HG/T 3868-2008 硫化橡胶.高温拉伸强度和拉断伸长率的测定
本标准规定了硫化橡胶高温拉伸强度、拉断伸长率及耐热系数的测定方法。 本标准不适用于硬质橡胶及类似的低伸长率材料
Vulcanized rubber.Determination of tensile strength and elongation at break in high temperature
NP ISO 2285:1999 硫化橡胶或热塑性塑料．高温及正常温度下残余变形的拉力测量
A presente Norma especifica o método para determinar a deforma??o residual após trac??o de borrachas vulcanizadas ou termoplásticas. O ensaio
Rubber, vulcanized or thermoplastic Determination of tension set at normal and high temperatures
JEDEC JESD22-A103C-2004 高温贮存
The test is applicable for evaluation, screening, monitoring, and/or qualification of all solid state devices
High Temperature Storage Life
GOST 26126-1984 钎焊连接.高温拉力试验法
Non-destructive testing brazed and soldered joints. Ultrasonic methods for inspection of quality
ANSI/ASTM E21:1992 金属材料高温拉力试验方法
These test methods cover procedure and equipment for the determination of tensile strength, yield strength, elongation, and reduction of area
Test Methods for Elevated Temperature Tension Tests of Metallic Materials
GB/T 38520-2020 船用超低温拉断阀
Marine cryogenic breakaway coupling
ISO/R 206:1961 钢在高温下的蠕变应力断裂试验
Creep stress rupture testing of steel at elevated temperatures
GB/T 6037-1985 硫化橡胶高温拉伸强度和扯断伸长率的测定
本标准适用于测定硫化橡胶的高温拉伸强度、扯断伸长率和耐热系数。对于硬质橡胶以及类似的低伸长率材料是不适用的
Vulcanized rubber--Determination of tensile strength and ultimate elongation at high temperatures
STAS 10519-1976 硫化橡胶．在常温和高温下连续拉伸张力测定
1.1. Prezentul standard se refer? la metoda de determinare a de?orma?iei remanente a cauciu-cului vulcanizat, dup? alungire constant?, la
VULCANIZED RUBBERS Determination of tension set under constant elongation, at normal and high temperatures
JIS G0567-1998 钢和耐热合金的高温拉力试验方法
この規格は，常温を超える温度における鉄鋼材料及び耐熱合金の引張試験方法について規定する
Method of elevated temperature tensile test for steels and heat-resisting alloys
JIS G0567-2012 钢和耐热合金的高温拉力试验方法
This Standard specifies a method of tensile test for steels and heat-resisting alloys at temperatures exceeding room temperature
Method of elevated temperature tensile test for steels and heat-resisting alloys
PD 6525-1-1990 压力用钢的高温性能.第1部分:应力断裂性能
Brings together average stress rupture values for many wrought carbon, ferritic alloy and austenitic steels, given in separate materials standards
Elevated temperature properties for steels for pressure purposes. Stress rupture properties
GB/T 14994-2008 高温合金冷拉棒材
本标准规定了高温合金冷拉棒材的尺寸、外形及允许偏差、技术要求、试验方法、检验规则、包装、标志及质量证明书等。 本标准适用于高温合金冷拉棒材，可用于制造工业用紧固件等零件
Superalloy cold drawn bars
SANS 538-2007 高温木材保存木馏油
This specification covers creosote that is derived entirely from coal tar produced by the high-temperature carbonization of bituminous coal
High-temperature wood-preserving creosote
EN 10002-5-1991 金属材料.拉力试验.第5部分:高温试验法
Metallic Materials - Tensile Testing - Part 5: Method of Testing at Elevated Temperature
HG/T 3868-2008 硫化橡胶.高温拉伸强度和拉断伸长率的测定
本标准规定了硫化橡胶高温拉伸强度、拉断伸长率及耐热系数的测定方法。 本标准不适用于硬质橡胶及类似的低伸长率材料
Vulcanized rubber.Determination of tensile strength and elongation at break in high temperature
NP ISO 2285:1999 硫化橡胶或热塑性塑料．高温及正常温度下残余变形的拉力测量
A presente Norma especifica o método para determinar a deforma??o residual após trac??o de borrachas vulcanizadas ou termoplásticas. O ensaio
Rubber, vulcanized or thermoplastic Determination of tension set at normal and high temperatures
JEDEC JESD22-A103C-2004 高温贮存
The test is applicable for evaluation, screening, monitoring, and/or qualification of all solid state devices
High Temperature Storage Life
GOST 26126-1984 钎焊连接.高温拉力试验法
Non-destructive testing brazed and soldered joints. Ultrasonic methods for inspection of quality
ANSI/ASTM E21:1992 金属材料高温拉力试验方法
These test methods cover procedure and equipment for the determination of tensile strength, yield strength, elongation, and reduction of area
Test Methods for Elevated Temperature Tension Tests of Metallic Materials
GB/T 38520-2020 船用超低温拉断阀
Marine cryogenic breakaway coupling
ISO/R 206:1961 钢在高温下的蠕变应力断裂试验
Creep stress rupture testing of steel at elevated temperatures
STAS 10519-1976 硫化橡胶．在常温和高温下连续拉伸张力测定
1.1. Prezentul standard se refer? la metoda de determinare a de?orma?iei remanente a cauciu-cului vulcanizat, dup? alungire constant?, la
VULCANIZED RUBBERS Determination of tension set under constant elongation, at normal and high temperatures
GB/T 6037-1985 硫化橡胶高温拉伸强度和扯断伸长率的测定
本标准适用于测定硫化橡胶的高温拉伸强度、扯断伸长率和耐热系数。对于硬质橡胶以及类似的低伸长率材料是不适用的
Vulcanized rubber--Determination of tensile strength and ultimate elongation at high temperatures
JIS G0567-1998 钢和耐热合金的高温拉力试验方法
この規格は，常温を超える温度における鉄鋼材料及び耐熱合金の引張試験方法について規定する
Method of elevated temperature tensile test for steels and heat-resisting alloys
JIS G0567-2012 钢和耐热合金的高温拉力试验方法
This Standard specifies a method of tensile test for steels and heat-resisting alloys at temperatures exceeding room temperature
Method of elevated temperature tensile test for steels and heat-resisting alloys
PD 6525-1-1990 压力用钢的高温性能.第1部分:应力断裂性能
Brings together average stress rupture values for many wrought carbon, ferritic alloy and austenitic steels, given in separate materials standards
Elevated temperature properties for steels for pressure purposes. Stress rupture properties
GB/T 14994-2008 高温合金冷拉棒材
本标准规定了高温合金冷拉棒材的尺寸、外形及允许偏差、技术要求、试验方法、检验规则、包装、标志及质量证明书等。 本标准适用于高温合金冷拉棒材，可用于制造工业用紧固件等零件
Superalloy cold drawn bars
SANS 538-2007 高温木材保存木馏油
This specification covers creosote that is derived entirely from coal tar produced by the high-temperature carbonization of bituminous coal
High-temperature wood-preserving creosote
EN 10002-5-1991 金属材料.拉力试验.第5部分:高温试验法
Metallic Materials - Tensile Testing - Part 5: Method of Testing at Elevated Temperature
编辑：北检院编辑部
