氧检测

📅 发布时间:2024-05-27 👤 来源:北检院 👁 阅读:

CSA Z314.2-09 UPD 1-2010 环氧乙烷法对医疗保健设施进行有效灭菌.第4版

Effective sterilization in health care facilities by the ethylene oxide process Fourth Edition

GB/T 24796-2009 环己基甲基二甲氧基硅烷

本标准规定了环己基甲基二甲氧基硅烷的要求、试验方法、检验规则、标志、包装、运输及贮存。 本标准适用于以二氯氢硅、环己烯、氯代环己烷、甲基三氯硅烷或甲基三甲氧基硅烷等为主要原料经不同工艺而合成的环己基甲基二甲氧基硅烷。 分子式、结构式略

Cyclohexyl-methyl-di-methoxysilane

NF T51-914-3-2009 塑料.环氧树脂.氯含量的测定.第3部分:总氯值

Plastics - Epoxy resins - Determination of chlorine content - Part 3 : total chlorine.

NF T51-914-1-2009 塑料.环氧树脂.氯含量的测定.第1部分:机氯

Plastics - Epoxy resins - Determination of chlorine content - Part 1 : inorganic chlorine.

NF C93-919-3-2-2009 光纤传连接器光纤接口.第3-2部分:8度PC角单模光纤用2.5mm和1.25mm直径圆柱形完全氧化钴套管接口

Fibre optic connector optical interfaces - Part 3-2 : optical interface, 2,5 mm and 1,25 mm diameter cylindrical full zirconia ferrules for 8 degrees angled-PC single mode fibres.

NF C93-919-3-1-2009 光纤连接器光纤接口.第3-1部分:单模光纤用2.5mm和1.25mm直径圆柱形完全氧化钴PC套管光纤接口

Fibre optic connector optical interfaces - Part 3-1 : optical interface, 2,5 mm and 1,25 mm diameter cylindrical full zirconia PC ferrule, single mode fibre.

NF T51-914-2-2009 塑料.环氧树脂.氯含量测定.第2部分:易皂化氯

Plastics - Epoxy resins - Determination of chlorine content - Part 2 : easily saponifiable chlorine.

NF V08-061-2009 食品和动物饲料原料微生物学.46℃条件下通过菌落计数技术对亚硫酸盐还原型细菌进行厌氧型差点法测定.

Microbiology of food and animal feeding stuffs - Anaerobic enumeration of sulfito-reducing bacteria by colony count technique at 46 oC.

NF A88-200-2-2009 焊接和相关工艺中的卫生安全.电弧焊产生的烟尘和气体取样的试验室方法.第2部分:焊接、切断和熔刮过程中一氧化碳(CO),二氧化碳(CO2),一氧化氮(NO)和二氧化氮(NO2)的气体排放率测定

Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Part 2 : determination of the emission rates of carbon monoxide (CO), carbon dioxide (CO2), nitrogen monoxide (NO) and nitrogen dioxide (NO2) during arc we

NF G37-112-2009 橡胶或塑料涂层织物.静态条件下臭氧分馏抗性试验

Rubber or plastics-coated fabrics - Determination of resistance to ozone cracking under static conditions.

NF A88-200-3-2009 焊接和相关工艺的卫生和安全.电弧焊产生的烟尘和气体取样的试验室方法.第3部分:电弧焊过程中臭氧排放速度的测定

Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Part 3 : determination of ozone emission rate during arc welding.

BS EN 1422-1997+A1-2009 医用消毒器.环氧乙烷消毒器.要求和试验方法

1.1 This European standard specifies the minimum performance requirements and test methods of two types of sterilizers employing ethylene oxide gas

Sterilizers for medical purposes - Ethylene oxide sterilizers - Requirements and test methods

SAE AS 1248A-1973 气态氧减压器用最低标准

This standard applies to pressure reducers for gaseous breathing oxygen systems and for all performance profiles without regard to particular inlet

Minimum Standard for Gaseous Oxygen Pressure Reducers

NF V18-233-2009 食品.动物饲料中脱氧萎镰菌醇的测定.免疫亲和柱层净化高效液相色谱法

Foodstuffs - Determination of Deoxynivalenol in animal feed - HPLC method with immunoaffinity column clean-up.

DIN EN 60099-4-2010 电涌放电器.第4部分:交流电系统用间隙金属氧化物电涌放电器

This part of IEC 60099 applies to non-linear metal-oxide resistor type surge arresters without spark gaps designed to limit voltage surges on a.c

Surge arresters - Part 4: Metal-oxide surge arresters without gaps for a.c. systems (IEC 60099-4:2004, modified + A1:2006 + A2:2009); German version EN 60099-4:2004 + A1:2006 + A2:2009

CSA Z314.2-09 UPD 1-2010 环氧乙烷法对医疗保健设施进行有效灭菌.第4版

Effective sterilization in health care facilities by the ethylene oxide process Fourth Edition

GB/T 24796-2009 环己基甲基二甲氧基硅烷

本标准规定了环己基甲基二甲氧基硅烷的要求、试验方法、检验规则、标志、包装、运输及贮存。 本标准适用于以二氯氢硅、环己烯、氯代环己烷、甲基三氯硅烷或甲基三甲氧基硅烷等为主要原料经不同工艺而合成的环己基甲基二甲氧基硅烷。 分子式、结构式略

Cyclohexyl-methyl-di-methoxysilane

NF T51-914-3-2009 塑料.环氧树脂.氯含量的测定.第3部分:总氯值

Plastics - Epoxy resins - Determination of chlorine content - Part 3 : total chlorine.

NF T51-914-1-2009 塑料.环氧树脂.氯含量的测定.第1部分:机氯

Plastics - Epoxy resins - Determination of chlorine content - Part 1 : inorganic chlorine.

NF C93-919-3-2-2009 光纤传连接器光纤接口.第3-2部分:8度PC角单模光纤用2.5mm和1.25mm直径圆柱形完全氧化钴套管接口

Fibre optic connector optical interfaces - Part 3-2 : optical interface, 2,5 mm and 1,25 mm diameter cylindrical full zirconia ferrules for 8 degrees angled-PC single mode fibres.

NF C93-919-3-1-2009 光纤连接器光纤接口.第3-1部分:单模光纤用2.5mm和1.25mm直径圆柱形完全氧化钴PC套管光纤接口

Fibre optic connector optical interfaces - Part 3-1 : optical interface, 2,5 mm and 1,25 mm diameter cylindrical full zirconia PC ferrule, single mode fibre.

NF T51-914-2-2009 塑料.环氧树脂.氯含量测定.第2部分:易皂化氯

Plastics - Epoxy resins - Determination of chlorine content - Part 2 : easily saponifiable chlorine.

NF V08-061-2009 食品和动物饲料原料微生物学.46℃条件下通过菌落计数技术对亚硫酸盐还原型细菌进行厌氧型差点法测定.

Microbiology of food and animal feeding stuffs - Anaerobic enumeration of sulfito-reducing bacteria by colony count technique at 46 oC.

NF A88-200-2-2009 焊接和相关工艺中的卫生安全.电弧焊产生的烟尘和气体取样的试验室方法.第2部分:焊接、切断和熔刮过程中一氧化碳(CO),二氧化碳(CO2),一氧化氮(NO)和二氧化氮(NO2)的气体排放率测定

Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Part 2 : determination of the emission rates of carbon monoxide (CO), carbon dioxide (CO2), nitrogen monoxide (NO) and nitrogen dioxide (NO2) during arc we

NF G37-112-2009 橡胶或塑料涂层织物.静态条件下臭氧分馏抗性试验

Rubber or plastics-coated fabrics - Determination of resistance to ozone cracking under static conditions.

NF A88-200-3-2009 焊接和相关工艺的卫生和安全.电弧焊产生的烟尘和气体取样的试验室方法.第3部分:电弧焊过程中臭氧排放速度的测定

Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Part 3 : determination of ozone emission rate during arc welding.

BS EN 1422-1997+A1-2009 医用消毒器.环氧乙烷消毒器.要求和试验方法

1.1 This European standard specifies the minimum performance requirements and test methods of two types of sterilizers employing ethylene oxide gas

Sterilizers for medical purposes - Ethylene oxide sterilizers - Requirements and test methods

SAE AS 1248A-1973 气态氧减压器用最低标准

This standard applies to pressure reducers for gaseous breathing oxygen systems and for all performance profiles without regard to particular inlet

Minimum Standard for Gaseous Oxygen Pressure Reducers

NF V18-233-2009 食品.动物饲料中脱氧萎镰菌醇的测定.免疫亲和柱层净化高效液相色谱法

Foodstuffs - Determination of Deoxynivalenol in animal feed - HPLC method with immunoaffinity column clean-up.

DIN EN 60099-4-2010 电涌放电器.第4部分:交流电系统用间隙金属氧化物电涌放电器

This part of IEC 60099 applies to non-linear metal-oxide resistor type surge arresters without spark gaps designed to limit voltage surges on a.c

Surge arresters - Part 4: Metal-oxide surge arresters without gaps for a.c. systems (IEC 60099-4:2004, modified + A1:2006 + A2:2009); German version EN 60099-4:2004 + A1:2006 + A2:2009

编辑:北检院编辑部

我们的优势

选择北检院的六大理由

📚

CMA/CNAS 双认证

旗下实验室具备国家认证认可监督管理委员会CMA资质认定及中国合格评定国家认可委员会CNAS实验室认可,检测报告具有国际公信力。

🔬

1000+ 台套先进设备

配备扫描电镜、气质联用仪、电感耦合等离子体质谱仪等国际先进检测仪器,确保数据精准可靠。

🏢

15000+ 平米实验室

拥有规模化专业检测基地,涵盖材料、化工、食品、环境等多个专业实验室,满足多领域检测需求。

👥

资深技术团队

汇聚材料科学、化学分析、环境工程等领域专家,拥有10年+行业经验,提供专业可靠的检测分析服务。

快速响应机制

标准检测周期短至3个工作日,加急服务24小时出具报告,全程一对一工程师跟进,确保高效交付。

🌎

全国服务网络

总部位于北京,山东设立分部,服务覆盖全国,为20万+客户提供便捷的一站式检测解决方案。

荣誉资质

旗下实验室资质荣誉

CMA 检验检测机构资质认定

CMA 检验检测机构资质认定

国家认证认可监督管理委员会颁发,具备向社会出具具有证明作用数据的资质。

CNAS 实验室认可证书

CNAS 实验室认可证书

中国合格评定国家认可委员会认可,检测结果获国际互认,具有国际公信力。

ISO 质量管理体系认证

ISO 质量管理体系认证

通过ISO 质量管理体系认证,管理体系实现规范化、标准化。

绿色低碳诚信示范创建企业

绿色低碳诚信示范创建企业

荣获绿色低碳诚信示范创建企业称号,践行可持续发展理念,推动绿色低碳转型,助力"双碳"目标实现。

北京市创新型中小企业

北京市"创新型"中小企业

经北京市经济和信息化局认定的创新型中小企业,具备较强创新能力与较高专业化水平,是优质中小企业梯度培育体系的重要基础力量。

北京市专精特新中小企业

北京市"专精特新"中小企业

经北京市经济和信息化局认定的专精特新中小企业,具备专业化、精细化、特色化、新颖化发展特征,在细分领域具有较强竞争优势。

查看全部资质

仪器设备

国际先进检测仪器,确保检测数据精准可靠

查看全部设备

检测流程

标准化流程,高效交付

01

需求沟通

客户提交检测需求,技术顾问一对一沟通,明确检测项目与标准。

02

样品寄送

客户按照规范要求寄送样品,实验室确认样品状态与数量。

03

实验检测

专业工程师按照标准方法进行检测分析,全程质量控制。

04

数据审核

检测数据经多级审核,确保结果准确、可靠、可追溯。

05

报告出具

出具检测报告,支持电子版与纸质版,快递送达。

VR实验室720°全景 NEW · 全新上线 VR实验室上线啦! 720°全景实景观览 · 足不出户走进实验室 立即体验 检测咨询 · 立即在线沟通