汽车油罐车油气回收检测

T/JMTX 019-2022 油品运输汽车罐车油气回收系统密闭性限值检测规程

4　检测要求 油品运输汽车罐车清洗干净，罐体内不能存有残油。应停靠在一个不受阳光直接照射的位置接受检测。 5　检测设备要求 氮气加压系统。氮气加压系统能向罐体内加压至7kPa。 低压调节器。低压调节器用于控制高压气源压力，分度值≤20 kPa。 压力表。压力表测量范围（-6～6

Inspection regulations for airtightness limit value of tank car oil gas recovery system for oil transport vehicles

T/ZJASE 022-2023 油品运输工具（汽车罐车）油气回收系统检测规则及方法

规定了油品运输工具（汽车罐车）油气回收系统检测的基本要求、程序、检测规则、结果不符合的处理以及记录和报告的要求

Rules and Methods for Vapor Recovery System Testing of Petroleum Transportation Facility (truck tank)

T/ZZB 2462-2021 汽油汽车燃油蒸气炭罐

本文件规定了汽油汽车燃油蒸气炭罐的基本要求、燃料和气体、技术要求、试验方法、检验规则、标识、包装、运输、贮存和质量承诺。 本文件适用于汽油汽车用燃油蒸气炭罐（以下简称“炭罐

Carbon canister for gasoline vehicle fuel vapor 2021

JJG 133-2005 汽车油罐车容量

本规程适用于装运轻质燃油汽车罐车容量值的首次检定和后续检定。对于装载其他在测量温度下粘度不超过17mPa·s液体的汽车罐车可按此规程执行

Tank Cars Capacity

BS EN 16321-2:2013 汽车在加油站加油期间汽油蒸气回收. 加油站蒸气回收系统检定的试验方法

Petrol vapour recovery during refuelling of motor vehicles at service stations. Test methods for verification of vapour recovery systems at service stations

AQ 3001-2005 汽车加油(气)站、轻质燃油和液化石油气汽车罐车用阻隔防爆储罐技术要求

本标准规定了采用阻隔防爆技术的汽车加油(气)站和汽车运输用轻质燃油、液化石油气阻隔防爆储罐(罐体)的分类和标记、要求、检测方法、检验规则和技术文件。 本标准适用于汽车加油(气)站、轻质燃油、液化石油气汽车罐车用阻隔防爆储罐(以下简称储罐)的设计、制造、安装和验收

Technology-Separate and explosion-proof of gasoline, gas filling station and light-fuel, LPG tank of transportation by truck

QC/T 1063-2017 道路运输轻质燃油罐式车辆 油气回收组件

Oil and gas recovery components for road transport lightweight fuel tank vehicles

JJG 133-2016 汽车油罐车容量

本规程适用于汽车油罐车(装运轻质燃油汽车罐车)容量的首次检定和后续检定

Road Tankers Capacity

BS EN 16321-1:2013 汽车在加油站加油期间汽油蒸气回收.汽油蒸气回收系统的型式认证效率评估的试验方法

Petrol vapour recovery during refuelling of motor vehicles at service stations. Test methods for the type approval efficiency assessment of petrol vapour recovery systems

DB11/ 207-2023 油罐车油气排放控制和限值

Oil and gas emission controls and limits from tank trucks

API RP 1006-1974 油罐车装卸铅汽油

This Recommended Practice identifies and classifies the various types of tank which will be used in the highway transportation of unleaded gasoline

THE LOADING AND UNLOADING OF UNLEADED GASOLINE BY TANK MOTOR VEHICLES

KS R 9242-2005(2015 高压气罐汽车油箱安全阀

Safety valves for high pressure gas tank car tanks

EN 16321-1:2013 汽车在加油站加油期间汽油蒸气回收.第1部分:汽油蒸气回收系统的型式认证效率评估的试验方法

This European Standard specifies the measurement and test methods for the efficiency assessment of petrol vapour recovery systems for service stations

Petrol vapour recovery during refuelling of motor vehicles at service stations - Part 1: Test methods for the type approval efficiency assessment of petrol vapour recovery systems

DIN ISO 13331:1996 道路车辆.摩托车油箱开口和注油管.蒸汽回收系统

The interface between nozzle spouts and motor vehicle for vapour recovery is defined in this document

Road vehicles - Filler pipes and openings of motor vehicle fuel tanks - Vapour recovery system (ISO 13331:1995)

NFPA (Fire) FL71VH 汽油油罐车紧急情况视频

Gasoline Tank Truck Emergencies Video

T/JMTX 019-2022 油品运输汽车罐车油气回收系统密闭性限值检测规程

4　检测要求 油品运输汽车罐车清洗干净，罐体内不能存有残油。应停靠在一个不受阳光直接照射的位置接受检测。 5　检测设备要求 氮气加压系统。氮气加压系统能向罐体内加压至7kPa。 低压调节器。低压调节器用于控制高压气源压力，分度值≤20 kPa。 压力表。压力表测量范围（-6～6

Inspection regulations for airtightness limit value of tank car oil gas recovery system for oil transport vehicles

T/ZJASE 022-2023 油品运输工具（汽车罐车）油气回收系统检测规则及方法

规定了油品运输工具（汽车罐车）油气回收系统检测的基本要求、程序、检测规则、结果不符合的处理以及记录和报告的要求

Rules and Methods for Vapor Recovery System Testing of Petroleum Transportation Facility (truck tank)

T/ZZB 2462-2021 汽油汽车燃油蒸气炭罐

本文件规定了汽油汽车燃油蒸气炭罐的基本要求、燃料和气体、技术要求、试验方法、检验规则、标识、包装、运输、贮存和质量承诺。 本文件适用于汽油汽车用燃油蒸气炭罐（以下简称“炭罐

Carbon canister for gasoline vehicle fuel vapor 2021

JJG 133-2005 汽车油罐车容量

本规程适用于装运轻质燃油汽车罐车容量值的首次检定和后续检定。对于装载其他在测量温度下粘度不超过17mPa·s液体的汽车罐车可按此规程执行

Tank Cars Capacity

BS EN 16321-2:2013 汽车在加油站加油期间汽油蒸气回收. 加油站蒸气回收系统检定的试验方法

Petrol vapour recovery during refuelling of motor vehicles at service stations. Test methods for verification of vapour recovery systems at service stations

AQ 3001-2005 汽车加油(气)站、轻质燃油和液化石油气汽车罐车用阻隔防爆储罐技术要求

本标准规定了采用阻隔防爆技术的汽车加油(气)站和汽车运输用轻质燃油、液化石油气阻隔防爆储罐(罐体)的分类和标记、要求、检测方法、检验规则和技术文件。 本标准适用于汽车加油(气)站、轻质燃油、液化石油气汽车罐车用阻隔防爆储罐(以下简称储罐)的设计、制造、安装和验收

Technology-Separate and explosion-proof of gasoline, gas filling station and light-fuel, LPG tank of transportation by truck

QC/T 1063-2017 道路运输轻质燃油罐式车辆 油气回收组件

Oil and gas recovery components for road transport lightweight fuel tank vehicles

JJG 133-2016 汽车油罐车容量

本规程适用于汽车油罐车(装运轻质燃油汽车罐车)容量的首次检定和后续检定

Road Tankers Capacity

BS EN 16321-1:2013 汽车在加油站加油期间汽油蒸气回收.汽油蒸气回收系统的型式认证效率评估的试验方法

Petrol vapour recovery during refuelling of motor vehicles at service stations. Test methods for the type approval efficiency assessment of petrol vapour recovery systems

DB11/ 207-2023 油罐车油气排放控制和限值

Oil and gas emission controls and limits from tank trucks

API RP 1006-1974 油罐车装卸铅汽油

This Recommended Practice identifies and classifies the various types of tank which will be used in the highway transportation of unleaded gasoline

THE LOADING AND UNLOADING OF UNLEADED GASOLINE BY TANK MOTOR VEHICLES

KS R 9242-2005(2015 高压气罐汽车油箱安全阀

Safety valves for high pressure gas tank car tanks

EN 16321-1:2013 汽车在加油站加油期间汽油蒸气回收.第1部分:汽油蒸气回收系统的型式认证效率评估的试验方法

This European Standard specifies the measurement and test methods for the efficiency assessment of petrol vapour recovery systems for service stations

Petrol vapour recovery during refuelling of motor vehicles at service stations - Part 1: Test methods for the type approval efficiency assessment of petrol vapour recovery systems

DIN ISO 13331:1996 道路车辆.摩托车油箱开口和注油管.蒸汽回收系统

The interface between nozzle spouts and motor vehicle for vapour recovery is defined in this document

Road vehicles - Filler pipes and openings of motor vehicle fuel tanks - Vapour recovery system (ISO 13331:1995)

NFPA (Fire) FL71VH 汽油油罐车紧急情况视频

Gasoline Tank Truck Emergencies Video