钢闸门(平面、弧形、栏污栅)检测

BS 1722-9:2006(2011 栅栏 第9部分：圆形或方形垂直和扁平水平的低碳钢（低碳钢）栅栏规范

Fences – Part 9 : Specification for mild steel (low carbon steel) fences with round or square verticals and flat horizontals

CJ/T 3065-1997 弧形格栅除污机

Curved bar screens

BS 1722-9:2000 栅栏.带圆形或方形竖杆和扁平横杆的低碳钢栅栏规范

This part of BS 1722 specifies requirements for self-adjusting (nibbed) or welded mild steel (low carbon steel) fences with round or square verticals

Fences - Specification for mild steel (low carbon steel) fences with round or square verticals and flat horizontals

GB/T 14173-1993 平面钢闸门技术条件

本标准规定了平面钢闸门的术语分类、技术要求、检验规则、标志、包装、运输、贮存及质量保证。 本标准适用于水利、水电、航运及输水工程中的平面钢闸门及其埋件的制造与验收。有特殊制造要求时按合同或协议书执行

Specification for hydraulic flat steel gates

BS 1722-9:2006 栅栏.带圆形或方形竖杆和扁平横杆的低碳钢栅栏用规范

This part of BS 1722 specifies requirements for self-adjusting (nibbed) or welded mild steel (low carbon steel) fences with round or square

Fences - Specification for mild steel (low carbon steel) fences with round or square verticals and flat horizontals

CJ/T 492-2016 弧形格栅除污机

本标准规定了弧形格栅除污机(以下简称除污机)的术语和定义、型号、型式和基本参数、材料、工作条件、要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于给水排水工程中使用的弧形格栅除污机的制造和检验

Curved type bar screen machine

T/ZZB 0963-2019 潜孔压紧式弧形闸门

本标准规定了潜孔压紧式弧形闸门的基本要求、技术要求、试验方法、检验规则、标志、包装、运输和质量承诺。 本标准适用于水利水电工程和其他工程用潜孔压紧式弧形闸门（以下简称：闸门

Down hole pressed radial gate

BS 1722-12:1999 栅栏.钢栅栏规范

This part of BS 1722 specifies requirements for steel palisade fences and gates for general purposes (GP) in corrugated and angle pales for heights up

Fences - Specification for steel palisade fences

BS 17-9:2000 圆形或方形垂直和扁平水平的低碳钢（低碳钢）栅栏规范

Specification for mild steel ( low carbon steel ) fences with round or square verticals and flat horizontals

CGSB 138.4-96-CAN/CGSB-1996 链环栏栅门

La présente norme s'applique à un procédé pour déterminer par triage manuel la composition des mélanges de plumes et de duvet

Gates for Chain Link Fence

FCR COE RPMAS 32710-1977 栅栏和大门

FENCES AND GATES

CJ/T 3048-1995 平面格栅除污机

Plane bar screen waste remover

BS 1722-12:2006 栅栏.钢制栅栏用规范

This part of BS 1722 specifies requirements for steel palisade fences and gates for general purposes (“GP” fences) in corrugated and angle pales

Fences – Part 12: Specification for steel palisade fences

SL 37-1991 偏心铰弧形闸门技术条件

本技术条件适用于水利水电工程金属结构偏心铰弧形闸门制造及验收

Technical conditions for eccentric hinge radial gate

BS 1722-8:2006(2011 栅栏 - 第8部分：低碳钢（低碳钢）连续栅栏和栅栏规范

Fences – Part 8 : Specification for mild steel (low carbon steel) continuous bar fences and hurdles

BS 1722-9:2006(2011 栅栏 第9部分：圆形或方形垂直和扁平水平的低碳钢（低碳钢）栅栏规范

Fences – Part 9 : Specification for mild steel (low carbon steel) fences with round or square verticals and flat horizontals

CJ/T 3065-1997 弧形格栅除污机

Curved bar screens

BS 1722-9:2000 栅栏.带圆形或方形竖杆和扁平横杆的低碳钢栅栏规范

This part of BS 1722 specifies requirements for self-adjusting (nibbed) or welded mild steel (low carbon steel) fences with round or square verticals

Fences - Specification for mild steel (low carbon steel) fences with round or square verticals and flat horizontals

GB/T 14173-1993 平面钢闸门技术条件

本标准规定了平面钢闸门的术语分类、技术要求、检验规则、标志、包装、运输、贮存及质量保证。 本标准适用于水利、水电、航运及输水工程中的平面钢闸门及其埋件的制造与验收。有特殊制造要求时按合同或协议书执行

Specification for hydraulic flat steel gates

BS 1722-9:2006 栅栏.带圆形或方形竖杆和扁平横杆的低碳钢栅栏用规范

This part of BS 1722 specifies requirements for self-adjusting (nibbed) or welded mild steel (low carbon steel) fences with round or square

Fences - Specification for mild steel (low carbon steel) fences with round or square verticals and flat horizontals

CJ/T 492-2016 弧形格栅除污机

本标准规定了弧形格栅除污机(以下简称除污机)的术语和定义、型号、型式和基本参数、材料、工作条件、要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于给水排水工程中使用的弧形格栅除污机的制造和检验

Curved type bar screen machine

T/ZZB 0963-2019 潜孔压紧式弧形闸门

本标准规定了潜孔压紧式弧形闸门的基本要求、技术要求、试验方法、检验规则、标志、包装、运输和质量承诺。 本标准适用于水利水电工程和其他工程用潜孔压紧式弧形闸门（以下简称：闸门

Down hole pressed radial gate

BS 1722-12:1999 栅栏.钢栅栏规范

This part of BS 1722 specifies requirements for steel palisade fences and gates for general purposes (GP) in corrugated and angle pales for heights up

Fences - Specification for steel palisade fences

BS 17-9:2000 圆形或方形垂直和扁平水平的低碳钢（低碳钢）栅栏规范

Specification for mild steel ( low carbon steel ) fences with round or square verticals and flat horizontals

CGSB 138.4-96-CAN/CGSB-1996 链环栏栅门

La présente norme s'applique à un procédé pour déterminer par triage manuel la composition des mélanges de plumes et de duvet

Gates for Chain Link Fence

FCR COE RPMAS 32710-1977 栅栏和大门

FENCES AND GATES

CJ/T 3048-1995 平面格栅除污机

Plane bar screen waste remover

BS 1722-12:2006 栅栏.钢制栅栏用规范

This part of BS 1722 specifies requirements for steel palisade fences and gates for general purposes (“GP” fences) in corrugated and angle pales

Fences – Part 12: Specification for steel palisade fences

SL 37-1991 偏心铰弧形闸门技术条件

本技术条件适用于水利水电工程金属结构偏心铰弧形闸门制造及验收

Technical conditions for eccentric hinge radial gate

BS 1722-8:2006(2011 栅栏 - 第8部分：低碳钢（低碳钢）连续栅栏和栅栏规范

Fences – Part 8 : Specification for mild steel (low carbon steel) continuous bar fences and hurdles