LED光引擎和LED灯检测

IESNA LM-82-2012 批准的方法：表征 LED 光引擎和 LED 灯的电气和光度特性随温度的变化

Approved Method: Characterization of LED Light Engines and LED Lamps for Electrical and Photometric Properties as a Function of Temperature

NEMA LSD 68-2013 LED 灯 引擎和灯具中使用的远程荧光设备

The aim of this paper is to facilitate development of testing and certification procedures that will allow the qualification of pump or source

Remote Phosphor Devices Used in LED Lamps@ Engines and Luminaires

CIE 235:2019 LED 模块和光引擎的光学测量

  Full Description LED modules and light engines represent a wide range of very different products with unique physical

Optical Measurement of LED Modules and Light Engines

IESNA LM-84-2014 用于测量 LED 灯、光引擎和灯具的光通量和颜色维护的批准方法

Approved Method for Measuring Luminous Flux and Color Maintenance of LED Lamps, Light Engines, and Luminaires

CAN/ULC-S8753-2013 现场可更换发光二极管 (LED) 光引擎标准

1 Scope 1.1 This standard specifies the requirements applicable to field replaceable light-emitting diode (LED) light engines rated up to 347

Standard for Field-Replaceable Light Emitting Diode (LED) Light Engines

CAN/ULC S8753-2013 现场可更换发光二极管 (LED) 光引擎标准

  Full Description This standard specifies the requirements applicable to field replaceable light-emitting diode (LED) light

Standard for Field-Replaceable Light Emitting Diode (LED) Light Engines

JIS C 8152-2:2019 普通照明用白光发光二极管的光度测定 第2部分：LED模块和LED光引擎

  Full Description JIS C 8152-2:2019 specifies the methods for obtaining the total luminous flux and the quantities concerning

Photometry of white light emitting diode for general lighting -- Part 2: LED modules and LED light engines

DB44/T 1161-2013 LED投光灯

本标准规定了LED投光灯的术语和定义、结构、分类与命名、技术要求、试验方法、检验规则、标志、包装、合格证、使用说明书、运输和贮存。 本标准适用于250 V以下直流电源或1 000 V以下交流供电以LED为光源的用于投光照明（泛光照明）的投光设备，将光线投射到整个面或场所，使得受照面的照度远大于其

LED flood light

GB/T 39394-2020 LED灯、LED灯具和LED模块的测试方法

本标准规定了由交流或直流供电并可能配置LED控制装置的LED灯、LED灯具和LED模块的电学、光度和色度参数的测量方法。LED光引擎类似于LED模块,可参照执行。本标准中所覆盖的光度和色度参数包括总光通量、光效、部分光通量、光强分布、中心光束强度、亮度和亮度分布、色品坐标、相关色温(CCT

Test method for LED lamps, LED luminaires and LED modules

T/NHLSAN 6-2019 LED投光灯

LED投光灯主要技术内容是：环境要求、安全、外观、电镀和化学覆盖层、光电性能（功率、功率因数、标称照度、色品容差、初始光通量、初始主波长、初始光效、色温、光束角）、寿命（平均寿命、光通维持率、开关次数）、光生物安全、振动、电磁兼容性

LED Floodlights

T/NHLSAN 2-2018 《LED日光灯》

本标准规定了使用G5和G13灯头的普通照明用LED日光灯的术语和定义、分类和命名、要求、试验方法、检验规则及标志、包装、运输和贮存。 主要技术内容包括：1、环境适应性  2、外观  3、外形尺寸  4、光电性能（初始光通量、初始光效、功率

《LED Fluorescent Lamp》

DB43/T 681-2012 LED日光灯

LED fluorescent lamp

UL 8753-2018 UL 安全现场可更换发光二极管（LED）光引擎标准

UL Standard for Safety Field-Replaceable Light Emitting Diode (LED) Light Engines

UL 8753 BULLETIN-2013 UL 安全现场可更换发光二极管（LED）光引擎标准

UL Standard for Safety Field-Replaceable Light Emitting Diode (LED) Light Engines

ULC 8753-2024 现场可更换发光二极管 (LED) 光引擎标准 (CAN/ULC S8753)

  Full Description This standard specifies the requirements applicable to holders, bases and connectors intended for solid-state

Standard for Field-Replaceable Light Emitting Diode (LED) Light Engines (CAN/ULC S8753)

标准专题 led 灯光

IESNA LM-82-2012 批准的方法：表征 LED 光引擎和 LED 灯的电气和光度特性随温度的变化

Approved Method: Characterization of LED Light Engines and LED Lamps for Electrical and Photometric Properties as a Function of Temperature

NEMA LSD 68-2013 LED 灯 引擎和灯具中使用的远程荧光设备

The aim of this paper is to facilitate development of testing and certification procedures that will allow the qualification of pump or source

Remote Phosphor Devices Used in LED Lamps@ Engines and Luminaires

CIE 235:2019 LED 模块和光引擎的光学测量

  Full Description LED modules and light engines represent a wide range of very different products with unique physical

Optical Measurement of LED Modules and Light Engines

IESNA LM-84-2014 用于测量 LED 灯、光引擎和灯具的光通量和颜色维护的批准方法

Approved Method for Measuring Luminous Flux and Color Maintenance of LED Lamps, Light Engines, and Luminaires

CAN/ULC-S8753-2013 现场可更换发光二极管 (LED) 光引擎标准

1 Scope 1.1 This standard specifies the requirements applicable to field replaceable light-emitting diode (LED) light engines rated up to 347

Standard for Field-Replaceable Light Emitting Diode (LED) Light Engines

CAN/ULC S8753-2013 现场可更换发光二极管 (LED) 光引擎标准

  Full Description This standard specifies the requirements applicable to field replaceable light-emitting diode (LED) light

Standard for Field-Replaceable Light Emitting Diode (LED) Light Engines

JIS C 8152-2:2019 普通照明用白光发光二极管的光度测定 第2部分：LED模块和LED光引擎

  Full Description JIS C 8152-2:2019 specifies the methods for obtaining the total luminous flux and the quantities concerning

Photometry of white light emitting diode for general lighting -- Part 2: LED modules and LED light engines

DB44/T 1161-2013 LED投光灯

本标准规定了LED投光灯的术语和定义、结构、分类与命名、技术要求、试验方法、检验规则、标志、包装、合格证、使用说明书、运输和贮存。 本标准适用于250 V以下直流电源或1 000 V以下交流供电以LED为光源的用于投光照明（泛光照明）的投光设备，将光线投射到整个面或场所，使得受照面的照度远大于其

LED flood light

GB/T 39394-2020 LED灯、LED灯具和LED模块的测试方法

本标准规定了由交流或直流供电并可能配置LED控制装置的LED灯、LED灯具和LED模块的电学、光度和色度参数的测量方法。LED光引擎类似于LED模块,可参照执行。本标准中所覆盖的光度和色度参数包括总光通量、光效、部分光通量、光强分布、中心光束强度、亮度和亮度分布、色品坐标、相关色温(CCT

Test method for LED lamps, LED luminaires and LED modules

T/NHLSAN 6-2019 LED投光灯

LED投光灯主要技术内容是：环境要求、安全、外观、电镀和化学覆盖层、光电性能（功率、功率因数、标称照度、色品容差、初始光通量、初始主波长、初始光效、色温、光束角）、寿命（平均寿命、光通维持率、开关次数）、光生物安全、振动、电磁兼容性

LED Floodlights

T/NHLSAN 2-2018 《LED日光灯》

本标准规定了使用G5和G13灯头的普通照明用LED日光灯的术语和定义、分类和命名、要求、试验方法、检验规则及标志、包装、运输和贮存。 主要技术内容包括：1、环境适应性  2、外观  3、外形尺寸  4、光电性能（初始光通量、初始光效、功率

《LED Fluorescent Lamp》

DB43/T 681-2012 LED日光灯

LED fluorescent lamp

UL 8753-2018 UL 安全现场可更换发光二极管（LED）光引擎标准

UL Standard for Safety Field-Replaceable Light Emitting Diode (LED) Light Engines

UL 8753 BULLETIN-2013 UL 安全现场可更换发光二极管（LED）光引擎标准

UL Standard for Safety Field-Replaceable Light Emitting Diode (LED) Light Engines

ULC 8753-2024 现场可更换发光二极管 (LED) 光引擎标准 (CAN/ULC S8753)

  Full Description This standard specifies the requirements applicable to holders, bases and connectors intended for solid-state

Standard for Field-Replaceable Light Emitting Diode (LED) Light Engines (CAN/ULC S8753)

标准专题 led 灯光