零散性检测

📅 发布时间:2024-05-27 👤 来源:北检院 👁 阅读:

YD/T 1001-2014 非位移单模光纤特

本标准规定了B4类非零色散位移单模光纤(NZDSF)的几何、光学、传输特性和机械、环境性能的要求。本标准适用于通信光缆和其他信息传输设备中使用的B4类非零色散位移单模光纤

Characteristics of a non-zero dispersion-shsfted single-mode optical fibre

ITU-T G.655-2009 非单模光纤光缆特

This Recommendation describes a single-mode fibre with a chromatic dispersion coefficient (absolute value) that is greater than some non-zero value

Characteristics of a non-zero dispersion-shifted single-mode optical fibre and cable (Study Group 15)

YD/T 1001-1999 非位移单模光纤特

本标准规定了非零色散位移单模光纤的几何、光学、传翰特性和机械、环境性能的要求。 本标准规定的单模光纤适用于通信网和其他通信设备,特别适用于密集波分复用的通信网及其他通信设备

Characteristics of a non-zero dispersion shifted single-mode optical fibre

COVENIN 601-1972 电子设备以及其部件的安全(或者件)

Esta norma tiene por objeto definir algunos conceptos sobre la confiabilidad de equipos electrónicos y de sus componentes (o piezas sueltas) (Capítulo

ITU-T G.656-2006 多频光传送中非光纤和电缆的特 研究15组

In this Recommendation, the expression "Administration" is used for conciseness to indicate both a telecommunication administration and a recognized

Characteristics of a fibre and cable with non-zero dispersion for wideband optical transport Study Group 15

KS Q ISO 22514-3-2016(2021 过程管理中的统计方法.能力和能.第3部分:离件测量数据的机器能研究

Statistical methods in process management — Capability and performance — Part 3: Machine performance studies for measured data on discrete parts

KS Q ISO 22514-3:2022 过程管理中的统计方法.能力和能.第3部分:离件测量数据的机器能研究

Statistical methods in process management — Capability and performance — Part 3: Machine performance studies for measured data on discrete parts

GB/T 9771.5-2008 通信用单模光纤.第5部分:非位移单模光纤特

GB/T 9771的本部分规定了B4类非零色散位移单模光纤的几何、光学、传输特性和机械、环境性能的要求,规定了光纤特性的测量方法。该类光纤的零色散波长不在1550nm附近,在使用波长区域具有一非零的小色散值,以抑制密集波分复用(DWDM)中四波混频(FWM)效应。不同类型的光纤可分别适用于

Single-mode optical fibres for telecommunication.Part 5:Charaterisics of a non-zero dispersion shifted single-mode optical fibre

GB/T 9771.5-2020 通信用单模光纤 第5部分:非位移单模光纤特

Single-mode optical fibres for telecommunication—Part 5: Characteristics of a non-zero dispersion shifted single-mode optical fibre

GB/T 9771.6-2020 通信用单模光纤 第6部分:宽波长段光传输用非单模光纤特

Single-mode optical fibres for telecommunication—Part 6: Characteristics of a fibre with non-zero dispersion for wideband optical transport

GB/T 9771.6-2008 通信用单模光纤.第6部分:宽波长段光传输用非单模光纤特

GB/T 9771的本部分规定了B5类宽波长段光传输非零色散单模光纤的几何、光学、传输特性和机械、环境性能的要求,规定了光纤特性的测量方法。该类光纤的色散值在1460nm~1625nm整个波段范围内都保持非零,它适用于在1460nm~1625nm波段范围内的密集波分复用(DWDM)应用或粗波分复用

Single-mode optical fibres for telecommunication.Part 6:Charaterisics of a fibre with non-zero dispersion for wideband optical transport

GB/T 9771.5-2000 通信用单模光纤系列 第5部分:非位移单模光纤特

本标准规定了GB/T 15972.1中B4类非零色散位移单模光纤的几何、光学、传输特性和机械、环境性能的要求。该类光纤的零色散波长不在1550nm附近,在使用波长区域具有一非零的小色散值,以抑制密集波分复用(DWDM)中四波混频(FWM)效应。它使用在1500~1600nm波长区域是最佳的

The series of single-mode optical fibres for telecommunication Part 5:Characteristics of a non-zero dispersion shifted single-mode optical fibre

GOST 20495-1975 表面经化学热处理的金属件的硬化.扩层的特质.术语及定义

Casestrengthening of metal components. Diffusion layer characteristic and properties. Terms and definitions

GOST R ISO 22514-3:2015 统计方法. 过程管理. 第3部分. 离件测量数据的整机能研究

Statistical methods. Process management. Part 3. Machine performance studies for measured data on discrete parts

SANS 22514-3-2009 在过程管理中的统计方法.能力及表现.第3部分:对离件测量数据的机器能研究

Prescribes the steps to be taken in conducting short-term performance studies on machines where parts produced consecutively under repeatability

Statistical methods in process management - Capability and performance Part 3: Machine performance studies for measured data on discrete parts

YD/T 1001-2014 非位移单模光纤特

本标准规定了B4类非零色散位移单模光纤(NZDSF)的几何、光学、传输特性和机械、环境性能的要求。本标准适用于通信光缆和其他信息传输设备中使用的B4类非零色散位移单模光纤

Characteristics of a non-zero dispersion-shsfted single-mode optical fibre

ITU-T G.655-2009 非单模光纤光缆特

This Recommendation describes a single-mode fibre with a chromatic dispersion coefficient (absolute value) that is greater than some non-zero value

Characteristics of a non-zero dispersion-shifted single-mode optical fibre and cable (Study Group 15)

YD/T 1001-1999 非位移单模光纤特

本标准规定了非零色散位移单模光纤的几何、光学、传翰特性和机械、环境性能的要求。 本标准规定的单模光纤适用于通信网和其他通信设备,特别适用于密集波分复用的通信网及其他通信设备

Characteristics of a non-zero dispersion shifted single-mode optical fibre

COVENIN 601-1972 电子设备以及其部件的安全(或者件)

Esta norma tiene por objeto definir algunos conceptos sobre la confiabilidad de equipos electrónicos y de sus componentes (o piezas sueltas) (Capítulo

ITU-T G.656-2006 多频光传送中非光纤和电缆的特 研究15组

In this Recommendation, the expression "Administration" is used for conciseness to indicate both a telecommunication administration and a recognized

Characteristics of a fibre and cable with non-zero dispersion for wideband optical transport Study Group 15

KS Q ISO 22514-3-2016(2021 过程管理中的统计方法.能力和能.第3部分:离件测量数据的机器能研究

Statistical methods in process management — Capability and performance — Part 3: Machine performance studies for measured data on discrete parts

KS Q ISO 22514-3:2022 过程管理中的统计方法.能力和能.第3部分:离件测量数据的机器能研究

Statistical methods in process management — Capability and performance — Part 3: Machine performance studies for measured data on discrete parts

GB/T 9771.5-2008 通信用单模光纤.第5部分:非位移单模光纤特

GB/T 9771的本部分规定了B4类非零色散位移单模光纤的几何、光学、传输特性和机械、环境性能的要求,规定了光纤特性的测量方法。该类光纤的零色散波长不在1550nm附近,在使用波长区域具有一非零的小色散值,以抑制密集波分复用(DWDM)中四波混频(FWM)效应。不同类型的光纤可分别适用于

Single-mode optical fibres for telecommunication.Part 5:Charaterisics of a non-zero dispersion shifted single-mode optical fibre

GB/T 9771.5-2020 通信用单模光纤 第5部分:非位移单模光纤特

Single-mode optical fibres for telecommunication—Part 5: Characteristics of a non-zero dispersion shifted single-mode optical fibre

GB/T 9771.6-2020 通信用单模光纤 第6部分:宽波长段光传输用非单模光纤特

Single-mode optical fibres for telecommunication—Part 6: Characteristics of a fibre with non-zero dispersion for wideband optical transport

GB/T 9771.6-2008 通信用单模光纤.第6部分:宽波长段光传输用非单模光纤特

GB/T 9771的本部分规定了B5类宽波长段光传输非零色散单模光纤的几何、光学、传输特性和机械、环境性能的要求,规定了光纤特性的测量方法。该类光纤的色散值在1460nm~1625nm整个波段范围内都保持非零,它适用于在1460nm~1625nm波段范围内的密集波分复用(DWDM)应用或粗波分复用

Single-mode optical fibres for telecommunication.Part 6:Charaterisics of a fibre with non-zero dispersion for wideband optical transport

GB/T 9771.5-2000 通信用单模光纤系列 第5部分:非位移单模光纤特

本标准规定了GB/T 15972.1中B4类非零色散位移单模光纤的几何、光学、传输特性和机械、环境性能的要求。该类光纤的零色散波长不在1550nm附近,在使用波长区域具有一非零的小色散值,以抑制密集波分复用(DWDM)中四波混频(FWM)效应。它使用在1500~1600nm波长区域是最佳的

The series of single-mode optical fibres for telecommunication Part 5:Characteristics of a non-zero dispersion shifted single-mode optical fibre

GOST 20495-1975 表面经化学热处理的金属件的硬化.扩层的特质.术语及定义

Casestrengthening of metal components. Diffusion layer characteristic and properties. Terms and definitions

GOST R ISO 22514-3:2015 统计方法. 过程管理. 第3部分. 离件测量数据的整机能研究

Statistical methods. Process management. Part 3. Machine performance studies for measured data on discrete parts

SANS 22514-3-2009 在过程管理中的统计方法.能力及表现.第3部分:对离件测量数据的机器能研究

Prescribes the steps to be taken in conducting short-term performance studies on machines where parts produced consecutively under repeatability

Statistical methods in process management - Capability and performance Part 3: Machine performance studies for measured data on discrete parts

编辑:北检院编辑部

我们的优势

选择北检院的六大理由

📚

CMA/CNAS 双认证

旗下实验室具备国家认证认可监督管理委员会CMA资质认定及中国合格评定国家认可委员会CNAS实验室认可,检测报告具有国际公信力。

🔬

1000+ 台套先进设备

配备扫描电镜、气质联用仪、电感耦合等离子体质谱仪等国际先进检测仪器,确保数据精准可靠。

🏢

15000+ 平米实验室

拥有规模化专业检测基地,涵盖材料、化工、食品、环境等多个专业实验室,满足多领域检测需求。

👥

资深技术团队

汇聚材料科学、化学分析、环境工程等领域专家,拥有10年+行业经验,提供专业可靠的检测分析服务。

快速响应机制

标准检测周期短至3个工作日,加急服务24小时出具报告,全程一对一工程师跟进,确保高效交付。

🌎

全国服务网络

总部位于北京,山东设立分部,服务覆盖全国,为20万+客户提供便捷的一站式检测解决方案。

荣誉资质

旗下实验室资质荣誉

CMA 检验检测机构资质认定

CMA 检验检测机构资质认定

国家认证认可监督管理委员会颁发,具备向社会出具具有证明作用数据的资质。

CNAS 实验室认可证书

CNAS 实验室认可证书

中国合格评定国家认可委员会认可,检测结果获国际互认,具有国际公信力。

ISO 质量管理体系认证

ISO 质量管理体系认证

通过ISO 质量管理体系认证,管理体系实现规范化、标准化。

绿色低碳诚信示范创建企业

绿色低碳诚信示范创建企业

荣获绿色低碳诚信示范创建企业称号,践行可持续发展理念,推动绿色低碳转型,助力"双碳"目标实现。

北京市创新型中小企业

北京市"创新型"中小企业

经北京市经济和信息化局认定的创新型中小企业,具备较强创新能力与较高专业化水平,是优质中小企业梯度培育体系的重要基础力量。

北京市专精特新中小企业

北京市"专精特新"中小企业

经北京市经济和信息化局认定的专精特新中小企业,具备专业化、精细化、特色化、新颖化发展特征,在细分领域具有较强竞争优势。

查看全部资质

仪器设备

国际先进检测仪器,确保检测数据精准可靠

查看全部设备

检测流程

标准化流程,高效交付

01

需求沟通

客户提交检测需求,技术顾问一对一沟通,明确检测项目与标准。

02

样品寄送

客户按照规范要求寄送样品,实验室确认样品状态与数量。

03

实验检测

专业工程师按照标准方法进行检测分析,全程质量控制。

04

数据审核

检测数据经多级审核,确保结果准确、可靠、可追溯。

05

报告出具

出具检测报告,支持电子版与纸质版,快递送达。

VR实验室720°全景 NEW · 全新上线 VR实验室上线啦! 720°全景实景观览 · 足不出户走进实验室 立即体验 检测咨询 · 立即在线沟通