切变模量检测

TS 2859-1977 硫化橡胶．切变模量测定．四面剪力法

RUBBER, VULCANIZED - DETERMINATION OF MODULUS IN SHEAR - QUADRUPLE SHEAR METHOD

GB/T 2105-1991 金属材料杨氏模量、切变模量及泊松比测量方法(动力学法) 已作废

本标准规定了金属材料杨氏模量、切变模量及泊松比动力学测量方汉的术语定义、测量原理、测量 器具、变温装置、试样、测试条件与操作、数据处理、检测精度及试验报告的要坟。 本标准适用于-195～1200℃间材质均匀的金属材料的动态杨氏模量、动态切变模量及动态泊松比的测量。 除金属材料

Metallic material--Standard test method for the Young's modulus,Shear modulus and Poison's ratio (Dynamic method)

FORD WSK-M2G379-A6-2008 聚氨酯胶粘剂,暖应用环境可泵运低传导快速修复一组分高切变模量(和FORD WSS-M99P1111-A一起使用)在文件FORD WSK-M2G379-A1上

ADHESIVE, POLYURETHANE, ONE COMPONENT, HIGH SHEAR MODULUS, FAST FIX, LOW-CONDUCTIVE, AMBIENT PUMPABLE, WARM APPLIED ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on FORD WSK-M2G379-A1

FORD WSS-M2G316-B6-2009 中温施涂的可在环境温度条件下泵送的低导电性快速安装型高切变模量单组分聚氨酯胶粘剂***与标准FORD WSS-M99P1111-A一起使用***

ADHESIVE, POLYURETHANE, ONE COMPONENT, HIGH SHEAR MODULUS, FAST FIX, LOW-CONDUCTIVE, AMBIENT PUMPABLE, WARM APPLIED ***TO BE USED WITH FORD WSS-M99P1111-A***

FORD WSK-M2G379-A1-2009 中温施涂的可在环境温度条件下泵送的低导电性快速安装型高切变模量单组分聚氨酯胶粘剂***与标准FORD WSS-M99P1111-A一起使用***

ADHESIVE, POLYURETHANE, ONE COMPONENT, HIGH SHEAR MODULUS, FAST FIX, LOW-CONDUCTIVE, AMBIENT PUMPABLE, WARM APPLIED ***TO BE USED WITH FORD WSS-M99P1111-A***

FORD WSK-M2G379-A6-2009 中温施涂的可在环境温度条件下泵送的低导电性快速安装型高切变模量单组分聚氨酯胶粘剂***与标准FORD WSS-M99P1111-A一起使用***列于标准FORD WSK-M2G379-A1上［使用:FORD WSS-M2G316-B6,FORD WSS-M2G316-B6］

ADHESIVE, POLYURETHANE, ONE COMPONENT, HIGH SHEAR MODULUS, FAST FIX, LOW-CONDUCTIVE, AMBIENT PUMPABLE, WARM APPLIED ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSK-M2G379-A1)

ASTM D7312-07 采用超级铺面剪切试验器(SST)测定沥青混合物的永久剪切应变和复数切变模量用标准试验方法

The test procedures and associated analysis techniques described in this method can be used to determine complex shear modulus

Standard Test Method for Determining the Permanent Shear Strain and Complex Shear Modulus of Asphalt Mixtures Using the Superpave Shear Tester (SST)

ASTM D7312-10 采用超级铺面剪切试验器(SST)测定沥青混合物的永久剪切应变和复数切变模量用标准试验方法

The test procedures and associated analysis techniques described in this method can be used to determine complex shear modulus and permanent shear

Standard Test Method for Determining the Permanent Shear Strain and Complex Shear Modulus of Asphalt Mixtures Using the Superpave Shear Tester (SST)

ASTM D7552-09 使用动力剪切流变仪测定沥青混合料的复数切变模量(G*)的标准试验方法

The complex shear modulus of bituminous mixtures is a fundamental property of the material. Test results at critical temperatures (T_critical

Standard Test Method for Determining the Complex Shear Modulus (G*) Of Bituminous Mixtures Using Dynamic Shear Rheometer

ISO 14129:1997 纤维增强塑料复合材料 用±45°张力试验法测定平面剪应力/剪应变特性,包括平面切变模量和剪切强度

1 This International Standard specifies a procedure for determining the in-plane shear stress/shear strain response, including the in-plane shear

Fibre-reinforced plastic composites - Determination of the in-plane shear stress/shear strain response, including the in-plane shear modulus and strength, by the ˝45° tension test method

EN ISO 14129:1997 纤维增强塑料复合材料.用±45°张力试验法测定平面剪应力/剪应变特性,包括平面切变模量和剪切强度 ISO 14129-1997

1.1 This International Standard specifies a procedure for determining the in-plane shear stress/shear strain response,including the in-plane shear

Fibre-Reinforced Plastic Composites - Determination of the in-Plane Shear Stress/Shear Strain Response, Including the in-Plane Shear Modulus and Strength, by the Plus or Minus 45 Degree Tension Test Method ISO 14129:1997

ASTM C848-88(2006) 用共振法测定卫生陶瓷的杨氏模量、切变模量和泊松比的标准试验方法

This test system has advantages in certain respects over the use of static loading systems in the measurement of ceramic whitewares

Standard Test Method for Young''s Modulus, Shear Modulus, and Poisson''s Ratio For Ceramic Whitewares by Resonance

TS 2859-1977 硫化橡胶．切变模量测定．四面剪力法

RUBBER, VULCANIZED - DETERMINATION OF MODULUS IN SHEAR - QUADRUPLE SHEAR METHOD

GB/T 2105-1991 金属材料杨氏模量、切变模量及泊松比测量方法(动力学法) 已作废

本标准规定了金属材料杨氏模量、切变模量及泊松比动力学测量方汉的术语定义、测量原理、测量 器具、变温装置、试样、测试条件与操作、数据处理、检测精度及试验报告的要坟。 本标准适用于-195～1200℃间材质均匀的金属材料的动态杨氏模量、动态切变模量及动态泊松比的测量。 除金属材料

Metallic material--Standard test method for the Young's modulus,Shear modulus and Poison's ratio (Dynamic method)

FORD WSK-M2G379-A6-2008 聚氨酯胶粘剂,暖应用环境可泵运低传导快速修复一组分高切变模量(和FORD WSS-M99P1111-A一起使用)在文件FORD WSK-M2G379-A1上

ADHESIVE, POLYURETHANE, ONE COMPONENT, HIGH SHEAR MODULUS, FAST FIX, LOW-CONDUCTIVE, AMBIENT PUMPABLE, WARM APPLIED ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on FORD WSK-M2G379-A1

FORD WSS-M2G316-B6-2009 中温施涂的可在环境温度条件下泵送的低导电性快速安装型高切变模量单组分聚氨酯胶粘剂***与标准FORD WSS-M99P1111-A一起使用***

ADHESIVE, POLYURETHANE, ONE COMPONENT, HIGH SHEAR MODULUS, FAST FIX, LOW-CONDUCTIVE, AMBIENT PUMPABLE, WARM APPLIED ***TO BE USED WITH FORD WSS-M99P1111-A***

FORD WSK-M2G379-A6-2009 中温施涂的可在环境温度条件下泵送的低导电性快速安装型高切变模量单组分聚氨酯胶粘剂***与标准FORD WSS-M99P1111-A一起使用***列于标准FORD WSK-M2G379-A1上［使用:FORD WSS-M2G316-B6,FORD WSS-M2G316-B6］

ADHESIVE, POLYURETHANE, ONE COMPONENT, HIGH SHEAR MODULUS, FAST FIX, LOW-CONDUCTIVE, AMBIENT PUMPABLE, WARM APPLIED ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSK-M2G379-A1)

FORD WSK-M2G379-A1-2009 中温施涂的可在环境温度条件下泵送的低导电性快速安装型高切变模量单组分聚氨酯胶粘剂***与标准FORD WSS-M99P1111-A一起使用***

ADHESIVE, POLYURETHANE, ONE COMPONENT, HIGH SHEAR MODULUS, FAST FIX, LOW-CONDUCTIVE, AMBIENT PUMPABLE, WARM APPLIED ***TO BE USED WITH FORD WSS-M99P1111-A***

EN ISO 14129:1997 纤维增强塑料复合材料.用±45°张力试验法测定平面剪应力/剪应变特性,包括平面切变模量和剪切强度 ISO 14129-1997

1.1 This International Standard specifies a procedure for determining the in-plane shear stress/shear strain response,including the in-plane shear

Fibre-Reinforced Plastic Composites - Determination of the in-Plane Shear Stress/Shear Strain Response, Including the in-Plane Shear Modulus and Strength, by the Plus or Minus 45 Degree Tension Test Method ISO 14129:1997

ASTM C848-88(2006) 用共振法测定卫生陶瓷的杨氏模量、切变模量和泊松比的标准试验方法

This test system has advantages in certain respects over the use of static loading systems in the measurement of ceramic whitewares

Standard Test Method for Young''s Modulus, Shear Modulus, and Poisson''s Ratio For Ceramic Whitewares by Resonance

ASTM D7312-07 采用超级铺面剪切试验器(SST)测定沥青混合物的永久剪切应变和复数切变模量用标准试验方法

The test procedures and associated analysis techniques described in this method can be used to determine complex shear modulus

Standard Test Method for Determining the Permanent Shear Strain and Complex Shear Modulus of Asphalt Mixtures Using the Superpave Shear Tester (SST)

ASTM D7312-10 采用超级铺面剪切试验器(SST)测定沥青混合物的永久剪切应变和复数切变模量用标准试验方法

The test procedures and associated analysis techniques described in this method can be used to determine complex shear modulus and permanent shear

Standard Test Method for Determining the Permanent Shear Strain and Complex Shear Modulus of Asphalt Mixtures Using the Superpave Shear Tester (SST)

ISO 14129:1997 纤维增强塑料复合材料 用±45°张力试验法测定平面剪应力/剪应变特性,包括平面切变模量和剪切强度

1 This International Standard specifies a procedure for determining the in-plane shear stress/shear strain response, including the in-plane shear

Fibre-reinforced plastic composites - Determination of the in-plane shear stress/shear strain response, including the in-plane shear modulus and strength, by the ˝45° tension test method

ASTM D7552-09 使用动力剪切流变仪测定沥青混合料的复数切变模量(G*)的标准试验方法

The complex shear modulus of bituminous mixtures is a fundamental property of the material. Test results at critical temperatures (T_critical

Standard Test Method for Determining the Complex Shear Modulus (G*) Of Bituminous Mixtures Using Dynamic Shear Rheometer