服务热线:400-635-0567

真空炉检测

发布时间:2024-03-15 14:29:42

点击量:0

工业诊断 动物实验 植物学检测 环境试验

JB/T 5624-1991 电器件 能耗分等

Electron tube vacuum furnace. Grading of energy consumption

YS/T 1126-2016 电阻式超高温

Resistance ultra-high temperature vacuum furnace

SJ/T 11668-2017 电器件能源消耗规范

Energy consumption specifications for vacuum furnaces for electric vacuum devices

FORD FLTM BO 024-02-2001 尼龙中水分含量的测定.

DETERMINATION OF MOISTURE CONTENT OF NYLON - VACUUM OVEN METHOD

JB/T 10550-2006 技术.烧结

本标准规定了内热式电阻加热式真空烧锅炉(以下简称真空炉)的型式与基本参数、技术要求、测量方法、检验规则、标志、包装、运输、贮存及订购等。 本标准适用于真空状态下材料通过加热、加热和机械压力或加热和气体压力作用,使相邻晶粒通过粘着和扩散而烧结成的零件的真空炉

Vacuum technology.Vacuum sintering furnace

SANS 5924:1978 用于一般分析的煤样水分含量(测湿法)

Moisture content of coal samples intended for general analysis (vacuum-oven method): SECTION 1. PRINCIPLE; SECTION 2. APPARATUS AND MATERIALS

Moisture content of coal samples intended for general analysis (vacuum-oven method)

SAE AMS2678-2006 内部分钎焊

This specification covers the requirements and procedures for the brazing of parts in a very low pressure gas which referred to as "vacuum" herein

Furnace Brazing of Parts in a Vacuum Atmosphere

ASTM D7944-22 使用回收乳化沥青残留物的标准实施规程

1.1 This practice is suitable for recovery of the residue of emulsified asphalts composed principally of a semisolid or liquid asphaltic base, water

Standard Practice for Recovery of Emulsified Asphalt Residue Using a Vacuum Oven

ASTM D7944-15 使用回收乳化沥青残留物的标准实施规程

4.1 This practice can be used to obtain residues

Standard Practice for Recovery of Emulsified Asphalt Residue Using a Vacuum Oven

ASME SEC IV MA APP 5-2001 附录5.强制性

Boiler and Pressure Vessel.Appendix 5 - Mandatory Vacuum Boilers

Appendix 5 - Mandatory Vacuum Boilers

JB/T 8195.4-1999 间接电阻.ZC系列淬火

1.1 本标准规定了对ZC系列真空淬火炉产品的各项要求,包括品种规格、技术性能及其订购和供货等。 1.2 本标准适用于按4.1,5.1和5.2设计,主要用于金属材料在真空状态下进行气淬和油淬的卧式真空电阻炉。 1.3 真空炉的企业产品标准应按GB/T

Indirect resistance furnaces ZC series vacuum quenching furnaces

YB/T 4782-2019 自耗结晶器

Vacuum consumable furnace crystallizer

T/QGCML 2114-2023 锂电池干燥

本文件规定了锂电池真空干燥炉的术语和定义、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本文件适用于软包、圆柱、铝壳等类型锂离子电池使用的电池真空干燥炉,以下简称“干燥炉

Lithium battery vacuum drying oven

TP 86-2010 用测试沥青密封剂和填料加速老化的标准方法(修订版 1)

This method applies to bituminous crack sealants and fillers used in the construction and maintenance of roadways. The method covers the accelerated

Standard Method of Test for Accelerated Aging of Bituminous Sealants and Fillers with a Vacuum Oven (Revision 1)

JB/T 10551-2006 技术.感应熔炼

本标准规定了对真空感应熔炼炉(以下简称真空炉)的型式与基本参数、技术要求、试验方法、检验规则和标志、包装、运输、贮存及订货等。 本标准适用于频率大于60Hz小于等于104Hz下的真空感应熔炼炉,包括供熔炼、保温、升温、浇铸用的各种感应熔炼炉

Vacuum technology.Vacuum induction melting furnace

JB/T 5624-1991 电器件 能耗分等

Electron tube vacuum furnace. Grading of energy consumption

YS/T 1126-2016 电阻式超高温

Resistance ultra-high temperature vacuum furnace

SJ/T 11668-2017 电器件能源消耗规范

Energy consumption specifications for vacuum furnaces for electric vacuum devices

FORD FLTM BO 024-02-2001 尼龙中水分含量的测定.

DETERMINATION OF MOISTURE CONTENT OF NYLON - VACUUM OVEN METHOD

JB/T 10550-2006 技术.烧结

本标准规定了内热式电阻加热式真空烧锅炉(以下简称真空炉)的型式与基本参数、技术要求、测量方法、检验规则、标志、包装、运输、贮存及订购等。 本标准适用于真空状态下材料通过加热、加热和机械压力或加热和气体压力作用,使相邻晶粒通过粘着和扩散而烧结成的零件的真空炉

Vacuum technology.Vacuum sintering furnace

SANS 5924:1978 用于一般分析的煤样水分含量(测湿法)

Moisture content of coal samples intended for general analysis (vacuum-oven method): SECTION 1. PRINCIPLE; SECTION 2. APPARATUS AND MATERIALS

Moisture content of coal samples intended for general analysis (vacuum-oven method)

SAE AMS2678-2006 内部分钎焊

This specification covers the requirements and procedures for the brazing of parts in a very low pressure gas which referred to as "vacuum" herein

Furnace Brazing of Parts in a Vacuum Atmosphere

ASTM D7944-22 使用回收乳化沥青残留物的标准实施规程

1.1 This practice is suitable for recovery of the residue of emulsified asphalts composed principally of a semisolid or liquid asphaltic base, water

Standard Practice for Recovery of Emulsified Asphalt Residue Using a Vacuum Oven

ASTM D7944-15 使用回收乳化沥青残留物的标准实施规程

4.1 This practice can be used to obtain residues

Standard Practice for Recovery of Emulsified Asphalt Residue Using a Vacuum Oven

ASME SEC IV MA APP 5-2001 附录5.强制性

Boiler and Pressure Vessel.Appendix 5 - Mandatory Vacuum Boilers

Appendix 5 - Mandatory Vacuum Boilers

JB/T 8195.4-1999 间接电阻.ZC系列淬火

1.1 本标准规定了对ZC系列真空淬火炉产品的各项要求,包括品种规格、技术性能及其订购和供货等。 1.2 本标准适用于按4.1,5.1和5.2设计,主要用于金属材料在真空状态下进行气淬和油淬的卧式真空电阻炉。 1.3 真空炉的企业产品标准应按GB/T

Indirect resistance furnaces ZC series vacuum quenching furnaces

YB/T 4782-2019 自耗结晶器

Vacuum consumable furnace crystallizer

T/QGCML 2114-2023 锂电池干燥

本文件规定了锂电池真空干燥炉的术语和定义、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本文件适用于软包、圆柱、铝壳等类型锂离子电池使用的电池真空干燥炉,以下简称“干燥炉

Lithium battery vacuum drying oven

TP 86-2010 用测试沥青密封剂和填料加速老化的标准方法(修订版 1)

This method applies to bituminous crack sealants and fillers used in the construction and maintenance of roadways. The method covers the accelerated

Standard Method of Test for Accelerated Aging of Bituminous Sealants and Fillers with a Vacuum Oven (Revision 1)

JB/T 10551-2006 技术.感应熔炼

本标准规定了对真空感应熔炼炉(以下简称真空炉)的型式与基本参数、技术要求、试验方法、检验规则和标志、包装、运输、贮存及订货等。 本标准适用于频率大于60Hz小于等于104Hz下的真空感应熔炼炉,包括供熔炼、保温、升温、浇铸用的各种感应熔炼炉

Vacuum technology.Vacuum induction melting furnace

检测流程
填写并提交定制服务需求表
技术评估和方案讨论
对选定的试验方法进行报价
合同签定与付款
按期交付检测报告和相关数据
想了解更多检测项目
请点击咨询在线工程师
点击咨询
联系我们
服务热线:400-635-0567
地址:北京市丰台区南三环西路16号2号楼27层
邮编:10000
总机:400-635-0567
联系我们

服务热线:400-635-0567

投诉建议:010-82491398

报告问题解答:010-8646-0567-8

周期、价格等

咨询

技术咨询