服务热线:400-635-0567

铜精矿、铅精矿、锌精矿检测

发布时间:2024-05-27 17:49:26 - 更新时间:2024年06月29日 15:22

点击量:0

工业诊断 动物实验 植物学检测 环境试验

ISO/CD 12744:2023 、镍

Copper, lead, zinc and nickel concentrates

AS ISO 11794:2022 和镍 浆取样

AS ISO 11794:2022 identically adopts ISO 11794:2017, which sets out the basic methods for sampling particulate material that is mixed with a liquid

Copper, lead, zinc and nickel concentrates — Sampling of slurries

ISO/CD TR 15855:2023 硫化物

Copper, lead and zinc sulfide concentrates

YS/T 452-2002 混合

本标准规定了混合铅锌精矿的要求.试验方法、检验规则及包装、运输。 本标准适用于硫化型矿经泽选而制得的混合铅锌精矿 ,也可适用其他方法选得的混合铅锌精矿

Lead & zinc bulk concentrate

YS/T 452-2013 混合

本标准规定了混合铅锌精矿的要求、试验方法、检验规则、包装和运输及合同(或订货单)内容。本标准适用于硫化矿经浮选所得的混合铅锌精矿,也适用于其他方法选得的混合铅锌精矿

Lead and zinc bulk concentrate

JUS B.G8.400-1984 石及

Ores and concentrates. Lead concentrate

AS 2863:2008 和镍.散装干燥失量的测定

Adopts ISO 10251:2006 to provide procedures for the determination of mass loss of bulk material on drying

Copper, lead, zinc and nickel concentrates - Determination of mass loss of bulk material on drying

GB/T 30083-2013 计量方法的密度和偏差

本标准规定了各种计量方法的偏差、精密度和某一计量方法所得质量的精密度的计算方法。本标准是以通过数据统计确认计量方法偏差,计算方差衡量其精密度并且考查在其工作范围内计量的线性程度为基础的。根据适用条款采用的校准方法和性能检测结果可以用来定量计量方法的精密度和偏差并确定计量装置的线性。本标准用于计算

Copper, lead and zinc ores and concentrates.Precision and bias of mass measurement techniques

ISO 12745:2008 .质量测量技术的度和偏差

Copper, lead and zinc ores and concentrates - Precision and bias of mass measurement techniques

BS ISO 12745:2008 .质量测量技术的度和偏差

Copper, lead and zinc ores and concentrates - Precision and bias of mass measurement techniques

AS ISO 12745:2016 石及 质量测量技术的度和偏差

Adopts ISO 12745:2008 to provide guidelines to test for bias over a wide range of mass measurement techniques, to estimate the precision for each

Copper, lead and zinc ores and concentrates — Precision and bias of mass measurement techniques

KS E ISO 12745-2018(2023 石和.质量测量技术的度和偏差

Copper, lead and zinc ores and concentrates — Precision and bias of mass measurement techniques

T/CGA 003-2017 氰化

本标准规定了氰化铅锌金精矿的要求、检验方法、检验规则及标志、包装、运输、贮存、质量证明书和订购合同。 本标准适用于氰渣经浮选获得的铅锌金精矿,供炼铅捕金用

Lead-zinc-gold concentrate produced from cyanidation process

GOST 15934.2-1980 .、镉含量测定法

Copper concentrates. Methods for determination of lead, zinc and cadmium

YS/T 319-2007

本标准规定了铅精矿的技术要求、试验方法、检验规则、包装和运输。 本标准适用于硫化矿石经浮选所得的铅精矿,供炼铅用

Lead concentrate

ISO/CD 12744:2023 、镍

Copper, lead, zinc and nickel concentrates

AS ISO 11794:2022 和镍 浆取样

AS ISO 11794:2022 identically adopts ISO 11794:2017, which sets out the basic methods for sampling particulate material that is mixed with a liquid

Copper, lead, zinc and nickel concentrates — Sampling of slurries

ISO/CD TR 15855:2023 硫化物

Copper, lead and zinc sulfide concentrates

YS/T 452-2002 混合

本标准规定了混合铅锌精矿的要求.试验方法、检验规则及包装、运输。 本标准适用于硫化型矿经泽选而制得的混合铅锌精矿 ,也可适用其他方法选得的混合铅锌精矿

Lead & zinc bulk concentrate

YS/T 452-2013 混合

本标准规定了混合铅锌精矿的要求、试验方法、检验规则、包装和运输及合同(或订货单)内容。本标准适用于硫化矿经浮选所得的混合铅锌精矿,也适用于其他方法选得的混合铅锌精矿

Lead and zinc bulk concentrate

JUS B.G8.400-1984 石及

Ores and concentrates. Lead concentrate

AS 2863:2008 和镍.散装干燥失量的测定

Adopts ISO 10251:2006 to provide procedures for the determination of mass loss of bulk material on drying

Copper, lead, zinc and nickel concentrates - Determination of mass loss of bulk material on drying

GB/T 30083-2013 计量方法的密度和偏差

本标准规定了各种计量方法的偏差、精密度和某一计量方法所得质量的精密度的计算方法。本标准是以通过数据统计确认计量方法偏差,计算方差衡量其精密度并且考查在其工作范围内计量的线性程度为基础的。根据适用条款采用的校准方法和性能检测结果可以用来定量计量方法的精密度和偏差并确定计量装置的线性。本标准用于计算

Copper, lead and zinc ores and concentrates.Precision and bias of mass measurement techniques

ISO 12745:2008 .质量测量技术的度和偏差

Copper, lead and zinc ores and concentrates - Precision and bias of mass measurement techniques

BS ISO 12745:2008 .质量测量技术的度和偏差

Copper, lead and zinc ores and concentrates - Precision and bias of mass measurement techniques

AS ISO 12745:2016 石及 质量测量技术的度和偏差

Adopts ISO 12745:2008 to provide guidelines to test for bias over a wide range of mass measurement techniques, to estimate the precision for each

Copper, lead and zinc ores and concentrates — Precision and bias of mass measurement techniques

KS E ISO 12745-2018(2023 石和.质量测量技术的度和偏差

Copper, lead and zinc ores and concentrates — Precision and bias of mass measurement techniques

T/CGA 003-2017 氰化

本标准规定了氰化铅锌金精矿的要求、检验方法、检验规则及标志、包装、运输、贮存、质量证明书和订购合同。 本标准适用于氰渣经浮选获得的铅锌金精矿,供炼铅捕金用

Lead-zinc-gold concentrate produced from cyanidation process

GOST 15934.2-1980 .、镉含量测定法

Copper concentrates. Methods for determination of lead, zinc and cadmium

YS/T 319-2007

本标准规定了铅精矿的技术要求、试验方法、检验规则、包装和运输。 本标准适用于硫化矿石经浮选所得的铅精矿,供炼铅用

Lead concentrate

检测流程
填写并提交定制服务需求表
技术评估和方案讨论
对选定的试验方法进行报价
合同签定与付款
按期交付检测报告和相关数据
想了解更多检测项目
请点击咨询在线工程师
点击咨询
联系我们
服务热线:400-635-0567
地址:北京市丰台区航丰路8号院1号楼1层121
邮编:10000
总机:400-635-0567
联系我们

服务热线:400-635-0567

投诉建议:010-82491398

报告问题解答:010-8646-0567-8

周期、价格等

咨询

技术咨询