卫生设备用冷热混合水龙头检测

DS/EN 200:1994 卫生设备管件．单用水龙头和冷热水混合水龙头（标称尺寸为1/2）的一般技术规范．最小水流压力为0.05 Mpa（0.5巴）

Denne standard fastl?gger - krav til dimensioner, t?thed, tryk, hydrauliske egenska-ber, mekanisk styrke, mekanisk levetid samt akustiske egenskaber

Sanitary tapware-General technical specifications for single taps and mixer taps (nominal size 1/2) PN 10-Minimum flow pressure of 0,05 MPa(0,5 bar)

LST EN 15091-2014 卫生设备用水龙头. 电动开关的卫生水龙头设备

Sanitary tapware - Electronic opening and closing sanitary tapware

BS EN 15091:2013 卫生设备水龙头.电子开关卫生设备水龙头

Sanitary tapware. Electronic opening and closing sanitary tapware

CNS 8088-2006 冷热混合水龙头

本标准适用于铜制给水系列之冷热混合水龙头，水温在常温以上100℃以下，最高使用压力为10 kgf/cm2者

Combination faucets

CNS 8088-1996 冷热混合水龙头

Combination Faucets

NF D18-219:2007 卫生水龙头设备.电动开关的卫生水龙头设备

Sanitary tapware - Electronic opening and closing sanitary tapware.

NBN 826-1970 卫生设备．龙头/开关 隐藏式混合型龙头

Sanitary equipment. Faucet/Switch Concealed Mixer Faucet

SFS 2644-1971 水管设施 墙壁冷热水混合龙头

Plumbing wall hot and cold water mixer faucet

NBN 839-1970 卫生设备，表面成对的混合龙头

Sanitary equipment, surface paired mixer taps

BS EN 817:1998 卫生设备用水龙头.机械混合器(PN10).一般技术规范

This European Standard specifies: - the dimensional, leaktightness, mechanical and hydraulic performance, mechanical endurance and acoustic

Sanitary tapware - Mechanical mixers (PN 10) - General technical specifications

NF D18-214*NF EN 817:2008 卫生设备用水龙头 机械混合器（PN10）一般技术规范

Sanitary tapware - Mechanical mixers valves (PN 10) - General technical specifications

SANS 1480:2005 单独控制冷热水混合龙头

Covers mixer taps (mixers) that are manually operated by means of a single control having a separate and independent mode of operation for controlling

Single control mixer taps

BS EN 15091:2007 卫生用水龙头 电动开关卫生用水龙头

Sanitary tapware. Electronic opening and closing sanitary tapware

BS EN 15091:2006 卫生用水龙头.电动开关卫生用水龙头

The purpose of the document is to define requirements for marking, identification, leaktightness, electrical and operational safety and mechanical

Sanitary tapware - Electronic opening and closing sanitary tapware

BS EN 1113:2008+A1:2011 卫生设备水龙头.1型和2型供水系统用卫生设备水龙头的淋浴喷头.通用技术规范

This European Standard specifies:  the dimensional, leaktightness, mechanical and hydraulic characteristics with which shower hoses shall comply

Sanitary tapware. Shower hoses for sanitary tapware for water supply systems of type 1 and type 2. General technical specification

DS/EN 200:1994 卫生设备管件．单用水龙头和冷热水混合水龙头（标称尺寸为1/2）的一般技术规范．最小水流压力为0.05 Mpa（0.5巴）

Denne standard fastl?gger - krav til dimensioner, t?thed, tryk, hydrauliske egenska-ber, mekanisk styrke, mekanisk levetid samt akustiske egenskaber

Sanitary tapware-General technical specifications for single taps and mixer taps (nominal size 1/2) PN 10-Minimum flow pressure of 0,05 MPa(0,5 bar)

LST EN 15091-2014 卫生设备用水龙头. 电动开关的卫生水龙头设备

Sanitary tapware - Electronic opening and closing sanitary tapware

BS EN 15091:2013 卫生设备水龙头.电子开关卫生设备水龙头

Sanitary tapware. Electronic opening and closing sanitary tapware

CNS 8088-2006 冷热混合水龙头

本标准适用于铜制给水系列之冷热混合水龙头，水温在常温以上100℃以下，最高使用压力为10 kgf/cm2者

Combination faucets

CNS 8088-1996 冷热混合水龙头

Combination Faucets

NF D18-219:2007 卫生水龙头设备.电动开关的卫生水龙头设备

Sanitary tapware - Electronic opening and closing sanitary tapware.

NBN 826-1970 卫生设备．龙头/开关 隐藏式混合型龙头

Sanitary equipment. Faucet/Switch Concealed Mixer Faucet

SFS 2644-1971 水管设施 墙壁冷热水混合龙头

Plumbing wall hot and cold water mixer faucet

NBN 839-1970 卫生设备，表面成对的混合龙头

Sanitary equipment, surface paired mixer taps

BS EN 817:1998 卫生设备用水龙头.机械混合器(PN10).一般技术规范

This European Standard specifies: - the dimensional, leaktightness, mechanical and hydraulic performance, mechanical endurance and acoustic

Sanitary tapware - Mechanical mixers (PN 10) - General technical specifications

NF D18-214*NF EN 817:2008 卫生设备用水龙头 机械混合器（PN10）一般技术规范

Sanitary tapware - Mechanical mixers valves (PN 10) - General technical specifications

SANS 1480:2005 单独控制冷热水混合龙头

Covers mixer taps (mixers) that are manually operated by means of a single control having a separate and independent mode of operation for controlling

Single control mixer taps

BS EN 15091:2007 卫生用水龙头 电动开关卫生用水龙头

Sanitary tapware. Electronic opening and closing sanitary tapware

BS EN 15091:2006 卫生用水龙头.电动开关卫生用水龙头

The purpose of the document is to define requirements for marking, identification, leaktightness, electrical and operational safety and mechanical

Sanitary tapware - Electronic opening and closing sanitary tapware

BS EN 1113:2008+A1:2011 卫生设备水龙头.1型和2型供水系统用卫生设备水龙头的淋浴喷头.通用技术规范

This European Standard specifies:  the dimensional, leaktightness, mechanical and hydraulic characteristics with which shower hoses shall comply

Sanitary tapware. Shower hoses for sanitary tapware for water supply systems of type 1 and type 2. General technical specification