泵的振动检测

GB/T 29531-2013 泵的振动测量与评价方法

本标准规定了在泵的非旋转部件表面进行的振动测量、测量仪器及泵的振动评价方法。 /mi /mi /mi 本标准适用于转速为600r n~12000r n(小于600r n 可参照使用)的各种型式泵,泵与电动机共轴(或泵轴与电机轴采用刚性联轴器连接)的泵机组。 本标准不适用于潜液泵、往复式容积泵和内燃机

Methods of measuring and evaluating vibration of pumps

JB/T 8097-1999 泵的振动测量与评价方法

本标准规定了在泵的非旋转部件表面进行振动测量与评价方法。 本标准适用于除潜液泵、往复泵以外的各种型式泵和泵用调速液力偶合器，转速一般为

Methods of measuring and evaluating vibration of pumps

ANSI/HI 9.6.4-2009 旋转动力泵的振动测量和容许值

This standard applies to the evaluation of vibration on rotodynamic pump applications absorbing more than 2 kw (3 hp) and of the types as indicated

Rotodynamic Pumps for Vibration Measurements and Allowable Values

VDI 3839 Blatt 7-2012 测量和解释机器振动的说明 离心泵的典型振动模式

The guideline provides an overview of the specific vibration problems at pumps with nominal power over 1 KW, which is used in plants and devices

Instructions on measuring and interpreting the vibration of machines - Typical vibration patterns with centrifugal pumps

VDI 3839 Blatt 7-2010 测量和解释机器振动的注意事项 泵的典型振动模式

Instructions on measuring and interpreting the vibration of machines - Typical vibration patterns with centrifugal pumps

NF E44-165:2011 工业泵.离心泵、混流泵和轴流泵.允许的机械振动级

Industrial pumps - Centrifugal, mixed flow and axial pumps - Allowable level for mechanical vibrations.

NF E44-165:1990 工业泵.离心泵、混流泵和轴流泵.允许的机械振动级

Industrial pumps. Centrifugal, mixed flow and axial pumps. Allowable level for mechanical vibrations.

NBN-EN 60994-1993 水力机械（水轮机，蓄水泵和水轮泵）振动和脉动的现场测量指南

Guide for field measurement of vibrations and pulsations in hydraulic machines (turbines, storage pumps and pump-turbines)

NF C55-420*NF EN 60994:1993 液压机械（涡轮、蓄水泵和水泵-水轮机）的振动和脉动的现场测量指南

Guide for field measurement of vibrations and pulsations in hydraulic machines (turbines, storga pumps and pump-turbines).

GB/T 31305-2014 水族箱用及类似用途的电磁振动式气泵

本标准规定了水族箱用及类似用途电磁振动式气泵的术语和定义、分类与型号命名、要求、试验方法、检验规则、标志、包装、运输和贮存等。本标准适用于额定电压交流不超过250V、直流不超过400V,额定电流不超过16A的电磁振动式气泵(以下简称“气泵”);主要用于在水族箱及水产养殖场中增加水的氧气量,也可用于需

Electromagnetic vibration air pump for aquariums and similar application

GB/T 32584-2016 水力发电厂和蓄能泵站机组机械振动的评定

本标准规定了水力发电厂和蓄能泵站机组机械振动的测量方法和评价准则，适用于水力发电厂和蓄能泵站机组正常运行范围内机械振动的评定。 本标准规定了两种机械振动的评价准则，一是利用测量的振动幅值进行评价；二是利用测量的振动幅值相对于振动基准值的变化量进行评价。 本标准适用于水力发电厂和蓄能泵站机组，其

Evaluation of mechanical vibration for machine sets in hydraulic power plants and pump-storage plants

KS B IEC 60994:2021 水力机械（涡轮机、蓄能泵和水泵涡轮机）振动和脉动的现场测量指南

Guide for field measurement of vibrations and pulsations in hydraulic machines(turbines, storage pumps and pump-turbines)

KS B IEC 60994-2021 水力机械（涡轮机、蓄能泵和水泵涡轮机）振动和脉动的现场测量指南

Guide for field measurement of vibrations and pulsations in hydraulic machines(turbines, storage pumps and pump-turbines)

KS B IEC 60994-2006(2016 液压机（涡轮机 储存泵和泵用涡轮机）振动和脉动的现场测量指南

Guide for field measurement of vibrations and pulsations in hydraulic machines(turbines, storage pumps and pump-turbines)

GOST 32106-2013 机器状态监测和诊断. 危险设备监控. 叶片泵和压缩机产生的振动

Condition monitoring and diagnostics of machines. Hazardous equipment monitoring. Vibration generated by rotodynamic pump and compressor units

GB/T 29531-2013 泵的振动测量与评价方法

本标准规定了在泵的非旋转部件表面进行的振动测量、测量仪器及泵的振动评价方法。 /mi /mi /mi 本标准适用于转速为600r n~12000r n(小于600r n 可参照使用)的各种型式泵,泵与电动机共轴(或泵轴与电机轴采用刚性联轴器连接)的泵机组。 本标准不适用于潜液泵、往复式容积泵和内燃机

Methods of measuring and evaluating vibration of pumps

JB/T 8097-1999 泵的振动测量与评价方法

本标准规定了在泵的非旋转部件表面进行振动测量与评价方法。 本标准适用于除潜液泵、往复泵以外的各种型式泵和泵用调速液力偶合器，转速一般为

Methods of measuring and evaluating vibration of pumps

ANSI/HI 9.6.4-2009 旋转动力泵的振动测量和容许值

This standard applies to the evaluation of vibration on rotodynamic pump applications absorbing more than 2 kw (3 hp) and of the types as indicated

Rotodynamic Pumps for Vibration Measurements and Allowable Values

VDI 3839 Blatt 7-2012 测量和解释机器振动的说明 离心泵的典型振动模式

The guideline provides an overview of the specific vibration problems at pumps with nominal power over 1 KW, which is used in plants and devices

Instructions on measuring and interpreting the vibration of machines - Typical vibration patterns with centrifugal pumps

VDI 3839 Blatt 7-2010 测量和解释机器振动的注意事项 泵的典型振动模式

Instructions on measuring and interpreting the vibration of machines - Typical vibration patterns with centrifugal pumps

NF E44-165:2011 工业泵.离心泵、混流泵和轴流泵.允许的机械振动级

Industrial pumps - Centrifugal, mixed flow and axial pumps - Allowable level for mechanical vibrations.

NF E44-165:1990 工业泵.离心泵、混流泵和轴流泵.允许的机械振动级

Industrial pumps. Centrifugal, mixed flow and axial pumps. Allowable level for mechanical vibrations.

NBN-EN 60994-1993 水力机械（水轮机，蓄水泵和水轮泵）振动和脉动的现场测量指南

Guide for field measurement of vibrations and pulsations in hydraulic machines (turbines, storage pumps and pump-turbines)

NF C55-420*NF EN 60994:1993 液压机械（涡轮、蓄水泵和水泵-水轮机）的振动和脉动的现场测量指南

Guide for field measurement of vibrations and pulsations in hydraulic machines (turbines, storga pumps and pump-turbines).

GB/T 31305-2014 水族箱用及类似用途的电磁振动式气泵

本标准规定了水族箱用及类似用途电磁振动式气泵的术语和定义、分类与型号命名、要求、试验方法、检验规则、标志、包装、运输和贮存等。本标准适用于额定电压交流不超过250V、直流不超过400V,额定电流不超过16A的电磁振动式气泵(以下简称“气泵”);主要用于在水族箱及水产养殖场中增加水的氧气量,也可用于需

Electromagnetic vibration air pump for aquariums and similar application

GB/T 32584-2016 水力发电厂和蓄能泵站机组机械振动的评定

本标准规定了水力发电厂和蓄能泵站机组机械振动的测量方法和评价准则，适用于水力发电厂和蓄能泵站机组正常运行范围内机械振动的评定。 本标准规定了两种机械振动的评价准则，一是利用测量的振动幅值进行评价；二是利用测量的振动幅值相对于振动基准值的变化量进行评价。 本标准适用于水力发电厂和蓄能泵站机组，其

Evaluation of mechanical vibration for machine sets in hydraulic power plants and pump-storage plants

KS B IEC 60994:2021 水力机械（涡轮机、蓄能泵和水泵涡轮机）振动和脉动的现场测量指南

Guide for field measurement of vibrations and pulsations in hydraulic machines(turbines, storage pumps and pump-turbines)

KS B IEC 60994-2021 水力机械（涡轮机、蓄能泵和水泵涡轮机）振动和脉动的现场测量指南

Guide for field measurement of vibrations and pulsations in hydraulic machines(turbines, storage pumps and pump-turbines)

KS B IEC 60994-2006(2016 液压机（涡轮机 储存泵和泵用涡轮机）振动和脉动的现场测量指南

Guide for field measurement of vibrations and pulsations in hydraulic machines(turbines, storage pumps and pump-turbines)

GOST 32106-2013 机器状态监测和诊断. 危险设备监控. 叶片泵和压缩机产生的振动

Condition monitoring and diagnostics of machines. Hazardous equipment monitoring. Vibration generated by rotodynamic pump and compressor units