测量显微镜检测

📅 发布时间:2024-05-27 👤 来源:北检院 👁 阅读:

JB/T 9339-1999 测量显微镜

  本标准规定了测量显微镜技术要求、试验方法、检验规则。   本标准适用于按直角坐标和极坐标测量零件的长度和角度的测量显微镜

Measuring microscope

JIS B 7153:1995 测量显微镜

この規格は,長さ,角度,輪郭などを測定すろ測定顕微鏡について規定する(付図1参照

Measuring microscopes

JJG 571-2004 读数、测量显微镜

Reading Microscope and Measuring Microscope

JJG 571-1988 测量显微镜检定规程

Verification Regulation of Measuring Microscope

GB/T 6462-2005 金属和氧化物覆盖层 厚度测量 显微镜法

本标准规定了运用光学显微镜检验测横断面,以测量金属覆盖层、氧化膜层和釉瓷或玻璃搪瓷覆盖层的局部厚度的方法

Metallic and oxide coatings-Measurement of coating thinckness-Microscopical method

TCVN 6035-1995 纺织品.棉纤维.成熟度的测量.显微镜法

Textiles.Cotton fibres.Evaluation of maturity.Microscopic method

IPC TM-650 2.2.14.1-1995 焊锡粉末颗粒尺寸分布-测量显微镜法

IPC-TR-464 was originally published in April of 1984. This Technical Report was developed to meet the growing need for a standard method

Solder Powder Particle Size Distribution - Measuring Microscope Method

ISO 4912:1981 纺织品 棉纤维 成熟度的测量 显微镜法

As measurements of the degree of wall thickening of the fibres is too laborious for most practical purposes, this method of determination of maturity

Textiles; Cotton fibres; Evaluation of maturity; Microscopic method

NP 3160-1986 纺织品.纤维直径的测量.显微镜投影法

A presente Norma destina-se a estabelecer o método para a determina??o do di?metro das fibras de l? por meio do microscópio de projec??o. 0 método

textile. Measurement of fiber diameter. Microscope projection method

SIS SS-ISO 1463:1983 金属和氧化涂层.涂层厚度的测量.显微镜法

This International Standard specifies a method for the measurement of the local thickness of metallic coatings, oxide layers, and porcelain

Meta I lic and oxide coatings - Measure- ment of coating thickness - Microscopi- cal method

SANS 144:1982 金属和氧化物涂层.涂层厚度测量.显微镜法

This International Standard specifies a method for the measurement of the local thickness of metallic coatings, oxide layers, and porcelain

Metallic and oxide coatings - Measurement of coating thickness - Microscopical method

ISO 1463:2021 金属和氧化物涂层 - 涂层厚度测量 - 显微镜法

This document specifies a method for the measurement of the local thickness of metallic coatings, oxide layers, and porcelain or vitreous enamel

Metallic and oxide coatings — Measurement of coating thickness — Microscopical method

NF A91-110:2004 金属和氧化物镀层.镀层厚度的测量.显微镜法

Metallic and oxide coatings - Measurement of coating thickness - Microscopical method.

NF A91-110*NF EN ISO 1463:2021 金属和氧化物镀层. 镀层厚度的测量. 显微镜法

Metallic and oxide coatings - Measurement of coating thickness - Microscopical method

DS/EN ISO 1463:1994 金属和氧化覆盖层.覆盖层厚度测量.显微镜法

Denne standard specificerer en metode til m?ling af lokal lag-tykkelse af metalbel?gninger, oxidlag og porcel?n- eller emaljebel?gninger ved unders

Metallic and oxide coatings - Measurement of coating thickness - Microscopical method

JB/T 9339-1999 测量显微镜

  本标准规定了测量显微镜技术要求、试验方法、检验规则。   本标准适用于按直角坐标和极坐标测量零件的长度和角度的测量显微镜

Measuring microscope

JIS B 7153:1995 测量显微镜

この規格は,長さ,角度,輪郭などを測定すろ測定顕微鏡について規定する(付図1参照

Measuring microscopes

JJG 571-2004 读数、测量显微镜

Reading Microscope and Measuring Microscope

JJG 571-1988 测量显微镜检定规程

Verification Regulation of Measuring Microscope

GB/T 6462-2005 金属和氧化物覆盖层 厚度测量 显微镜法

本标准规定了运用光学显微镜检验测横断面,以测量金属覆盖层、氧化膜层和釉瓷或玻璃搪瓷覆盖层的局部厚度的方法

Metallic and oxide coatings-Measurement of coating thinckness-Microscopical method

TCVN 6035-1995 纺织品.棉纤维.成熟度的测量.显微镜法

Textiles.Cotton fibres.Evaluation of maturity.Microscopic method

IPC TM-650 2.2.14.1-1995 焊锡粉末颗粒尺寸分布-测量显微镜法

IPC-TR-464 was originally published in April of 1984. This Technical Report was developed to meet the growing need for a standard method

Solder Powder Particle Size Distribution - Measuring Microscope Method

ISO 4912:1981 纺织品 棉纤维 成熟度的测量 显微镜法

As measurements of the degree of wall thickening of the fibres is too laborious for most practical purposes, this method of determination of maturity

Textiles; Cotton fibres; Evaluation of maturity; Microscopic method

NP 3160-1986 纺织品.纤维直径的测量.显微镜投影法

A presente Norma destina-se a estabelecer o método para a determina??o do di?metro das fibras de l? por meio do microscópio de projec??o. 0 método

textile. Measurement of fiber diameter. Microscope projection method

SIS SS-ISO 1463:1983 金属和氧化涂层.涂层厚度的测量.显微镜法

This International Standard specifies a method for the measurement of the local thickness of metallic coatings, oxide layers, and porcelain

Meta I lic and oxide coatings - Measure- ment of coating thickness - Microscopi- cal method

SANS 144:1982 金属和氧化物涂层.涂层厚度测量.显微镜法

This International Standard specifies a method for the measurement of the local thickness of metallic coatings, oxide layers, and porcelain

Metallic and oxide coatings - Measurement of coating thickness - Microscopical method

ISO 1463:2021 金属和氧化物涂层 - 涂层厚度测量 - 显微镜法

This document specifies a method for the measurement of the local thickness of metallic coatings, oxide layers, and porcelain or vitreous enamel

Metallic and oxide coatings — Measurement of coating thickness — Microscopical method

NF A91-110:2004 金属和氧化物镀层.镀层厚度的测量.显微镜法

Metallic and oxide coatings - Measurement of coating thickness - Microscopical method.

NF A91-110*NF EN ISO 1463:2021 金属和氧化物镀层. 镀层厚度的测量. 显微镜法

Metallic and oxide coatings - Measurement of coating thickness - Microscopical method

DS/EN ISO 1463:1994 金属和氧化覆盖层.覆盖层厚度测量.显微镜法

Denne standard specificerer en metode til m?ling af lokal lag-tykkelse af metalbel?gninger, oxidlag og porcel?n- eller emaljebel?gninger ved unders

Metallic and oxide coatings - Measurement of coating thickness - Microscopical method

编辑:北检院编辑部

我们的优势

选择北检院的六大理由

📚

CMA/CNAS 双认证

旗下实验室具备国家认证认可监督管理委员会CMA资质认定及中国合格评定国家认可委员会CNAS实验室认可,检测报告具有国际公信力。

🔬

1000+ 台套先进设备

配备扫描电镜、气质联用仪、电感耦合等离子体质谱仪等国际先进检测仪器,确保数据精准可靠。

🏢

15000+ 平米实验室

拥有规模化专业检测基地,涵盖材料、化工、食品、环境等多个专业实验室,满足多领域检测需求。

👥

资深技术团队

汇聚材料科学、化学分析、环境工程等领域专家,拥有10年+行业经验,提供专业可靠的检测分析服务。

⏱

快速响应机制

标准检测周期短至3个工作日,加急服务24小时出具报告,全程一对一工程师跟进,确保高效交付。

🌎

全国服务网络

总部位于北京,山东设立分部,服务覆盖全国,为20万+客户提供便捷的一站式检测解决方案。

荣誉资质

旗下实验室资质荣誉

CMA 检验检测机构资质认定

CMA 检验检测机构资质认定

国家认证认可监督管理委员会颁发,具备向社会出具具有证明作用数据的资质。

CNAS 实验室认可证书

CNAS 实验室认可证书

中国合格评定国家认可委员会认可,检测结果获国际互认,具有国际公信力。

ISO 质量管理体系认证

ISO 质量管理体系认证

通过ISO 质量管理体系认证,管理体系实现规范化、标准化。

绿色低碳诚信示范创建企业

绿色低碳诚信示范创建企业

荣获绿色低碳诚信示范创建企业称号,践行可持续发展理念,推动绿色低碳转型,助力"双碳"目标实现。

北京市创新型中小企业

北京市"创新型"中小企业

经北京市经济和信息化局认定的创新型中小企业,具备较强创新能力与较高专业化水平,是优质中小企业梯度培育体系的重要基础力量。

北京市专精特新中小企业

北京市"专精特新"中小企业

经北京市经济和信息化局认定的专精特新中小企业,具备专业化、精细化、特色化、新颖化发展特征,在细分领域具有较强竞争优势。

查看全部资质

仪器设备

国际先进检测仪器,确保检测数据精准可靠

查看全部设备

检测流程

标准化流程,高效交付

01

需求沟通

客户提交检测需求,技术顾问一对一沟通,明确检测项目与标准。

➔
02

样品寄送

客户按照规范要求寄送样品,实验室确认样品状态与数量。

➔
03

实验检测

专业工程师按照标准方法进行检测分析,全程质量控制。

➔
04

数据审核

检测数据经多级审核,确保结果准确、可靠、可追溯。

➔
05

报告出具

出具检测报告,支持电子版与纸质版,快递送达。

VR实验室720°全景 NEW · 全新上线 VR实验室上线啦! 720°全景实景观览 · 足不出户走进实验室 立即体验 检测咨询 · 立即在线沟通