GB/T 21238-2007 玻璃纤维增强塑料夹砂管
本标准规定了玻璃纤维增强塑料夹砂管(以下简称FRPM管)的分类和标记、原材料、要求、试验方法、检验规则、标志、包装、运输和贮存等。 本标准适用于公称直径为100 mm～4 000mm，压力等级为0.1 MPa～2.5 MPa，环刚度等级为1 250 N／m《上标》2～10 000 N／m《上标2
Glass fiber reinforced plastics mortar pipes
CJ/T 3079-1998 玻璃纤维增强塑料夹砂管
Glass fibre reinforced plastic mortar pipe
GB/T 21238-2016 玻璃纤维增强塑料夹砂管
本标准规定了玻璃纤维增强塑料夹砂管的术语和定义，分类和标记，原材料，要求，试验方法，检验规则，标志、包装、运输、贮存、出厂证明书和技术文件。 本标准适用于公称直径为100 mm~4 000 mm，压力等级为0.1 MPa~3.2 MPa，环刚度等级为1 250 N/m2~10 000 N
Glass fiber reinforced plastics mortar pipes
T/ZZB 1751-2020 连续缠绕玻璃纤维增强塑料夹砂管
本文件规定了连续缠绕玻璃纤维增强塑料夹砂管（以下简称CWFP管）的术语和定义、分类和标记、基本要求、技术要求、试验方法、检验规则、标志、安装线、包装、运输和吊装、贮存及质量承诺。 本文件适用于公称直径为200 mm～4 000 mm， 压力等级为
Continuously wound glass fiber reinforced plastic sandwich pipes
JC/T 2538-2019 玻璃纤维增强塑料连续缠绕夹砂管
Glass fiber reinforced plastic continuous winding sand pipe
JC/T 838-1998 玻璃纤维缠绕增强热固性树酯夹砂压力管
Glass fiber winding reinforced thermosetting resin sand inclusion pressure pipe
BS EN ISO 12543-3:2011 建筑物内玻璃.夹层玻璃和夹层安全玻璃.夹层玻璃
This part of ISO 12543 specifies performance requirements for laminated glass as defined in ISO 12543-1
Glass in building. Laminated glass and laminated safety glass. Laminated glass
BS EN ISO 12543-3:2021 建筑中的玻璃 夹层玻璃和夹层安全玻璃 夹层玻璃
1 Scope This document specifies performance requirements for laminated glass as defined in ISO 12543‑1. NOTE Any defects
Glass in building. Laminated glass and laminated safety glass. Laminated glass
GOST ISO 11485-3-2016 曲面玻璃. 钢化夹层玻璃. 技术要求
Curved glass. Tempered and laminated glass. Technical requirements
TCVN 7364-3-2004 建筑玻璃.夹层玻璃和夹层安全玻璃.第3部分:夹层玻璃
Glass in building.Laminated glass and laminated safety glass.Part 3: Laminated glass
EN ISO 12543-3:2021 玻璃建筑.夹层玻璃和夹层安全玻璃.第3部分:夹层玻璃
This document specifies performance requirements for laminated glass as defined in ISO 12543-1. NOTE Any defects that are found in installed
Glass in building - Laminated glass and laminated safety glass - Part 3: Laminated glass (ISO 12543-3:2021)
ISO 12543-3:1998 建筑玻璃 夹层玻璃和夹层安全玻璃 第3部分:夹层玻璃
This Standard specifies performance requirements for laminated glass as defined in EN ISO 12543-1
Glass in building - Laminated glass and laminated safety glass - Part 3: Laminated glass
BS EN ISO 12543-2:2011 建筑物内玻璃.夹层玻璃和夹层安全玻璃.夹层安全玻璃
This part of ISO 12543 specifies performance requirements for laminated safety glass as defined in ISO 12543-1
Glass in building. Laminated glass and laminated safety glass. Laminated safety glass
EN ISO 12543-3:2011 玻璃建筑.夹层玻璃和夹层安全玻璃.第3部分:夹层玻璃
This part of ISO 12543 specifies performance requirements for laminated glass as defined in ISO 12543-1
Glass in building - Laminated glass and laminated safety glass - Part 3: Laminated glass (ISO 12543-3:2011)
DS/EN ISO 12543-3:2011 建筑玻璃 夹层玻璃和夹层安全玻璃 第3部分：夹层玻璃
This part of this European Standard specifies performance requirements for laminated glass as defined in EN ISO 12543-1
Glass in building - Laminated glass and laminated safety glass - Part 3: Laminated glass
GB/T 21238-2007 玻璃纤维增强塑料夹砂管
本标准规定了玻璃纤维增强塑料夹砂管(以下简称FRPM管)的分类和标记、原材料、要求、试验方法、检验规则、标志、包装、运输和贮存等。 本标准适用于公称直径为100 mm～4 000mm，压力等级为0.1 MPa～2.5 MPa，环刚度等级为1 250 N／m《上标》2～10 000 N／m《上标2
Glass fiber reinforced plastics mortar pipes
CJ/T 3079-1998 玻璃纤维增强塑料夹砂管
Glass fibre reinforced plastic mortar pipe
GB/T 21238-2016 玻璃纤维增强塑料夹砂管
本标准规定了玻璃纤维增强塑料夹砂管的术语和定义，分类和标记，原材料，要求，试验方法，检验规则，标志、包装、运输、贮存、出厂证明书和技术文件。 本标准适用于公称直径为100 mm~4 000 mm，压力等级为0.1 MPa~3.2 MPa，环刚度等级为1 250 N/m2~10 000 N
Glass fiber reinforced plastics mortar pipes
T/ZZB 1751-2020 连续缠绕玻璃纤维增强塑料夹砂管
本文件规定了连续缠绕玻璃纤维增强塑料夹砂管（以下简称CWFP管）的术语和定义、分类和标记、基本要求、技术要求、试验方法、检验规则、标志、安装线、包装、运输和吊装、贮存及质量承诺。 本文件适用于公称直径为200 mm～4 000 mm， 压力等级为
Continuously wound glass fiber reinforced plastic sandwich pipes
JC/T 2538-2019 玻璃纤维增强塑料连续缠绕夹砂管
Glass fiber reinforced plastic continuous winding sand pipe
JC/T 838-1998 玻璃纤维缠绕增强热固性树酯夹砂压力管
Glass fiber winding reinforced thermosetting resin sand inclusion pressure pipe
BS EN ISO 12543-3:2011 建筑物内玻璃.夹层玻璃和夹层安全玻璃.夹层玻璃
This part of ISO 12543 specifies performance requirements for laminated glass as defined in ISO 12543-1
Glass in building. Laminated glass and laminated safety glass. Laminated glass
BS EN ISO 12543-3:2021 建筑中的玻璃 夹层玻璃和夹层安全玻璃 夹层玻璃
1 Scope This document specifies performance requirements for laminated glass as defined in ISO 12543‑1. NOTE Any defects
Glass in building. Laminated glass and laminated safety glass. Laminated glass
GOST ISO 11485-3-2016 曲面玻璃. 钢化夹层玻璃. 技术要求
Curved glass. Tempered and laminated glass. Technical requirements
TCVN 7364-3-2004 建筑玻璃.夹层玻璃和夹层安全玻璃.第3部分:夹层玻璃
Glass in building.Laminated glass and laminated safety glass.Part 3: Laminated glass
EN ISO 12543-3:2021 玻璃建筑.夹层玻璃和夹层安全玻璃.第3部分:夹层玻璃
This document specifies performance requirements for laminated glass as defined in ISO 12543-1. NOTE Any defects that are found in installed
Glass in building - Laminated glass and laminated safety glass - Part 3: Laminated glass (ISO 12543-3:2021)
ISO 12543-3:1998 建筑玻璃 夹层玻璃和夹层安全玻璃 第3部分:夹层玻璃
This Standard specifies performance requirements for laminated glass as defined in EN ISO 12543-1
Glass in building - Laminated glass and laminated safety glass - Part 3: Laminated glass
BS EN ISO 12543-2:2011 建筑物内玻璃.夹层玻璃和夹层安全玻璃.夹层安全玻璃
This part of ISO 12543 specifies performance requirements for laminated safety glass as defined in ISO 12543-1
Glass in building. Laminated glass and laminated safety glass. Laminated safety glass
EN ISO 12543-3:2011 玻璃建筑.夹层玻璃和夹层安全玻璃.第3部分:夹层玻璃
This part of ISO 12543 specifies performance requirements for laminated glass as defined in ISO 12543-1
Glass in building - Laminated glass and laminated safety glass - Part 3: Laminated glass (ISO 12543-3:2011)
DS/EN ISO 12543-3:2011 建筑玻璃 夹层玻璃和夹层安全玻璃 第3部分：夹层玻璃
This part of this European Standard specifies performance requirements for laminated glass as defined in EN ISO 12543-1
Glass in building - Laminated glass and laminated safety glass - Part 3: Laminated glass
编辑：北检院编辑部
