金属热喷涂层检测

GB/T 13222-1991 金属热喷涂层剪切强度的测定

本标准规定了金属热喷涂层剪切强度的测定方法。 本标准适用于金属热喷涂层剪切强度的测定

Thermal sprayed metallic coatings--Determination of shear strength

YS/T 550-2006 金属热喷涂层剪切强度的测定

GB/T 8640-1988 金属热喷涂层表面洛氏硬度试验方法

本标准适用于金属热喷涂层的表面洛氏硬度（N和T标尺）的测定

Thermal sprayed metallic coatings--Rockwell hardness test

YS/T 541-2006 金属热喷涂层表面洛氏硬度试验方法

YY/T 0988.15-2016 外科植入物涂层.第15部分:金属热喷涂涂层耐磨性能试验方法

YY/T 0988的本部分用于量化热喷涂方法喷涂在金属平面上的金属涂层的耐磨性能。本部分旨在为外科植入物用途层提供一种表征方法。本部分通过磨耗仪产生的滚动与摩擦的混合作用使涂层表面产生磨损。磨损通过累计质量损失进行量化。本试验方法仅用于平的刚性试样。试样不与水发生明显反应，在室温与100℃之间的空气

Coatings of surgical implants.Part 15:Test methord for abrasion resistance testing of metallic thermal spray coatings

ASTM F1978-00(2007)e1 用Taber Abraser测量金属热喷涂涂层耐磨性的标准试验方法

Standard Test Method for Measuring Abrasion Resistance of Metallic Thermal Spray Coatings by Using the Taber Abraser

ASTM F1978-17 用Taber Abraser测量金属热喷涂涂层耐磨性的标准试验方法

Standard Test Method for Measuring Abrasion Resistance of Metallic Thermal Spray Coatings by Using the Taber Abraser

ASTM F1978-18 用Taber Abraser测量金属热喷涂涂层耐磨性的标准试验方法

Standard Test Method for Measuring Abrasion Resistance of Metallic Thermal Spray Coatings by Using the Taber Abraser

ASTM F1978-00 用Taber^TM研磨机测量金属热喷涂涂层耐磨性的标准试验方法

1.1 This test method quantifies the abrasion resistance of metallic coatings produced by thermal spray processes on flat metallic surfaces

Standard Test Method for Measuring Abrasion Resistance of Metallic Thermal Spray Coatings by Using the Taber^TM Abraser

ASTM F1978-12 用泰伯耐磨性测试仪测量金属热喷射涂层抗磨损性的标准试验方法

This test method provides a means to evaluate the resistance to particle shedding of a thermal spray coating. Such particle shedding might occur

Standard Test Method for Measuring Abrasion Resistance of Metallic Thermal Spray Coatings by Using the Taber Abraser

CSN 03 8762-1989 热喷金属及有机涂层联合涂层

Zpracovatel a oborové normaliza?ní st?edisko: Státní v?zkumn? ústav ochrany materiálu G. V. Akimova, Praha, I?O 002364 — Bernard Knápek, Jaromír

Combined coatings of thermal spray-ed metals and organic coatings

EN 16813:2016 热喷涂-用涡流法测量热喷涂非铁金属涂层的电导率

This European standard specifies the procedure of the measurement of the electrical conductivity of non-Ferro-magnetic thermal sprayed coatings

Thermal spraying - Measurement of the electrical conductivity of thermal sprayed non-iron metal coatings by means of eddy current method

ASTM F1978-99 用泰伯磨耗试验机测定金属化热喷射涂层抗磨损性的标准试验方法

1.1 This test method quantifies the abrasion resistance of metallic coatings produced by thermal spray processes on flat metallic surfaces

Standard Test Method for Measuring Abrasion Resistance of Metallic Thermal Spray Coatings by Using the Taber^TM Abraser

ASTM F1978-00e1 用泰伯磨耗试验机测定金属化热喷射涂层抗磨损性的标准试验方法

1.1 This test method quantifies the abrasion resistance of metallic coatings produced by thermal spray processes on flat metallic surfaces

Standard Test Method for Measuring Abrasion Resistance of Metallic Thermal Spray Coatings by Using the Taber^TM Abraser

ASTM F1978-00(2007)e2 用泰伯磨耗试验机测定金属化热喷射涂层抗磨损性的标准试验方法

This test method provides a means to evaluate the resistance to particle shedding of a thermal spray coating. Such particle shedding

Standard Test Method for Measuring Abrasion Resistance of Metallic Thermal Spray Coatings by Using the Taber Abraser

GB/T 13222-1991 金属热喷涂层剪切强度的测定

本标准规定了金属热喷涂层剪切强度的测定方法。 本标准适用于金属热喷涂层剪切强度的测定

Thermal sprayed metallic coatings--Determination of shear strength

YS/T 550-2006 金属热喷涂层剪切强度的测定

GB/T 8640-1988 金属热喷涂层表面洛氏硬度试验方法

本标准适用于金属热喷涂层的表面洛氏硬度（N和T标尺）的测定

Thermal sprayed metallic coatings--Rockwell hardness test

YS/T 541-2006 金属热喷涂层表面洛氏硬度试验方法

YY/T 0988.15-2016 外科植入物涂层.第15部分:金属热喷涂涂层耐磨性能试验方法

YY/T 0988的本部分用于量化热喷涂方法喷涂在金属平面上的金属涂层的耐磨性能。本部分旨在为外科植入物用途层提供一种表征方法。本部分通过磨耗仪产生的滚动与摩擦的混合作用使涂层表面产生磨损。磨损通过累计质量损失进行量化。本试验方法仅用于平的刚性试样。试样不与水发生明显反应，在室温与100℃之间的空气

Coatings of surgical implants.Part 15:Test methord for abrasion resistance testing of metallic thermal spray coatings

ASTM F1978-00(2007)e1 用Taber Abraser测量金属热喷涂涂层耐磨性的标准试验方法

Standard Test Method for Measuring Abrasion Resistance of Metallic Thermal Spray Coatings by Using the Taber Abraser

ASTM F1978-17 用Taber Abraser测量金属热喷涂涂层耐磨性的标准试验方法

Standard Test Method for Measuring Abrasion Resistance of Metallic Thermal Spray Coatings by Using the Taber Abraser

ASTM F1978-18 用Taber Abraser测量金属热喷涂涂层耐磨性的标准试验方法

Standard Test Method for Measuring Abrasion Resistance of Metallic Thermal Spray Coatings by Using the Taber Abraser

ASTM F1978-00 用Taber^TM研磨机测量金属热喷涂涂层耐磨性的标准试验方法

1.1 This test method quantifies the abrasion resistance of metallic coatings produced by thermal spray processes on flat metallic surfaces

Standard Test Method for Measuring Abrasion Resistance of Metallic Thermal Spray Coatings by Using the Taber^TM Abraser

ASTM F1978-12 用泰伯耐磨性测试仪测量金属热喷射涂层抗磨损性的标准试验方法

This test method provides a means to evaluate the resistance to particle shedding of a thermal spray coating. Such particle shedding might occur

Standard Test Method for Measuring Abrasion Resistance of Metallic Thermal Spray Coatings by Using the Taber Abraser

CSN 03 8762-1989 热喷金属及有机涂层联合涂层

Zpracovatel a oborové normaliza?ní st?edisko: Státní v?zkumn? ústav ochrany materiálu G. V. Akimova, Praha, I?O 002364 — Bernard Knápek, Jaromír

Combined coatings of thermal spray-ed metals and organic coatings

EN 16813:2016 热喷涂-用涡流法测量热喷涂非铁金属涂层的电导率

This European standard specifies the procedure of the measurement of the electrical conductivity of non-Ferro-magnetic thermal sprayed coatings

Thermal spraying - Measurement of the electrical conductivity of thermal sprayed non-iron metal coatings by means of eddy current method

ASTM F1978-99 用泰伯磨耗试验机测定金属化热喷射涂层抗磨损性的标准试验方法

1.1 This test method quantifies the abrasion resistance of metallic coatings produced by thermal spray processes on flat metallic surfaces

Standard Test Method for Measuring Abrasion Resistance of Metallic Thermal Spray Coatings by Using the Taber^TM Abraser

ASTM F1978-00e1 用泰伯磨耗试验机测定金属化热喷射涂层抗磨损性的标准试验方法

1.1 This test method quantifies the abrasion resistance of metallic coatings produced by thermal spray processes on flat metallic surfaces

Standard Test Method for Measuring Abrasion Resistance of Metallic Thermal Spray Coatings by Using the Taber^TM Abraser

ASTM F1978-00(2007)e2 用泰伯磨耗试验机测定金属化热喷射涂层抗磨损性的标准试验方法

This test method provides a means to evaluate the resistance to particle shedding of a thermal spray coating. Such particle shedding

Standard Test Method for Measuring Abrasion Resistance of Metallic Thermal Spray Coatings by Using the Taber Abraser