 3: Testing of the accuracy
JB/T 12088.2-2014 管端成型机 第2部分:技术条件
JB/T 12088的本部分规定了管端成型机的技术要求、试验方法、检验规则、包装、运输与贮存等。本部分适用于管端成型机
Pipe end former.Part 2: Technical specification
JB/T 12088.1-2014 管端成型机 第1部分:型式与基本参数
JB/T 12088的本部分规定了管端成型机的型式与基本参数。本部分适用于管端成型机
Pipe end former.Part 1: Types and basic parameter
SAE J962-1997 用于软管连接的成型管端
This SAE Standard covers the dimensional and general specifications applicable to those formed tube end configurations suitable for hose connections
Formed Tube Ends for Hose Connections
SAE J962-1986 用于软管连接的成型管端
This SAE Standard covers the dimensional and general specifications applicable to those formed tube end configurations suitable for hose connections
Formed Tube Ends for Hose Connections
SAE J962B-1976 用于软管连接的成型管端
This SAE Standard covers the dimensional and general specifications applicable to those formed tube end configurations suitable for hose connections
FORMED TUBE ENDS FOR HOSE CONNECTIONS
SAE J1231-2004 软管连接和软管配件用成型管端
This SAE Standard provides general and dimensional specifications for formed tube ends and hose fittings. These connections are intended for general
Formed Tube Ends for Hose Connections and Hose Fittings
HG/T 2603-1994 双面胶管成型机
Double-sided hose forming machine
HG/T 2603-2011 双面胶管成型机
本标准规定了双面胶管成型机的型号与基本参数、要求、试验、检验规则、标志、包装、运输和贮存等。 本标准适用于内径为13mm～76mm的空气胶管、输水胶管和输稀酸碱胶管成型及缠水布的双面胶管成型机(以下简称成型机
Double sided hose building and wrapping machine
SAE J1231-2001 用于软管连接和软管接头的成型管端
This SAE Standard provides general and dimensional specifications for formed tube ends and hose fittings. These connections are intended for general
Formed Tube Ends for Hose Connections and Hose Fittings
JC/T 697-1998 钢筋混凝土管悬辊成型机
Roller suspension shaping machine of reinforced concrete pipe
JB/T 6330-1992 TG1型管状端头
本标准规定了TG1型管状端头的型号、规格、技术要求、试验方法、检验规则、标志、包装和运输、贮存。 本标准适用于0.5～6mm2多股圆铜绞线与接线端子连接时，在绞线端剥去绝缘层后与铜导体部分压接的管状端头
TG1 type tubular end sockets
NAVY MIL-DTL-17902 G-2013 软管、端部配件和软管组件、合成橡胶、飞机燃料
HOSE, END FITTINGS AND HOSE ASSEMBLIES, SYNTHETIC RUBBER, AIRCRAFT FUELS
GB/Z 43036-2023 旋转电机 定子成型绕组端部振动的测量
Measurement of Vibration at the Ends of Stator Formed Windings of Rotating Electric Machines
JB/T 12773-2015 数控管端成型机
本标准规定了数控管端成型机的基本参数、技术要求、试验方法、检验规则、包装、运输和贮存。 本标准适用于金属管材在冷态条件下切屑加工的数控管端成型机
NC Pipe end former machine
JB/T 12088.3-2014 管端成型机 第3部分:精度
JB/T 12088的本部分规定了管端成型机的几何精度和工作精度。本部分适用于管端成型机
Pipe end former.Part 3: Testing of the accuracy
JB/T 12088.2-2014 管端成型机 第2部分:技术条件
JB/T 12088的本部分规定了管端成型机的技术要求、试验方法、检验规则、包装、运输与贮存等。本部分适用于管端成型机
Pipe end former.Part 2: Technical specification
JB/T 12088.1-2014 管端成型机 第1部分:型式与基本参数
JB/T 12088的本部分规定了管端成型机的型式与基本参数。本部分适用于管端成型机
Pipe end former.Part 1: Types and basic parameter
SAE J962-1997 用于软管连接的成型管端
This SAE Standard covers the dimensional and general specifications applicable to those formed tube end configurations suitable for hose connections
Formed Tube Ends for Hose Connections
SAE J962-1986 用于软管连接的成型管端
This SAE Standard covers the dimensional and general specifications applicable to those formed tube end configurations suitable for hose connections
Formed Tube Ends for Hose Connections
SAE J962B-1976 用于软管连接的成型管端
This SAE Standard covers the dimensional and general specifications applicable to those formed tube end configurations suitable for hose connections
FORMED TUBE ENDS FOR HOSE CONNECTIONS
SAE J1231-2004 软管连接和软管配件用成型管端
This SAE Standard provides general and dimensional specifications for formed tube ends and hose fittings. These connections are intended for general
Formed Tube Ends for Hose Connections and Hose Fittings
HG/T 2603-1994 双面胶管成型机
Double-sided hose forming machine
HG/T 2603-2011 双面胶管成型机
本标准规定了双面胶管成型机的型号与基本参数、要求、试验、检验规则、标志、包装、运输和贮存等。 本标准适用于内径为13mm～76mm的空气胶管、输水胶管和输稀酸碱胶管成型及缠水布的双面胶管成型机(以下简称成型机
Double sided hose building and wrapping machine
SAE J1231-2001 用于软管连接和软管接头的成型管端
This SAE Standard provides general and dimensional specifications for formed tube ends and hose fittings. These connections are intended for general
Formed Tube Ends for Hose Connections and Hose Fittings
JC/T 697-1998 钢筋混凝土管悬辊成型机
Roller suspension shaping machine of reinforced concrete pipe
JB/T 6330-1992 TG1型管状端头
本标准规定了TG1型管状端头的型号、规格、技术要求、试验方法、检验规则、标志、包装和运输、贮存。 本标准适用于0.5～6mm2多股圆铜绞线与接线端子连接时，在绞线端剥去绝缘层后与铜导体部分压接的管状端头
TG1 type tubular end sockets
NAVY MIL-DTL-17902 G-2013 软管、端部配件和软管组件、合成橡胶、飞机燃料
HOSE, END FITTINGS AND HOSE ASSEMBLIES, SYNTHETIC RUBBER, AIRCRAFT FUELS
GB/Z 43036-2023 旋转电机 定子成型绕组端部振动的测量
Measurement of Vibration at the Ends of Stator Formed Windings of Rotating Electric Machines
编辑：北检院编辑部
