干密封管螺纹校对用量规检测

JB/T 10031-1999 用螺纹密封的管螺纹量规

本标准规定了用螺纹密封的管螺纹量规的名称，代号，尺寸，公差，检验方法和标志与包装。 本标准适用于检验 GB/T 7306-1987《用螺纹密封的管螺纹》所规定的圆锥螺纹和圆柱内螺纹的尺寸

Gauges for pipe threads where pressure-tight joints are made on the threads

SAE J476A-1961 干密封管螺纹

The Dryseal American Standard Taper Pipe Thread, the Dryseal American fuel Internal Straight Pipe Thread and the Dryseal American intermediate

Dryseal Pipe Threads

SAE J476-2013 干密封管螺纹

This document has been declared ""Stabilized"" and will no longer be subjected to periodic reviews for currency. Users are responsible for verifying

Dryseal Pipe Threads

SAE J476-1961 干密封管螺纹

The Dryseal American Standard Taper Pipe Thread, the Dryseal American Fuel Internal Straight Pipe Thread and the Dryseal American Intermediate

Dryseal Pipe Threads

GM GMX200-1988 干密封管螺纹

Dryseal Pipe Threads

GB/T 27944-2011 60°干密封管螺纹

本标准规定了6O。 干密封管螺纹的牙型、基本尺寸、公差、标记和量规。 本标准适用于对螺纹密封性能有较高要求的管子、阀门、管接头及宴他管路附件的螺纹连接

Dryseal pipe threads with the thread angle of 60 degrees

ASME B1.20.5-1991(R2019 干密封管螺纹量具-英制

ASME B1.20.5 provides specifications & dimensions for Dryseal Pipe Thread gages (e.g. master ring, plug

Gaging for Dryseal Pipe Threads-Inch

ANSI/ASME B1.20.5-1991 干密封管螺纹的测量(英制)

Provides information regarding practical dry seal thread inspection methods and commonly used gages for production evaluation purposes. All dimensions

Gaging for Dryseal Pipe Threads (Inch)

ASME B1.20.3-1976(R2023 干密封管螺纹 英制

Dryseal pipe threads are based on the USA (American) pipe thread, however, they differ from the USA (American) pipe thread in that they are designed

Dryseal Pipe Threads,Inch

GB/T 10922-2006 55°非密封管螺纹量规

本标准规定了55°非密封管螺纹量规的公差、要求、验收及检验、标志与包装等。 本标准规定的螺纹量规适用于检验GB/T 7307-2001规定的55°非密封管螺纹

Gauges for pipe threads with 55 degree thread angle where pressure-tight joints are not made on the threads

JB/T 10031-2019 55°密封管螺纹量规

55° Sealing Pipe Thread Gauge

JBT10031-2019 55°密封管螺纹量规

55° Sealing Pipe Thread Gauge

GM 9985473-2005 干膜螺纹密封

Unbesdiaoet etwaiger durch oen Abnehmer erfolgenden StimprobenprÜiungen trag: de: Lieferant die Verantwortung oafür, oafi oie gelieferte Wore oie Ope1

Preapplied Thread Sealer Revision C

ONORM ISO 228 Teil.2:1984 非螺纹密封的管螺纹．限制量规确认

Diese Internationale Norm legt das Prüfen zylindrischer Gewinde mit Grenzlehren fest. Die Gewindema?e und Toleranzen sind in ISO 228/1 (siehe ?NORM

Pipe threads where pressure-tight joints are not made on the threads; Verification by means of limit gauges

BS EN ISO 228-2:2003 非螺纹密封连接的管螺纹.用极限量规检验

This part of IS0 228 specifies the verification, by means of limit gauges, of cylindrical threads, the dimensions and tolerances of which are given

Pipe threads where pressure-tight joints are not made on the threads - Verification by means of limit gauges

JB/T 10031-1999 用螺纹密封的管螺纹量规

本标准规定了用螺纹密封的管螺纹量规的名称，代号，尺寸，公差，检验方法和标志与包装。 本标准适用于检验 GB/T 7306-1987《用螺纹密封的管螺纹》所规定的圆锥螺纹和圆柱内螺纹的尺寸

Gauges for pipe threads where pressure-tight joints are made on the threads

SAE J476A-1961 干密封管螺纹

The Dryseal American Standard Taper Pipe Thread, the Dryseal American fuel Internal Straight Pipe Thread and the Dryseal American intermediate

Dryseal Pipe Threads

SAE J476-2013 干密封管螺纹

This document has been declared ""Stabilized"" and will no longer be subjected to periodic reviews for currency. Users are responsible for verifying

Dryseal Pipe Threads

SAE J476-1961 干密封管螺纹

The Dryseal American Standard Taper Pipe Thread, the Dryseal American Fuel Internal Straight Pipe Thread and the Dryseal American Intermediate

Dryseal Pipe Threads

GM GMX200-1988 干密封管螺纹

Dryseal Pipe Threads

GB/T 27944-2011 60°干密封管螺纹

本标准规定了6O。 干密封管螺纹的牙型、基本尺寸、公差、标记和量规。 本标准适用于对螺纹密封性能有较高要求的管子、阀门、管接头及宴他管路附件的螺纹连接

Dryseal pipe threads with the thread angle of 60 degrees

ASME B1.20.5-1991(R2019 干密封管螺纹量具-英制

ASME B1.20.5 provides specifications & dimensions for Dryseal Pipe Thread gages (e.g. master ring, plug

Gaging for Dryseal Pipe Threads-Inch

ANSI/ASME B1.20.5-1991 干密封管螺纹的测量(英制)

Provides information regarding practical dry seal thread inspection methods and commonly used gages for production evaluation purposes. All dimensions

Gaging for Dryseal Pipe Threads (Inch)

ASME B1.20.3-1976(R2023 干密封管螺纹 英制

Dryseal pipe threads are based on the USA (American) pipe thread, however, they differ from the USA (American) pipe thread in that they are designed

Dryseal Pipe Threads,Inch

GB/T 10922-2006 55°非密封管螺纹量规

本标准规定了55°非密封管螺纹量规的公差、要求、验收及检验、标志与包装等。 本标准规定的螺纹量规适用于检验GB/T 7307-2001规定的55°非密封管螺纹

Gauges for pipe threads with 55 degree thread angle where pressure-tight joints are not made on the threads

JB/T 10031-2019 55°密封管螺纹量规

55° Sealing Pipe Thread Gauge

JBT10031-2019 55°密封管螺纹量规

55° Sealing Pipe Thread Gauge

GM 9985473-2005 干膜螺纹密封

Unbesdiaoet etwaiger durch oen Abnehmer erfolgenden StimprobenprÜiungen trag: de: Lieferant die Verantwortung oafür, oafi oie gelieferte Wore oie Ope1

Preapplied Thread Sealer Revision C

ONORM ISO 228 Teil.2:1984 非螺纹密封的管螺纹．限制量规确认

Diese Internationale Norm legt das Prüfen zylindrischer Gewinde mit Grenzlehren fest. Die Gewindema?e und Toleranzen sind in ISO 228/1 (siehe ?NORM

Pipe threads where pressure-tight joints are not made on the threads; Verification by means of limit gauges

BS EN ISO 228-2:2003 非螺纹密封连接的管螺纹.用极限量规检验

This part of IS0 228 specifies the verification, by means of limit gauges, of cylindrical threads, the dimensions and tolerances of which are given

Pipe threads where pressure-tight joints are not made on the threads - Verification by means of limit gauges