QX/T 323-2016 气象低速风洞技术条件
Meteorological low-speed wind tunnel technical conditions
QX/T 84-2007 气象低速风洞性能测试规范
本标准规定了气象低速风洞(以下简称风洞)技术性能的术语定义、测试方法、测试规则等内容。 本标准适用于上限流速为30m/s的新制造、使用中及改造后的气象用回流式和直流式低速风洞技术性能测试。上限流速的30m/s以上的气象风洞性能测试亦可参考本标准
Test specification for meteorological low speed wind tunnel performance
GJB 1179A-2012 低速风洞和高速风洞流场品质要求
本标准规定了低速风洞和高速风洞流场品质指标、流场校测的内容和方法。 本标准适用于以航空、航天飞行器试验为主要任务的低速风洞和高速风洞
Requirement for flow quality of low and high speed wind tunnels
GJB 1179-1991 高速风洞和低速风洞流场品质规范
High-speed wind tunnel and low-speed wind tunnel flow field quality specifications
GJB 1061-1991 高速风洞和低速风洞测力实验精度指标
Accuracy index of high-speed wind tunnel and low-speed wind tunnel force measurement experiments
GJB 8216-2014 飞行器进气道低速风洞试验方法
本标准规定了在低速风洞中进行飞行器进气道试验的试验内容、基本方法和数据处理。本标准适用于低速风洞中进行的飞行器进气道试验
Test method for aircraft inlet in low speed wind tunnels
BS ISO 17713-1:2007 气象学.风速测量计.测定旋转式风速计性能的风洞试验方法
This part of ISO 17713 describes wind tunnel test methods for determining performance characteristics of rotating anemometers, specifically cup
Meteorology. Wind measurements. Wind tunnel test methods for rotating anemometer performance
JJG 02-1997 矿用低速风洞检定规程
Mining low-speed wind tunnel verification regulations
GJB 6757-2009 运载火箭低速风洞试验方法
本标准规定了在低速风洞中进行运载火箭测力及地面风载荷试验的方法。 本标准适用于在低速风洞中进行运载火箭测力及地面风载荷试验
Test method of launch vehicle in low speed wind tunnel
HB 8582-2020 翼型气动性能低速风洞测压试验要求
Requirements of pressure measuring test for airfoil aerodynamic performance in the low speed wind tunnel
KS I ISO 17713-1:2009 气象学.风速测量计.第1部分:测定旋转式风速计性能的风洞试验方法
이 표준은 회전풍속계, 특히 컵풍속계와 프로펠러풍속계의 성능 특성을 확인하기 위한 풍동 시
Meteorology-Wind measurements-Part 1:Wind tunnel test methods for rotating anemometer performance
ISO 17713-1:2007 气象学.风速测量计.第1部分:测定旋转式风速计性能的风洞试验方法
1.1 This part of ISO 17713 describes wind tunnel test methods for determining performance characteristics of rotating anemometers, specifically cup
Meteorology - Wind measurements - Part 1: Wind tunnel test methods for rotating anemometer performance
DIN ISO 17713-1:2007 气象学.风力测量.第1部分:旋转风速计性能的风洞试验方法
This part of ISO 17713 describes wind tunnel test methods for determining performance characteristics of totating anemometers,specifically cup
Meteorology - Wind measurements - Part 1: Wind tunnel test methods for rotating anemometer performance (ISO 17713-1:2007) English version of DIN ISO 17713-1:2007-10
GJB 6611-2008 直升机旋翼低速风洞试验方法
本标准规定了在低速风洞中进行直升机常规旋翼模型试验的基本方法。 本标准适用于在低速风洞中进行的直升机旋翼模型试验。在其它试验场所进行的旋翼模型试验,可参考使用本标准
Test method of helicopter rotor model in low speed wind tunnel
GJB 180A-2006 低速风洞飞机模型设计准则
本标准规定了低速风洞飞机模型的设计要求以及制造、检验的精度要求。 本标准适用于我国3m量级低速风洞飞机模型的设计。其它量级低速风洞的飞机模型和其它类型的试验模型可参考使用
Design criteria of aircraft test model in low speed wind tunnel
QX/T 323-2016 气象低速风洞技术条件
Meteorological low-speed wind tunnel technical conditions
QX/T 84-2007 气象低速风洞性能测试规范
本标准规定了气象低速风洞(以下简称风洞)技术性能的术语定义、测试方法、测试规则等内容。 本标准适用于上限流速为30m/s的新制造、使用中及改造后的气象用回流式和直流式低速风洞技术性能测试。上限流速的30m/s以上的气象风洞性能测试亦可参考本标准
Test specification for meteorological low speed wind tunnel performance
GJB 1179A-2012 低速风洞和高速风洞流场品质要求
本标准规定了低速风洞和高速风洞流场品质指标、流场校测的内容和方法。 本标准适用于以航空、航天飞行器试验为主要任务的低速风洞和高速风洞
Requirement for flow quality of low and high speed wind tunnels
GJB 1179-1991 高速风洞和低速风洞流场品质规范
High-speed wind tunnel and low-speed wind tunnel flow field quality specifications
GJB 1061-1991 高速风洞和低速风洞测力实验精度指标
Accuracy index of high-speed wind tunnel and low-speed wind tunnel force measurement experiments
GJB 8216-2014 飞行器进气道低速风洞试验方法
本标准规定了在低速风洞中进行飞行器进气道试验的试验内容、基本方法和数据处理。本标准适用于低速风洞中进行的飞行器进气道试验
Test method for aircraft inlet in low speed wind tunnels
BS ISO 17713-1:2007 气象学.风速测量计.测定旋转式风速计性能的风洞试验方法
This part of ISO 17713 describes wind tunnel test methods for determining performance characteristics of rotating anemometers, specifically cup
Meteorology. Wind measurements. Wind tunnel test methods for rotating anemometer performance
JJG 02-1997 矿用低速风洞检定规程
Mining low-speed wind tunnel verification regulations
GJB 6757-2009 运载火箭低速风洞试验方法
本标准规定了在低速风洞中进行运载火箭测力及地面风载荷试验的方法。 本标准适用于在低速风洞中进行运载火箭测力及地面风载荷试验
Test method of launch vehicle in low speed wind tunnel
HB 8582-2020 翼型气动性能低速风洞测压试验要求
Requirements of pressure measuring test for airfoil aerodynamic performance in the low speed wind tunnel
KS I ISO 17713-1:2009 气象学.风速测量计.第1部分:测定旋转式风速计性能的风洞试验方法
이 표준은 회전풍속계, 특히 컵풍속계와 프로펠러풍속계의 성능 특성을 확인하기 위한 풍동 시
Meteorology-Wind measurements-Part 1:Wind tunnel test methods for rotating anemometer performance
ISO 17713-1:2007 气象学.风速测量计.第1部分:测定旋转式风速计性能的风洞试验方法
1.1 This part of ISO 17713 describes wind tunnel test methods for determining performance characteristics of rotating anemometers, specifically cup
Meteorology - Wind measurements - Part 1: Wind tunnel test methods for rotating anemometer performance
DIN ISO 17713-1:2007 气象学.风力测量.第1部分:旋转风速计性能的风洞试验方法
This part of ISO 17713 describes wind tunnel test methods for determining performance characteristics of totating anemometers,specifically cup
Meteorology - Wind measurements - Part 1: Wind tunnel test methods for rotating anemometer performance (ISO 17713-1:2007) English version of DIN ISO 17713-1:2007-10
GJB 6611-2008 直升机旋翼低速风洞试验方法
本标准规定了在低速风洞中进行直升机常规旋翼模型试验的基本方法。 本标准适用于在低速风洞中进行的直升机旋翼模型试验。在其它试验场所进行的旋翼模型试验,可参考使用本标准
Test method of helicopter rotor model in low speed wind tunnel
GJB 180A-2006 低速风洞飞机模型设计准则
本标准规定了低速风洞飞机模型的设计要求以及制造、检验的精度要求。 本标准适用于我国3m量级低速风洞飞机模型的设计。其它量级低速风洞的飞机模型和其它类型的试验模型可参考使用
Design criteria of aircraft test model in low speed wind tunnel
编辑:北检院编辑部















