楔式动力卡盘检测

JB/T 3860.1-1998 楔式动力卡盘.分类和技术条件

　　本标准规定了楔式动力卡盘，与主轴连接的型式、参数、要求、试验方法、检测规则、标志和包装等。 　　本标准适用于楔式动力卡盘质量的检验与仲裁

Wedge-type power chuck Categorization and technical conditions

JB/T 3860.2-1998 楔式动力卡盘.梳齿卡爪互换性尺寸

　　本标准规定了梳齿齿形、齿距的累计误差、T形槽螺母的互换性尺寸。 　　本标准适用于卡爪为梳齿连接的楔式动力卡盘

Wedge-type power chuck Interchangeability dimensions of comb teeth jaw

JB/T 3860.1-2011 机床.楔式动力卡盘.第1部分：分类和技术条件

JB/T 3860的本部分规定了楔式动力卡盘的连接型式和参数、几何精度检验、试验方法、检验规则、标志和包装等。 本部分适用于机床用楔式动力卡盘，其他动力卡盘也可参照采用

Machine-tools.Wedge-type power-operated chucks.Part 1:Classifications and specifications

JB/T 3860.2-2011 机床.楔式动力卡盘.第2部分：梳齿卡爪互换性尺寸

JB/T 3860的本部分规定了梳齿和爪螺母互换性尺寸。 本部分适用于梳齿连接爪的楔式动力卡盘

Machine-tools.Wedge-type power-operated chucks.Part 2:The sizes for interchangeability with serrated jaws

GOST 24351-1980 车床用自动定心三爪和二爪楔形卡盘及杠杆式楔形卡盘.基本尺寸

Three- and two-jaw lathe self-centring chucks with wedge and lever-type clamps. Basic dimensions

ISO 9401:1991 机床 动力卡盘爪

Specifies 90?and 60?serrations and the T-nuts applicable to 90?and 60?serrations for mounting the top jaws on the base jaws of power chucks, in order

Machine tools; jaw mountings on power chucks

BS ISO 3442-2:2005 机械工具 两片式卡爪自定心卡盘的尺寸和几何测试 舌槽式卡爪动力操作卡盘

Machine tools. Dimensions and geometric tests for self-centring chucks with two-piece jaws - Power-operated chucks with tongue and groove type jaws

DLA DSCC-DWG-84103 REV H-2003 螺旋驱动的3片式楔形止动器电动卡座

This drawing describes the requirements for a family of metal card holders for use with printed circuit boards and circuit card assemblies in moderate

HOLDER, ELECTRICAL CARD, WEDGE RETAINER, 3-PIECE, SCREW ACTUATED

BS ISO 3442-2:2005(2007 机床 两片式卡爪自定心卡盘的尺寸和几何试验 第2部分：舌槽式卡爪动力操作卡盘

Machine tools — Dimensions and geometric tests for self - centring chucks with two - piece jaws — Part 2 : Power - operated chucks with tongue and groove type jaws

ARMY MIL-G-12434 A CANC NOTICE 1-1971 楔式和滚筒式限速器卡绳

This commercial item description covers brown kraft paper used for general wrapping applications

GRIP, CABLE, JAW, WEDGE AND ROLLER TYPE

JB/T 9895.2-1999 数控立式卡盘车床.技术条件

　　本标准规定了数控立式卡盘车床设计、制造及验收要求和检验方法。 本标准适用于卡盘直径小于或等于800mm的数控立式卡盘车床和数控立式卡盘车床

Numerically controlled vertical type chuck lathes Technical conditions

JB/T 13643-2019 动力卡盘 性能试验规范

Power chuck performance test specifications

JB/T 13100-2017 机床 高速精密动力卡盘

High-speed precision power chuck for machine tools

T/CZII 019-2023 机床动力卡盘技术条件

为规范工业产品生产要求，针对机床动力卡盘类产品进行规定，通过对此类的型式和参数、技术要求、试验方法、检验、标志、包装和随行文件进行规定，以提高卡盘性能，助力推动社会绿色可持续发展，特制定本标准

Machine tool power chuck technical conditions

DLA MIL-DTL-8348 J-2003 自备卡盘式指示盘气压压力计组件

This specification covers self-contained, chuck type, high and low air pressure gage assemblies

GAGE ASSEMBLIES, AIR PRESSURE, DIAL INDICATING CHUCK TYPE, SELF-CONTAINED [Use In Lieu Of: DLA MIL-G-008348 G (1)]

JB/T 3860.1-1998 楔式动力卡盘.分类和技术条件

　　本标准规定了楔式动力卡盘，与主轴连接的型式、参数、要求、试验方法、检测规则、标志和包装等。 　　本标准适用于楔式动力卡盘质量的检验与仲裁

Wedge-type power chuck Categorization and technical conditions

JB/T 3860.2-1998 楔式动力卡盘.梳齿卡爪互换性尺寸

　　本标准规定了梳齿齿形、齿距的累计误差、T形槽螺母的互换性尺寸。 　　本标准适用于卡爪为梳齿连接的楔式动力卡盘

Wedge-type power chuck Interchangeability dimensions of comb teeth jaw

JB/T 3860.1-2011 机床.楔式动力卡盘.第1部分：分类和技术条件

JB/T 3860的本部分规定了楔式动力卡盘的连接型式和参数、几何精度检验、试验方法、检验规则、标志和包装等。 本部分适用于机床用楔式动力卡盘，其他动力卡盘也可参照采用

Machine-tools.Wedge-type power-operated chucks.Part 1:Classifications and specifications

JB/T 3860.2-2011 机床.楔式动力卡盘.第2部分：梳齿卡爪互换性尺寸

JB/T 3860的本部分规定了梳齿和爪螺母互换性尺寸。 本部分适用于梳齿连接爪的楔式动力卡盘

Machine-tools.Wedge-type power-operated chucks.Part 2:The sizes for interchangeability with serrated jaws

GOST 24351-1980 车床用自动定心三爪和二爪楔形卡盘及杠杆式楔形卡盘.基本尺寸

Three- and two-jaw lathe self-centring chucks with wedge and lever-type clamps. Basic dimensions

ISO 9401:1991 机床 动力卡盘爪

Specifies 90?and 60?serrations and the T-nuts applicable to 90?and 60?serrations for mounting the top jaws on the base jaws of power chucks, in order

Machine tools; jaw mountings on power chucks

BS ISO 3442-2:2005 机械工具 两片式卡爪自定心卡盘的尺寸和几何测试 舌槽式卡爪动力操作卡盘

Machine tools. Dimensions and geometric tests for self-centring chucks with two-piece jaws - Power-operated chucks with tongue and groove type jaws

DLA DSCC-DWG-84103 REV H-2003 螺旋驱动的3片式楔形止动器电动卡座

This drawing describes the requirements for a family of metal card holders for use with printed circuit boards and circuit card assemblies in moderate

HOLDER, ELECTRICAL CARD, WEDGE RETAINER, 3-PIECE, SCREW ACTUATED

BS ISO 3442-2:2005(2007 机床 两片式卡爪自定心卡盘的尺寸和几何试验 第2部分：舌槽式卡爪动力操作卡盘

Machine tools — Dimensions and geometric tests for self - centring chucks with two - piece jaws — Part 2 : Power - operated chucks with tongue and groove type jaws

ARMY MIL-G-12434 A CANC NOTICE 1-1971 楔式和滚筒式限速器卡绳

This commercial item description covers brown kraft paper used for general wrapping applications

GRIP, CABLE, JAW, WEDGE AND ROLLER TYPE

JB/T 9895.2-1999 数控立式卡盘车床.技术条件

　　本标准规定了数控立式卡盘车床设计、制造及验收要求和检验方法。 本标准适用于卡盘直径小于或等于800mm的数控立式卡盘车床和数控立式卡盘车床

Numerically controlled vertical type chuck lathes Technical conditions

JB/T 13643-2019 动力卡盘 性能试验规范

Power chuck performance test specifications

JB/T 13100-2017 机床 高速精密动力卡盘

High-speed precision power chuck for machine tools

T/CZII 019-2023 机床动力卡盘技术条件

为规范工业产品生产要求，针对机床动力卡盘类产品进行规定，通过对此类的型式和参数、技术要求、试验方法、检验、标志、包装和随行文件进行规定，以提高卡盘性能，助力推动社会绿色可持续发展，特制定本标准

Machine tool power chuck technical conditions

DLA MIL-DTL-8348 J-2003 自备卡盘式指示盘气压压力计组件

This specification covers self-contained, chuck type, high and low air pressure gage assemblies

GAGE ASSEMBLIES, AIR PRESSURE, DIAL INDICATING CHUCK TYPE, SELF-CONTAINED [Use In Lieu Of: DLA MIL-G-008348 G (1)]