钢丝绳（套）及防扭钢丝绳（套）检测

YB/T 4747-2019 防扭绳用钢丝绳

Wire rope for anti-twist rope

NEN 2538-1968 钢丝绳套

Deze norm geeft afmetingen en kwaliteitseisen voor staalkabelsokken

Sockets for steel wire-ropes

HB 5-9-1983 钢丝绳在套环上扭转收头

The wire rope is twisted and closed on the collar

ONORM M 9510-1984 钢丝绳．套管

Steel wire ropes; thimbles

HB 5-9-1976 钢丝绳在套环上扭转收头

The wire rope is twisted and closed on the collar

AS 1138:2008 钢丝绳用套环

Specifies requirements for thimbles that are suitable for use with Grade 1770, galvanized or ungalvanized, round strand, equal lay, 6 (36 or 6) 19

Thimbles for wire rope

YB/T 4615-2017 钢丝绳绳端 树脂套接

Steel wire rope end resin socket

HB 7387.18-1996 钢丝绳接头 钢丝绳在套环上的压紧收头

The compression end of the wire rope joint wire rope on the collar

GB/T 30589-2014 钢丝绳绳端 套管压制索具

本标准规定了套管压制的钢丝绳索具的术语和定义、设计加工文件、原材料、套管压制、型式检验、产品出厂检验、标志和质量证明书等。本标准适用于公称直径不大于150 mm,钢丝绳强度级别不大于1 960 MPa的套管压制索具

Steel wire rope terminations.Ferrule-securing sling

DLA MS51844 REV D-2007 旋锻-钢丝绳套筒

This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product

SLEEVE, SWAGING-WIRE ROPE

DLA MS51844 REV E-2011 套筒，锻造钢丝绳

SLEEVE, SWAGING-WIRE ROPE

IS 2315-1978 钢丝绳套管规范

Lays down the requirements for ordinary, reeving, solid and open types thimbles for wire ropes

Specification for wire rope casing

GB/T 30588-2014 钢丝绳绳端 合金熔铸套接

本标准规定「钢丝绳绳端合金熔铸套接(以下简称浇铸吊索〉的产品分类、要求、试验方法、标志、包装、运输和贮存。 本标准适用于钢丝绳直径不小于5 mm 的吊装或牵引用合金熔铸吊索

Terminations for steel wire ropes.Molten metal socketing

GB/T 5974.2-2006 钢丝绳用重型套环

本标准规定了钢丝绳用重型套环的型式和尺寸、技术要求、试验方法、检验规则、标志、包装、运输和储存。 本标准适用于GB 8918-2006、GB/T 20118-2006中规定的圆股钢丝绳用重型套环（以下简称套环

Heavy thimbles for use with steel wire ropes

GB/T 5974.1-2006 钢丝绳用普通套环

本标准规定了钢丝绳用普通套环的型式和尺寸、技术要求、试验方法、检验规则、标志、包装、运输和储存。 本标准适用于GB 8918-2006、GB/T 20118-2006规定的圆股钢丝绳用普通套环（以下简称套环

General purpose thimbles for use with steel wire ropes

YB/T 4747-2019 防扭绳用钢丝绳

Wire rope for anti-twist rope

NEN 2538-1968 钢丝绳套

Deze norm geeft afmetingen en kwaliteitseisen voor staalkabelsokken

Sockets for steel wire-ropes

HB 5-9-1983 钢丝绳在套环上扭转收头

The wire rope is twisted and closed on the collar

ONORM M 9510-1984 钢丝绳．套管

Steel wire ropes; thimbles

HB 5-9-1976 钢丝绳在套环上扭转收头

The wire rope is twisted and closed on the collar

AS 1138:2008 钢丝绳用套环

Specifies requirements for thimbles that are suitable for use with Grade 1770, galvanized or ungalvanized, round strand, equal lay, 6 (36 or 6) 19

Thimbles for wire rope

YB/T 4615-2017 钢丝绳绳端 树脂套接

Steel wire rope end resin socket

HB 7387.18-1996 钢丝绳接头 钢丝绳在套环上的压紧收头

The compression end of the wire rope joint wire rope on the collar

GB/T 30589-2014 钢丝绳绳端 套管压制索具

本标准规定了套管压制的钢丝绳索具的术语和定义、设计加工文件、原材料、套管压制、型式检验、产品出厂检验、标志和质量证明书等。本标准适用于公称直径不大于150 mm,钢丝绳强度级别不大于1 960 MPa的套管压制索具

Steel wire rope terminations.Ferrule-securing sling

DLA MS51844 REV D-2007 旋锻-钢丝绳套筒

This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product

SLEEVE, SWAGING-WIRE ROPE

DLA MS51844 REV E-2011 套筒，锻造钢丝绳

SLEEVE, SWAGING-WIRE ROPE

IS 2315-1978 钢丝绳套管规范

Lays down the requirements for ordinary, reeving, solid and open types thimbles for wire ropes

Specification for wire rope casing

GB/T 30588-2014 钢丝绳绳端 合金熔铸套接

本标准规定「钢丝绳绳端合金熔铸套接(以下简称浇铸吊索〉的产品分类、要求、试验方法、标志、包装、运输和贮存。 本标准适用于钢丝绳直径不小于5 mm 的吊装或牵引用合金熔铸吊索

Terminations for steel wire ropes.Molten metal socketing

GB/T 5974.2-2006 钢丝绳用重型套环

本标准规定了钢丝绳用重型套环的型式和尺寸、技术要求、试验方法、检验规则、标志、包装、运输和储存。 本标准适用于GB 8918-2006、GB/T 20118-2006中规定的圆股钢丝绳用重型套环（以下简称套环

Heavy thimbles for use with steel wire ropes

GB/T 5974.1-2006 钢丝绳用普通套环

本标准规定了钢丝绳用普通套环的型式和尺寸、技术要求、试验方法、检验规则、标志、包装、运输和储存。 本标准适用于GB 8918-2006、GB/T 20118-2006规定的圆股钢丝绳用普通套环（以下简称套环

General purpose thimbles for use with steel wire ropes