服务热线:400-635-0567

混凝土性能检测

发布时间:2024-05-27 17:49:26 - 更新时间:2024年06月29日 15:22

点击量:0

工业诊断 动物实验 植物学检测 环境试验

ACI SP-207-2002 结构的高和质量

INTRODUCTION Concrete in normal conditions is a versatile@ strong and durable construction material. However under several physical and chemical

High-Performance Concrete Performance and Quality of Concrete Structures

ACI ITG-8R-2010 要求报告

"Objective and scope The objectives of this report are to: ? Provide an introduction to performance specification and how it compares

Report on Performance-Based Requirements for Concrete

ACI 329R-2014 要求报告

Objective and scope The objectives of this report are as follows: a) Provide an introduction to performance specifications and discuss how

Report on Performance-Based Requirements for Concrete

ACI SP-122-1990 Paul Klieger讨论会“

Paul Klieger Symposium on Performance of Concrete

ACI SP-136-1992 结构轻骨料

"PREFACE: This volume is a compilation of papers addressing the ""Performance of Structural Lightweight Concrete"" presented at the November 14@ 1991

Structural Lightweight Aggregate Concrete Performance

T/CCPA 1-2012 结构技术规范

混凝土结构的使用环境条件与耐久性要求;“混凝土性能技术要求”文件的编制;混凝土及其组成材料的质量要求;混凝土配合比设计的原则;新拌混凝土;硬化混凝土; 新拌混凝土的交货和验收

Specification of Performance Requirements of Structural Concrete

ACI 544.2R-1989 纤维增强的测量

This report applies to conventionally mixed and placed fiber reinforced concrete (FRC) or fiber reinforced shotcrete (FRS) using steel@ glass

Measurement of Properties of Fiber Reinforced Concrete

GB/T 11969-2008 蒸压加气试验方法

本标准规定了蒸压加气混凝土的干密度、含水率、吸水率、力学性能(抗压强度、劈裂抗拉强度、抗折强度、轴心抗压强度、静力受压弹性模量)、干燥收缩、抗冻性、碳化、干湿循环的试验方法、结果评定和试验报告。 本标准适用于蒸压加气混凝土

Test methods of autoclaved aerated concrete

GB/T 11969-2020 蒸压加气试验方法

本标准规定了蒸压加气混凝土干密度、含水率和吸水率、力学性能、干燥收缩、抗冻性、碳化、干湿循环等项目的试验方法和试验报告。 本标准适用于民用与工业建筑物中使用的蒸压加气混凝土

Test methods of autoclaved aerated concrete

DS/EN 15191:2010 预制制品 玻璃纤维分类

This European Standard deals with the classification of glassfibre reinforced concrete. This classification conforms to the needs of the design

Precast concrete products - Classification of glassfibre reinforced concrete performance

LST EN 15191-2010 预制制品 玻璃纤维分类

Precast concrete products - Classification of glassfibre reinforced concrete performance

UNE-EN 15191:2011 预制制品 玻璃纤维分类

Precast concrete products - Classification of glassfibre reinforced concrete performance

GB/T 11969-1997 加气试验方法总则

本标准规定了加气混凝土的体积密度、含水率、吸水率、抗压强度、抗拉强度、抗折强度、轴心抗压强度、静力受压弹性模量、干燥收缩、抗冻、碳化、干湿循环和导热系数试验用的试件、结果评定和试验报告 本标准适用于加气混凝土

General requirements for test methods of aerated concrete

NBN B 15-001-1992 ,生产,试用以及标准

Concrete. Performance, production, trials and standards

CNS 11152-1984 根据钢筋握裹力比较试验法

本标准规定以钢筋在混凝土中之握里力为根据进而比较混凝土性能之试验方法。但不适用于以钢筋尺度及型类为主要变量之试验,亦祩以结构设计为目的而建立握里力数值。本标准纯以所述各种变化状况作为研究之用,而非实际应用

Method of Test for Comparing Concrete on the Basis of the Bond Developed wirh Reinforfing

ACI SP-207-2002 结构的高和质量

INTRODUCTION Concrete in normal conditions is a versatile@ strong and durable construction material. However under several physical and chemical

High-Performance Concrete Performance and Quality of Concrete Structures

ACI ITG-8R-2010 要求报告

"Objective and scope The objectives of this report are to: ? Provide an introduction to performance specification and how it compares

Report on Performance-Based Requirements for Concrete

ACI 329R-2014 要求报告

Objective and scope The objectives of this report are as follows: a) Provide an introduction to performance specifications and discuss how

Report on Performance-Based Requirements for Concrete

ACI SP-122-1990 Paul Klieger讨论会“

Paul Klieger Symposium on Performance of Concrete

ACI SP-136-1992 结构轻骨料

"PREFACE: This volume is a compilation of papers addressing the ""Performance of Structural Lightweight Concrete"" presented at the November 14@ 1991

Structural Lightweight Aggregate Concrete Performance

T/CCPA 1-2012 结构技术规范

混凝土结构的使用环境条件与耐久性要求;“混凝土性能技术要求”文件的编制;混凝土及其组成材料的质量要求;混凝土配合比设计的原则;新拌混凝土;硬化混凝土; 新拌混凝土的交货和验收

Specification of Performance Requirements of Structural Concrete

ACI 544.2R-1989 纤维增强的测量

This report applies to conventionally mixed and placed fiber reinforced concrete (FRC) or fiber reinforced shotcrete (FRS) using steel@ glass

Measurement of Properties of Fiber Reinforced Concrete

GB/T 11969-2008 蒸压加气试验方法

本标准规定了蒸压加气混凝土的干密度、含水率、吸水率、力学性能(抗压强度、劈裂抗拉强度、抗折强度、轴心抗压强度、静力受压弹性模量)、干燥收缩、抗冻性、碳化、干湿循环的试验方法、结果评定和试验报告。 本标准适用于蒸压加气混凝土

Test methods of autoclaved aerated concrete

GB/T 11969-2020 蒸压加气试验方法

本标准规定了蒸压加气混凝土干密度、含水率和吸水率、力学性能、干燥收缩、抗冻性、碳化、干湿循环等项目的试验方法和试验报告。 本标准适用于民用与工业建筑物中使用的蒸压加气混凝土

Test methods of autoclaved aerated concrete

DS/EN 15191:2010 预制制品 玻璃纤维分类

This European Standard deals with the classification of glassfibre reinforced concrete. This classification conforms to the needs of the design

Precast concrete products - Classification of glassfibre reinforced concrete performance

LST EN 15191-2010 预制制品 玻璃纤维分类

Precast concrete products - Classification of glassfibre reinforced concrete performance

UNE-EN 15191:2011 预制制品 玻璃纤维分类

Precast concrete products - Classification of glassfibre reinforced concrete performance

GB/T 11969-1997 加气试验方法总则

本标准规定了加气混凝土的体积密度、含水率、吸水率、抗压强度、抗拉强度、抗折强度、轴心抗压强度、静力受压弹性模量、干燥收缩、抗冻、碳化、干湿循环和导热系数试验用的试件、结果评定和试验报告 本标准适用于加气混凝土

General requirements for test methods of aerated concrete

NBN B 15-001-1992 ,生产,试用以及标准

Concrete. Performance, production, trials and standards

CNS 11152-1984 根据钢筋握裹力比较试验法

本标准规定以钢筋在混凝土中之握里力为根据进而比较混凝土性能之试验方法。但不适用于以钢筋尺度及型类为主要变量之试验,亦祩以结构设计为目的而建立握里力数值。本标准纯以所述各种变化状况作为研究之用,而非实际应用

Method of Test for Comparing Concrete on the Basis of the Bond Developed wirh Reinforfing

下一篇: 装饰石材检测
检测流程
填写并提交定制服务需求表
技术评估和方案讨论
对选定的试验方法进行报价
合同签定与付款
按期交付检测报告和相关数据
想了解更多检测项目
请点击咨询在线工程师
点击咨询
联系我们
服务热线:400-635-0567
地址:北京市丰台区航丰路8号院1号楼1层121
邮编:10000
总机:400-635-0567
联系我们

服务热线:400-635-0567

投诉建议:010-82491398

报告问题解答:010-8646-0567-8

周期、价格等

咨询

技术咨询