T/ZZB 0767-2018 空调水系统用电动阀门
本标准规定了空调水系统用电动阀门(以下简称“电动阀”)的术语和定义、型式和基本参数、基本要求、技术要求、试验方法、检验规则、标志、包装、运输和贮存、质量承诺等。 本标准适用于公称压力PN不大于1.6MPa, 公称通径DN15 ～ DN200，工作介质为水，介质温度为0
Motor driven valve for air-conditioning water system
JB/T 10768-2007 空调水系统用电动阀门
本标准规定了空调水系统用电动阀门的术语和定义、型式与基本参数、要求、试验方法、检验规则、标志、包装、运输和贮存等。 本标准适用于公称压力PN不大于1.6MPa，公称通径DN15mm～200mm，工作介质为水，介质温度为0℃～100℃，电机功率为不小于2W，电气规格为24V、36V、220V
Motor driven valve for air-conditioning water system
JB/T 17768-2007 空调水系统用电动阀门
Electric valves for air conditioning water systems
DIN 21635:2016 空气调节系统.空气阀门.结构和操作
Air regulation systems in mining - Air locks - Building and operation
DIN 21635:1998 空气调节系统.空气阀门.结构和操作
The document applies to air locks in level and inclined mine excavations. In addition to the definition of different terms the safety requirements
Air regulation systems in mining - Air locks - Building and operation
GB/T 28636-2012 采暖与空调系统水力平衡阀
本标准规定了采暖与空调系统水力平衡阀（以下简称平衡阀）的术语和定义、结构、分类、规格、公称压力与型号，材料，要求，试验方法，检验规则，以及标志、使用说明书及合格证、包装、运输和贮存等。 本标准适用于在集中供暖和空调循环水（或乙二醇水溶液）系统中，通过手动改变局部阻力调节循环水系统水力平衡阀；其
Heating and air conditioning system hydraulic balance valve
AS 4118.1.5:1996 消防喷水系统．构件．集水阀门和预作用阀门
Specifies the construction, performance and testing requirements for valves used in deluge and pre-action sprinkler systems
Fire sprinkler systems - Components - Deluge and pre-action valves
GB 5135.6-2003 自动喷水灭火系统 第6部分;通用阀门
GB 5135的本部分规定了自动喷水灭火系统用闸阀、蝶阀、球阀、截止阀、消防电磁阀、信号阀等阀门的要求、试验方法和检验规则。 本部分不适用于自动喷水灭火系统湿式报警阀、干式报警阀、雨淋阀。 泡沫灭火系统阀门可参照本部分相关条款
Automatic sprinkler system--Part 6: Convention valve
NAVY MIL-V-24384 B-1988 低气压空气或氮气系统压力调节阀门
This specification covers self-contained pressure regulating valves with a nominal pressure rating of 150 pounds per square inch (lb/in2) gauge
VALVES, PRESSURE REGULATING, FOR LOW PRESSURE AIR OR NITROGEN SYSTEMS
EJ/T 1022.13-1996 压水堆核电厂阀门 操纵系统
Valve Control System of Pressurized Water Reactor Nuclear Power Plant
GB/T 37323-2019 船用气动阀门遥控系统
Marine pneumatic valve remote control system
GB 5135.6-2018 自动喷水灭火系统 第6部分：通用阀门
Automatic sprinkler systems—Part 6: Conventional valves
AS 1357.1:2004 主要用于热水系统的阀门.保护阀
Sets out requirements for the design, construction, testing and performance of the following types of valves within the range of DN 15 to DN 50; a.
Valves primarily for use in heated water systems - Protection valves
AS 1357.2:2005 主要用于热水系统的阀门.控制阀
Sets out requirements for the design, construction, testing and performance of control valves
Valves primarily for use in heated water systems - Control valves
AS 1357.2:2005(R2015)/Amdt 2:2009 主要用于热水系统的阀门 控制阀
Valve control valve mainly used in hot water systems
T/ZZB 0767-2018 空调水系统用电动阀门
本标准规定了空调水系统用电动阀门(以下简称“电动阀”)的术语和定义、型式和基本参数、基本要求、技术要求、试验方法、检验规则、标志、包装、运输和贮存、质量承诺等。 本标准适用于公称压力PN不大于1.6MPa, 公称通径DN15 ～ DN200，工作介质为水，介质温度为0
Motor driven valve for air-conditioning water system
JB/T 10768-2007 空调水系统用电动阀门
本标准规定了空调水系统用电动阀门的术语和定义、型式与基本参数、要求、试验方法、检验规则、标志、包装、运输和贮存等。 本标准适用于公称压力PN不大于1.6MPa，公称通径DN15mm～200mm，工作介质为水，介质温度为0℃～100℃，电机功率为不小于2W，电气规格为24V、36V、220V
Motor driven valve for air-conditioning water system
JB/T 17768-2007 空调水系统用电动阀门
Electric valves for air conditioning water systems
DIN 21635:2016 空气调节系统.空气阀门.结构和操作
Air regulation systems in mining - Air locks - Building and operation
DIN 21635:1998 空气调节系统.空气阀门.结构和操作
The document applies to air locks in level and inclined mine excavations. In addition to the definition of different terms the safety requirements
Air regulation systems in mining - Air locks - Building and operation
GB/T 28636-2012 采暖与空调系统水力平衡阀
本标准规定了采暖与空调系统水力平衡阀（以下简称平衡阀）的术语和定义、结构、分类、规格、公称压力与型号，材料，要求，试验方法，检验规则，以及标志、使用说明书及合格证、包装、运输和贮存等。 本标准适用于在集中供暖和空调循环水（或乙二醇水溶液）系统中，通过手动改变局部阻力调节循环水系统水力平衡阀；其
Heating and air conditioning system hydraulic balance valve
AS 4118.1.5:1996 消防喷水系统．构件．集水阀门和预作用阀门
Specifies the construction, performance and testing requirements for valves used in deluge and pre-action sprinkler systems
Fire sprinkler systems - Components - Deluge and pre-action valves
GB 5135.6-2003 自动喷水灭火系统 第6部分;通用阀门
GB 5135的本部分规定了自动喷水灭火系统用闸阀、蝶阀、球阀、截止阀、消防电磁阀、信号阀等阀门的要求、试验方法和检验规则。 本部分不适用于自动喷水灭火系统湿式报警阀、干式报警阀、雨淋阀。 泡沫灭火系统阀门可参照本部分相关条款
Automatic sprinkler system--Part 6: Convention valve
NAVY MIL-V-24384 B-1988 低气压空气或氮气系统压力调节阀门
This specification covers self-contained pressure regulating valves with a nominal pressure rating of 150 pounds per square inch (lb/in2) gauge
VALVES, PRESSURE REGULATING, FOR LOW PRESSURE AIR OR NITROGEN SYSTEMS
EJ/T 1022.13-1996 压水堆核电厂阀门 操纵系统
Valve Control System of Pressurized Water Reactor Nuclear Power Plant
GB/T 37323-2019 船用气动阀门遥控系统
Marine pneumatic valve remote control system
GB 5135.6-2018 自动喷水灭火系统 第6部分：通用阀门
Automatic sprinkler systems—Part 6: Conventional valves
AS 1357.1:2004 主要用于热水系统的阀门.保护阀
Sets out requirements for the design, construction, testing and performance of the following types of valves within the range of DN 15 to DN 50; a.
Valves primarily for use in heated water systems - Protection valves
AS 1357.2:2005 主要用于热水系统的阀门.控制阀
Sets out requirements for the design, construction, testing and performance of control valves
Valves primarily for use in heated water systems - Control valves
AS 1357.2:2005(R2015)/Amdt 2:2009 主要用于热水系统的阀门 控制阀
Valve control valve mainly used in hot water systems
编辑：北检院编辑部
