DB23/T 1621.10-2015 黑龙江省建设工程施工操作技术规程 建筑围护结构节能工程
Heilongjiang Province Construction Engineering Construction Operation Technical Regulations Building Enclosure Structure Energy Saving Engineering
BOCA CHAPTER 4 NECC-1993 建筑围护结构节能与暖通空调系统节能
The BOCA National Mechanical Code was initially prepared and updated on the premise that adequate code requirements are essential to the safe
Heating, Ventilating and Air-Conditioning Systems and Equipment
T/CECS 899-2021 高性能建筑围护结构节能技术导则
主要技术内容包括：总则、术语、基本规定、技术指标、设计、施工要点、工程验收等
Technical Guidelines for Energy Conservation of High-Performance Building Envelope Structure
GB/T 34606-2017 建筑围护结构整体节能性能评价方法
Evaluation method of overall energy-saving performance of building envelope
DB37/T 5015-2014 EPS模块工业建筑围护结构技术规程
本规程适用于国家标准《建筑设计防火规范》GB50016中火灾危险性类别为丙类以下（含丙类）EPS模块工业建筑外围护结构的设计、施工和工程质量验收
EPS modular industrial building envelope technical specification
NF EN 62194:2006 围护结构热性能评价方法
Méthode d'évaluation de la performance thermique des enveloppes
BOCA ARTICLE 3 NECC-1990 建筑围护结构
The BOCA National Mechanical Code was initially prepared and updated on the premise that adequate code requirements are essential to the safe
Building Envelope
BOCA CHAPTER 3 NECC-1993 建筑围护结构
This appendix contains various illustrations and diagrams of typical applications of specific code provisions to one- and two-family dwellings
Building Envelope
DB23/T 1390-2017 工业建筑EPS模块低能耗围护结构技术标准
Technical standard for low-energy building envelope of EPS modules for industrial buildings
DB42/T 1223-2016 EPS空心模块工业建筑围护结构保温技术规程
Technical specification for thermal insulation of EPS hollow module industrial building envelope
T/SJZSYYQXH JZ009-2023 建筑围护结构热工性能现场检测设备 校准方法
3 概述 建筑围护结构热工性能现场检测设备用于检测围护结构的保温隔热性能或热传导性能。 4 计量特性 4.1 温度部分 控制范围(-60～100)℃，最大允许误差±0.5
Calibration method of on-site testing equipment for thermal performance of building envelope
GOST R 59242-2020 建筑物和建筑 围护结构温度场节点计算
Buildings and constructions. Calculation of temperature field nodes of enclosing structures
SC/T 9008.3-1997 冷库主要热工性能试验方法.围护结构热流量检测
本标准规定了土建冷库及装配式冷库保温性能中围护结构热流盆或传热系数的检测方法。 本标准适用于各型新旧冷库冷间隔热性能的测定
Methods of testing for main heat engineering perfomance on cold storage.Heat flux testing for envelope construction
GOST 14254-2015 围护结构防护等级 (IP代码)
Degrees of protection provided by enclosures (IP Code)
DS/ISO/TR 13387-6:2000 消防安全工程 第6部分：结构响应和火势蔓延超出起源围护结构
This Part of ISO/TR 13387 is intended to provide general guidance on the use of engineering methods for the prediction of fire spread within
Fire safety engineering - Part 6: Structural response and fire spread beyond the enclosure of origin
DB23/T 1621.10-2015 黑龙江省建设工程施工操作技术规程 建筑围护结构节能工程
Heilongjiang Province Construction Engineering Construction Operation Technical Regulations Building Enclosure Structure Energy Saving Engineering
BOCA CHAPTER 4 NECC-1993 建筑围护结构节能与暖通空调系统节能
The BOCA National Mechanical Code was initially prepared and updated on the premise that adequate code requirements are essential to the safe
Heating, Ventilating and Air-Conditioning Systems and Equipment
T/CECS 899-2021 高性能建筑围护结构节能技术导则
主要技术内容包括：总则、术语、基本规定、技术指标、设计、施工要点、工程验收等
Technical Guidelines for Energy Conservation of High-Performance Building Envelope Structure
GB/T 34606-2017 建筑围护结构整体节能性能评价方法
Evaluation method of overall energy-saving performance of building envelope
DB37/T 5015-2014 EPS模块工业建筑围护结构技术规程
本规程适用于国家标准《建筑设计防火规范》GB50016中火灾危险性类别为丙类以下（含丙类）EPS模块工业建筑外围护结构的设计、施工和工程质量验收
EPS modular industrial building envelope technical specification
NF EN 62194:2006 围护结构热性能评价方法
Méthode d'évaluation de la performance thermique des enveloppes
BOCA ARTICLE 3 NECC-1990 建筑围护结构
The BOCA National Mechanical Code was initially prepared and updated on the premise that adequate code requirements are essential to the safe
Building Envelope
BOCA CHAPTER 3 NECC-1993 建筑围护结构
This appendix contains various illustrations and diagrams of typical applications of specific code provisions to one- and two-family dwellings
Building Envelope
DB23/T 1390-2017 工业建筑EPS模块低能耗围护结构技术标准
Technical standard for low-energy building envelope of EPS modules for industrial buildings
DB42/T 1223-2016 EPS空心模块工业建筑围护结构保温技术规程
Technical specification for thermal insulation of EPS hollow module industrial building envelope
T/SJZSYYQXH JZ009-2023 建筑围护结构热工性能现场检测设备 校准方法
3 概述 建筑围护结构热工性能现场检测设备用于检测围护结构的保温隔热性能或热传导性能。 4 计量特性 4.1 温度部分 控制范围(-60～100)℃，最大允许误差±0.5
Calibration method of on-site testing equipment for thermal performance of building envelope
GOST R 59242-2020 建筑物和建筑 围护结构温度场节点计算
Buildings and constructions. Calculation of temperature field nodes of enclosing structures
SC/T 9008.3-1997 冷库主要热工性能试验方法.围护结构热流量检测
本标准规定了土建冷库及装配式冷库保温性能中围护结构热流盆或传热系数的检测方法。 本标准适用于各型新旧冷库冷间隔热性能的测定
Methods of testing for main heat engineering perfomance on cold storage.Heat flux testing for envelope construction
GOST 14254-2015 围护结构防护等级 (IP代码)
Degrees of protection provided by enclosures (IP Code)
DS/ISO/TR 13387-6:2000 消防安全工程 第6部分：结构响应和火势蔓延超出起源围护结构
This Part of ISO/TR 13387 is intended to provide general guidance on the use of engineering methods for the prediction of fire spread within
Fire safety engineering - Part 6: Structural response and fire spread beyond the enclosure of origin
编辑：北检院编辑部
