JIS Z3138-1989 点焊接头疲劳试验法
この規格は，板厚が0.5mm以上6.0mm以下の金属板を対象として，室温大気中で行う2枚重ね1点スボプト溶接継手の標準疲れ試験片(以下，試験片という。)による最小最大荷重比が0.2以下の引張せん断疲れ試験方法及び十字形引張疲れ試験方法について規定する
Method of fatigue testing for spot welded joint
GOST 26446-1985 钎焊接头.疲劳试验方法
Brazed and soldered joints. Methods of fatigue testing
KS B ISO 12108:2004 金属材料.疲劳试验.疲劳裂痕增长试验
이 규격은 하한 응력 확대 계수 범위(threshold stress intensity fa
Metallic materials－Fatigue testing－Fatigue crack growth method
ISO/TR 12112:2018 金属材料 - 疲劳试验 - 多轴疲劳试验方法
Metallic materials — Principles and designs for multiaxial fatigue testing
BS ISO 12108:2012 金属材料.疲劳试验.疲劳裂痕增长试验
Metallic materials. Fatigue testing. Fatigue crack growth method
ISO 12108:2002 金属材料.疲劳试验.疲劳裂痕增长试验
This International Standard describes tests for determining the fatigue crack growth rate from the threshold stress-intensity factor range, △Kth
Metallic materials - Fatigue testing - Fatigue crack growth method
ISO 12108:2012 金属材料.疲劳试验.疲劳裂痕增长试验
Metallic materials - Fatigue testing - Fatigue crack growth method
BS ISO 12108:2018 金属材料 疲劳试验 疲劳裂痕增长试验
Metallic materials. Fatigue testing. Fatigue crack growth method
ISO 12108:2018 金属材料.疲劳试验.疲劳裂痕增长试验
Metallic materials - Fatigue testing - Fatigue crack growth method
GJB 715.9-1990 紧固件试验方法 抗剪接头疲劳
ISO/TR 14345:2012 疲劳度.焊接组件的疲劳试验.指南
Fatigue - Fatigue testing of welded components - Guidance
BS 3518-2:1962 疲劳试验方法.第2部分:回转弯曲疲劳试验
Describes the procedure for carrying out rotating bending fatigue tests where the test piece and not the load is rotated. Recommendations on the form
Methods of fatigue testing - Rotating bending fatigue tests
BS 3518-3:1963 疲劳试验方法.第3部分:直接应力疲劳试验
Describes the procedure for carrying out direct stress fatigue tests on test pieces without deliberately introduced stress concentrations
Methods of fatigue testing - Direct stress fatigue tests
ASTM D6588-02 轮胎棱疲劳的标准试验方法(盘式疲劳试验)
This test method is not recommended for acceptance testing of commercial shipments in the absence of reliable information
Standard Test Method for Fatigue of Tire Cords (Disc Fatigue Test)
JB/T 7716-1995 焊接接头四点弯曲疲劳试验方法
本标准规定了焊接接头四点弯曲疲劳试验方法。 本标准适用于焊接结构中接头区寻找疲劳薄弱环节的疲劳试验以及疲劳寿命评定。钢结构也可参照使用
JIS Z3138-1989 点焊接头疲劳试验法
この規格は，板厚が0.5mm以上6.0mm以下の金属板を対象として，室温大気中で行う2枚重ね1点スボプト溶接継手の標準疲れ試験片(以下，試験片という。)による最小最大荷重比が0.2以下の引張せん断疲れ試験方法及び十字形引張疲れ試験方法について規定する
Method of fatigue testing for spot welded joint
GOST 26446-1985 钎焊接头.疲劳试验方法
Brazed and soldered joints. Methods of fatigue testing
KS B ISO 12108:2004 金属材料.疲劳试验.疲劳裂痕增长试验
이 규격은 하한 응력 확대 계수 범위(threshold stress intensity fa
Metallic materials－Fatigue testing－Fatigue crack growth method
ISO/TR 12112:2018 金属材料 - 疲劳试验 - 多轴疲劳试验方法
Metallic materials — Principles and designs for multiaxial fatigue testing
BS ISO 12108:2012 金属材料.疲劳试验.疲劳裂痕增长试验
Metallic materials. Fatigue testing. Fatigue crack growth method
ISO 12108:2002 金属材料.疲劳试验.疲劳裂痕增长试验
This International Standard describes tests for determining the fatigue crack growth rate from the threshold stress-intensity factor range, △Kth
Metallic materials - Fatigue testing - Fatigue crack growth method
ISO 12108:2012 金属材料.疲劳试验.疲劳裂痕增长试验
Metallic materials - Fatigue testing - Fatigue crack growth method
BS ISO 12108:2018 金属材料 疲劳试验 疲劳裂痕增长试验
Metallic materials. Fatigue testing. Fatigue crack growth method
ISO 12108:2018 金属材料.疲劳试验.疲劳裂痕增长试验
Metallic materials - Fatigue testing - Fatigue crack growth method
GJB 715.9-1990 紧固件试验方法 抗剪接头疲劳
ISO/TR 14345:2012 疲劳度.焊接组件的疲劳试验.指南
Fatigue - Fatigue testing of welded components - Guidance
BS 3518-2:1962 疲劳试验方法.第2部分:回转弯曲疲劳试验
Describes the procedure for carrying out rotating bending fatigue tests where the test piece and not the load is rotated. Recommendations on the form
Methods of fatigue testing - Rotating bending fatigue tests
BS 3518-3:1963 疲劳试验方法.第3部分:直接应力疲劳试验
Describes the procedure for carrying out direct stress fatigue tests on test pieces without deliberately introduced stress concentrations
Methods of fatigue testing - Direct stress fatigue tests
ASTM D6588-02 轮胎棱疲劳的标准试验方法(盘式疲劳试验)
This test method is not recommended for acceptance testing of commercial shipments in the absence of reliable information
Standard Test Method for Fatigue of Tire Cords (Disc Fatigue Test)
JB/T 7716-1995 焊接接头四点弯曲疲劳试验方法
本标准规定了焊接接头四点弯曲疲劳试验方法。 本标准适用于焊接结构中接头区寻找疲劳薄弱环节的疲劳试验以及疲劳寿命评定。钢结构也可参照使用
编辑：北检院编辑部
