发布时间：2024-05-27 17:49:26 - 更新时间：2024年06月29日 15:22
点击量：0
有样品要送检？试试一键送检，5分钟极速响应
在线提交检测需求
对接客服咨询检测
The document contains the manufacturing tolerances for both noble and base metal thermocouples manufactured in accordance with e.m.f.-temperature
Thermocouples; tolerances; identical with IEC 60584-2:1982 (status of 1989); german version HD 446.2 S2:1990
本标准是按标准第1部分电动势-温度关系制造的贵金属和廉金属热电偶的制造允差。允差值适用于向用户交货的通常用直径0.25mm至3mm的丝材制成的热电偶，而不得用作使用中热电偶的分度漂移值的允差
Thermocouples--Part 2: Tolerances
Contains the manufacturing tolerances for both noble and base metal thermocouples manufactured in accordance with e.m.f.-temperature relationships
Thermocouples Part 2: Tolerances (Edition 1.0)
이 규격은 KS B 0401에 규정하는 위의 치수 허용차 및 아래의 치수 허용차가 표시하는
Tolerances, allowable deviations and permissible wears of limit gauges
Amends IEC Publication 584-2 by additions and replacements, deletions and modifications
Amendment 1 Thermocouples Part 2: Tolerances (Edition 1.0)
本标准规定了热轧槽钢的尺寸、外形、重量及允许偏差。 本标准适用于腿部内侧有斜度的热轧槽钢
Hot-rolled channel steel--Dimensions,shape,weight and tolerances
本标准适用于厚度为3～60mm，宽度为10～150mm，截面为矩形的一般用途热轧扁钢
Dimensions, shape, weight and tolerances for hot-rolled flats
本标准规定了热轧圆盘条尺寸、外形、重量及允许偏差。本标准适用于公称直径为5 mm～40 mm各类钢的圆盘条
Dimenisions,shape,mass and tolerances for hot-rolled wire rods
本标准规定了热轧盘条尺寸、外形、重量及允许偏差。 本标准适用于直径为5.5～30mm各类钢的圆盘条
Dimenisions shape weight and tolerances for hot-rolled wire rods
This Standard specifies the dimensions, mass and their tolerances of hot rolled steel sections as well as the appearance, shapes and permissible
Dimensions, mass and permissible variations of hot rolled steel sections
この規格は，熱間圧延によって製造された形鋼の外観，形状及びその許容限度並びに寸法，質量及びその許容差について規定する。この規格の適用範囲及びこの規格で規定する事項の選択は，それぞれの製品規格に規定するか，又は受渡当事者間の協定による。なお，特に指定のない限り，本体を適用するが，受渡当事者間の協定によ
Dimensions, mass and permissible variations of hot rolled steel sections
Hot-rolled steel bars—Dimensions,shape,weight and tolerances
The document contains the manufacturing tolerances for both noble and base metal thermocouples manufactured in accordance with e.m.f.-temperature
Thermocouples; tolerances; identical with IEC 60584-2:1982 (status of 1989); german version HD 446.2 S2:1990
本标准是按标准第1部分电动势-温度关系制造的贵金属和廉金属热电偶的制造允差。允差值适用于向用户交货的通常用直径0.25mm至3mm的丝材制成的热电偶，而不得用作使用中热电偶的分度漂移值的允差
Thermocouples--Part 2: Tolerances
Contains the manufacturing tolerances for both noble and base metal thermocouples manufactured in accordance with e.m.f.-temperature relationships
Thermocouples Part 2: Tolerances (Edition 1.0)
이 규격은 KS B 0401에 규정하는 위의 치수 허용차 및 아래의 치수 허용차가 표시하는
Tolerances, allowable deviations and permissible wears of limit gauges
Amends IEC Publication 584-2 by additions and replacements, deletions and modifications
Amendment 1 Thermocouples Part 2: Tolerances (Edition 1.0)
本标准规定了热轧槽钢的尺寸、外形、重量及允许偏差。 本标准适用于腿部内侧有斜度的热轧槽钢
Hot-rolled channel steel--Dimensions,shape,weight and tolerances
本标准适用于厚度为3～60mm，宽度为10～150mm，截面为矩形的一般用途热轧扁钢
Dimensions, shape, weight and tolerances for hot-rolled flats
本标准规定了热轧圆盘条尺寸、外形、重量及允许偏差。本标准适用于公称直径为5 mm～40 mm各类钢的圆盘条
Dimenisions,shape,mass and tolerances for hot-rolled wire rods
本标准规定了热轧盘条尺寸、外形、重量及允许偏差。 本标准适用于直径为5.5～30mm各类钢的圆盘条
Dimenisions shape weight and tolerances for hot-rolled wire rods
This Standard specifies the dimensions, mass and their tolerances of hot rolled steel sections as well as the appearance, shapes and permissible
Dimensions, mass and permissible variations of hot rolled steel sections
この規格は，熱間圧延によって製造された形鋼の外観，形状及びその許容限度並びに寸法，質量及びその許容差について規定する。この規格の適用範囲及びこの規格で規定する事項の選択は，それぞれの製品規格に規定するか，又は受渡当事者間の協定による。なお，特に指定のない限り，本体を適用するが，受渡当事者間の協定によ
Dimensions, mass and permissible variations of hot rolled steel sections
Hot-rolled steel bars—Dimensions,shape,weight and tolerances
首页
点击咨询
