硫化铜、铅、锌精矿检测

KS E ISO 12742-2012(2017 硫化铜铅锌精矿可运输水分限值的测定流动表法

Copper, lead and zinc sulfide concentrates－Determination of transportable moisture limits－Flow-table method

AS ISO 10378:2022 硫化铜、铅、锌精矿 金、银的测定 火试金重量法和火焰原子吸收光谱法

AS ISO 10378:2022 identically adopts ISO 10378:2016, which specifies a fire assay gravimetric and flame atomic absorption spectrometric method

Copper, lead and zinc sulfide concentrates — Determination of gold and silver — Fire assay gravimetric and flame atomic absorption spectrometric method

ISO 19976-2:2019 硫化铜铅锌精矿中镉的测定第2部分:酸溶-电感耦合等离子体原子发射光谱法

This document specifies an acid digestion and inductively coupled plasma atomic emission spectrometric (ICP-AES) method for the determination

Copper, lead and zinc sulfide concentrates — Determination of cadmium — Part 2: Acid digestion and inductively coupled plasma atomic emission spectrometric method

GB/T 27674-2011 硫化铜、铅和锌精矿 试样中湿存水分的测定 重量法

本标准规定了重量法测定硫化铜、铅和锌精矿中湿存水分。 本标准适用于不含有挥发性有机浮选药剂（如煤油）的硫化铜、铅和锌精矿样品中水分的测定，测定范围为0.05%～2%（质量分数），其结果用于湿存试样组分分析结果的校正。 本标准不适用于易氧化的硫化精矿（参见6.3注），易氧化的硫化精矿湿存水分测定

Copper,lead and zinc sulfide concentrates.Determination of hygroscopic moisture in the analysis sample.Gravimetric method

ISO 13543:1996 硫化铜、铅和锌精矿 批量测定所含金属的质量

This International Standard specifies the method for determining the mass of contained metal in a lot, based on the wet mass, moisture content and dry

Copper, lead and zinc sulfide concentrates - Determination of mass of contained metal in a lot

ISO 13292:1997 硫化铜、铅和锌精矿 检查取样偏差的试验方法

This International Standard specifies methods for checking whether there is any bias in the sampling of copper, lead, zinc and nickel concentrates

Copper, lead and zinc sulfide concentrates - Experimental methods for checking the bias of sampling

BS ISO 12744:2006 硫化铜、铅和锌精矿.取样精确性检验的试验方法

This International Standard specifies methods for checking the precision of primary sampling, sample processing, chemical analysis, physical testing

Copper, lead, zinc and nickel concentrates - Experimental methods for checking the precision of sampling

ISO 12744:1997 硫化铜、铅和锌精矿 取样精确性检验的试验方法

This International Standard specifies methods for checking the precision of primary sampling, sample processing, chemical analysis, physical testing

Copper, lead and zinc sulfide concentrates - Experimental methods for checking the precision of sampling

GB/T 30082-2013 硫化铜、硫化铅和硫化锌精矿 批料中金属质量的测定

本标准规定了根据批的湿量、含水量和干基金属含量确定批料中金属质量的计算方法,并规定了估算金属质量方差和置信区间的程序

Copper,lead and zinc sulfide concentrates.Determination of mass of contained metal in a lot

ISO 12743:1998 硫化铜、铅和锌精矿 金属和湿度含量测定的取样程序

This International Standard sets out the basic methods for sampling copper, lead and zinc concentrates from moving streams and stationary lots

Copper, lead and zinc sulfide concentrates - Sampling procedures for determination of metal and moisture content

ISO 9599:1991 硫化铜、铅和锌精矿 在分析样品中湿存水的测定 重量法

The method given is applicable to copper, lead and zinc sulfide concentrates free from volatile organic flotation reagents, e.g. kerosene

Copper, lead and zinc sulfide concentrates; determination of hygroscopic moisture in the analysis sample; gravimetric method

ISO 12742:2000 硫化铜、铅和锌精矿 传送过程中湿度范围的测定 流度台法

This International Standard specifies a flow table method for the determination of the transportable moisture limit (TML) of copper, lead and zinc

Copper, lead and zinc sulfide concentrates - Determination of transportable moisture limits - Flow table method

ISO 10251:1997 硫化铜、铅和锌精矿 散装物料干燥过程中质量损失的测定

This International Standard specifies methods for the determination of moisture content of a lot of copper, lead or zinc sulfide concentrate, defined

Copper, lead and zinc sulfide concentrates - Determination of mass loss of bulk material on drying

ISO/CD TR 15855:2023 铜、铅、锌硫化物精矿

Copper, lead and zinc sulfide concentrates

GB/T 27673-2011 硫化铜、铅、锌和镍精矿 散装干物料质量损失的测定

本标准规定了硫化铜、铅、锌和镍精矿散装干物料质量损失的测定方法,在本标准规定的干燥条件下,质量损失被定义为水分质量损失的百分比。 注:为了使精矿中金属含量的测定不产生误差,注意采用相同的干燥条件对散装物料和吸湿水分的测定或制备预Fite

Copper,lead,zinc and nickel concentrates.Determination of mass loss of bulk material on drying

KS E ISO 12742-2012(2017 硫化铜铅锌精矿可运输水分限值的测定流动表法

Copper, lead and zinc sulfide concentrates－Determination of transportable moisture limits－Flow-table method

AS ISO 10378:2022 硫化铜、铅、锌精矿 金、银的测定 火试金重量法和火焰原子吸收光谱法

AS ISO 10378:2022 identically adopts ISO 10378:2016, which specifies a fire assay gravimetric and flame atomic absorption spectrometric method

Copper, lead and zinc sulfide concentrates — Determination of gold and silver — Fire assay gravimetric and flame atomic absorption spectrometric method

ISO 19976-2:2019 硫化铜铅锌精矿中镉的测定第2部分:酸溶-电感耦合等离子体原子发射光谱法

This document specifies an acid digestion and inductively coupled plasma atomic emission spectrometric (ICP-AES) method for the determination

Copper, lead and zinc sulfide concentrates — Determination of cadmium — Part 2: Acid digestion and inductively coupled plasma atomic emission spectrometric method

GB/T 27674-2011 硫化铜、铅和锌精矿 试样中湿存水分的测定 重量法

本标准规定了重量法测定硫化铜、铅和锌精矿中湿存水分。 本标准适用于不含有挥发性有机浮选药剂（如煤油）的硫化铜、铅和锌精矿样品中水分的测定，测定范围为0.05%～2%（质量分数），其结果用于湿存试样组分分析结果的校正。 本标准不适用于易氧化的硫化精矿（参见6.3注），易氧化的硫化精矿湿存水分测定

Copper,lead and zinc sulfide concentrates.Determination of hygroscopic moisture in the analysis sample.Gravimetric method

ISO 13543:1996 硫化铜、铅和锌精矿 批量测定所含金属的质量

This International Standard specifies the method for determining the mass of contained metal in a lot, based on the wet mass, moisture content and dry

Copper, lead and zinc sulfide concentrates - Determination of mass of contained metal in a lot

ISO 13292:1997 硫化铜、铅和锌精矿 检查取样偏差的试验方法

This International Standard specifies methods for checking whether there is any bias in the sampling of copper, lead, zinc and nickel concentrates

Copper, lead and zinc sulfide concentrates - Experimental methods for checking the bias of sampling

BS ISO 12744:2006 硫化铜、铅和锌精矿.取样精确性检验的试验方法

This International Standard specifies methods for checking the precision of primary sampling, sample processing, chemical analysis, physical testing

Copper, lead, zinc and nickel concentrates - Experimental methods for checking the precision of sampling

ISO 12744:1997 硫化铜、铅和锌精矿 取样精确性检验的试验方法

This International Standard specifies methods for checking the precision of primary sampling, sample processing, chemical analysis, physical testing

Copper, lead and zinc sulfide concentrates - Experimental methods for checking the precision of sampling

GB/T 30082-2013 硫化铜、硫化铅和硫化锌精矿 批料中金属质量的测定

本标准规定了根据批的湿量、含水量和干基金属含量确定批料中金属质量的计算方法,并规定了估算金属质量方差和置信区间的程序

Copper,lead and zinc sulfide concentrates.Determination of mass of contained metal in a lot

ISO 12743:1998 硫化铜、铅和锌精矿 金属和湿度含量测定的取样程序

This International Standard sets out the basic methods for sampling copper, lead and zinc concentrates from moving streams and stationary lots

Copper, lead and zinc sulfide concentrates - Sampling procedures for determination of metal and moisture content

ISO 9599:1991 硫化铜、铅和锌精矿 在分析样品中湿存水的测定 重量法

The method given is applicable to copper, lead and zinc sulfide concentrates free from volatile organic flotation reagents, e.g. kerosene

Copper, lead and zinc sulfide concentrates; determination of hygroscopic moisture in the analysis sample; gravimetric method

ISO 12742:2000 硫化铜、铅和锌精矿 传送过程中湿度范围的测定 流度台法

This International Standard specifies a flow table method for the determination of the transportable moisture limit (TML) of copper, lead and zinc

Copper, lead and zinc sulfide concentrates - Determination of transportable moisture limits - Flow table method

ISO 10251:1997 硫化铜、铅和锌精矿 散装物料干燥过程中质量损失的测定

This International Standard specifies methods for the determination of moisture content of a lot of copper, lead or zinc sulfide concentrate, defined

Copper, lead and zinc sulfide concentrates - Determination of mass loss of bulk material on drying

ISO/CD TR 15855:2023 铜、铅、锌硫化物精矿

Copper, lead and zinc sulfide concentrates

GB/T 27673-2011 硫化铜、铅、锌和镍精矿 散装干物料质量损失的测定

本标准规定了硫化铜、铅、锌和镍精矿散装干物料质量损失的测定方法,在本标准规定的干燥条件下,质量损失被定义为水分质量损失的百分比。 注:为了使精矿中金属含量的测定不产生误差,注意采用相同的干燥条件对散装物料和吸湿水分的测定或制备预Fite

Copper,lead,zinc and nickel concentrates.Determination of mass loss of bulk material on drying