发布时间：2024-05-27 17:49:26 - 更新时间：2024年06月29日 15:22
点击量：0
有样品要送检？试试一键送检，5分钟极速响应
在线提交检测需求
对接客服咨询检测
Moulding and core sand mixtures. Method for determination of compressive strength limit at high temperatures
NASM21 THRU NASM37, "BOLT - CLEVIS", was adopted on 4 NOVEMBER 1999 for use by the Department of Defense (DoD). Proposed changes by DoD Activities
Bolt, 100 Degree Flush Head 160,000 PSI UTS Rev. 4
GUIDE FOR BUCKLING AND ULTIMATE STRENGTH ASSESSMENT FOR OFFSHORE STRUCTURES
Laminated glued wood method for determination of shear strength
Laminated glued wood. Method for determination of shear strength
Carbon products. Methods of determination for compressive, bend, tensile, strengths (diametral compression)
The principle consists in the application of a gradually increasing load to a test piece. Apparatus, preparation of test piece, procedure
Wood; Determination of ultimate tensile stress parallel to grain
Covers the radial and tangential directions. The principle consists in the application of a gradually increasing load to a test piece. Apparatus
Wood; Determination of ultimate tensile stress perpendicular to grain
The method described is based on applying a gradually increasing compressive load, either along the radial or along the tangential surface of a test
Wood; Determination of ultimate shearing stress parallel to grain
Wood - Dete?mination of Ultimate Tensile Stress Perpendicular to G?ain
Wood-Determination of Ultimate Tensile Stress Parallel to Grain
DETERMINATION OF UNCONFINED COMPBESSIVE STRENGTH OF R0CKS
Настоящий стандарт распространяется на твердые горные породы с пределом прочности при одноосном сжатии не менее 5
Rocks. Method for the determination of cut strength limit
Rocks. Method for determination of triaxial compressive strength
The General Services Administration has authorized the use of this commercial item description as a replacement for Military Specifications
SCREW, CAP, SOCKET HEAD, SQUARE 160 KSI, UTS
Moulding and core sand mixtures. Method for determination of compressive strength limit at high temperatures
NASM21 THRU NASM37, "BOLT - CLEVIS", was adopted on 4 NOVEMBER 1999 for use by the Department of Defense (DoD). Proposed changes by DoD Activities
Bolt, 100 Degree Flush Head 160,000 PSI UTS Rev. 4
GUIDE FOR BUCKLING AND ULTIMATE STRENGTH ASSESSMENT FOR OFFSHORE STRUCTURES
Laminated glued wood method for determination of shear strength
Laminated glued wood. Method for determination of shear strength
Carbon products. Methods of determination for compressive, bend, tensile, strengths (diametral compression)
The principle consists in the application of a gradually increasing load to a test piece. Apparatus, preparation of test piece, procedure
Wood; Determination of ultimate tensile stress parallel to grain
Covers the radial and tangential directions. The principle consists in the application of a gradually increasing load to a test piece. Apparatus
Wood; Determination of ultimate tensile stress perpendicular to grain
The method described is based on applying a gradually increasing compressive load, either along the radial or along the tangential surface of a test
Wood; Determination of ultimate shearing stress parallel to grain
Wood - Dete?mination of Ultimate Tensile Stress Perpendicular to G?ain
Wood-Determination of Ultimate Tensile Stress Parallel to Grain
DETERMINATION OF UNCONFINED COMPBESSIVE STRENGTH OF R0CKS
Настоящий стандарт распространяется на твердые горные породы с пределом прочности при одноосном сжатии не менее 5
Rocks. Method for the determination of cut strength limit
Rocks. Method for determination of triaxial compressive strength
The General Services Administration has authorized the use of this commercial item description as a replacement for Military Specifications
SCREW, CAP, SOCKET HEAD, SQUARE 160 KSI, UTS
首页
点击咨询
