GOST 21515-1976 介电材料.术语和定义
Dielectric materials. Terms and definitions
GOST 22372-1977 介电材料.在100Hz～5MHz频段内介电常数和介电损耗角正切值测量方法
Dielectric materials. Methods of determination of permittivity and powerfactor with in a frequency range of 100 to 5·10 in 6 degree Hz
IPC DD-135-1995 多芯片模块沉积有机层间介电材料认证测试
This standard has been written for deposited organic interlayer dielectric materials under evaluation for MCM-D applications. The standard and test
Qualification Testing for Deposited Organic Interlayer Dielectric Materials for Multichip Modules
BS DD IEC/TS 61994-4-2:2011 频率控制和选择用压电和介电器件.术语汇编.压电和介电材料.压电陶瓷
Piezoelectric, dielectric and electrostatic devices and associated materials for frequency control, selection and detection. Glossary. Piezoelectric and dielectric materials. Piezoelectric ceramics
T/CSTM 00751-2022 微波波段固态电介质材料介电性能测试 闭腔法
本文件规定了采用闭腔法测量频率在1 GHz~20 GHz范围内的固体电介质和复合板材料的介电常数和损耗角正切值的方法。其中，介电常数的测试范围为5~100，损耗角正切值的测试范围为0.00005~0.005。 本文件适用于可加工为柱状的氧化硅、氧化铝、氮化铝、氧化锆、氮化硼等
Measurement of dielectric properties of solid-state dielectric materials in microwave frequency range—The closed cavity method
PAS 1022-2004 检测材料及介电材料性质以及用椭偏仪测量薄膜层厚度的参考程序
Reference procedure for the determination of optical and dielectric material properties and the layer thickness of thin films by ellipsometry
ASTM D3756-97 使用分散电场法对固体介电材料抗树枝状电击穿性的试验方法
1.1 This test method covers the evaluation and comparison of the resistance of solid organic dielectric materials to the initiation or growth
Standard Test Method for Evaluation of Resistance To Electrical Breakdown By Treeing In Solid Dielectric Materials Using Diverging Fields
ASTM D3756-97(2004 使用分散电场法对固体介电材料抗树枝状电击穿性的试验方法
This is a laboratory test designed to simulate the effects of (1) the presence of rough interfaces between
Standard Test Method for Evaluation of Resistance to Electrical Breakdown by Treeing in Solid Dielectric Materials Using Diverging Fields
IEC TS 61994-4-2:2003 频率控制和选择用压电和介电器件.术语汇编.第4-2部分:压电和介电材料.压电陶瓷
Specifies the terms and definitions for piezoelectric ceramics representing the present state-of-the-art, which are intended for use in the standards
Piezoelectric and dielectric devices for frequency control and selection - Glossary - Part 4-2: Piezoelectric and dielectric materials - Piezoelectric ceramics
IEC TS 61994-4-2:2011 频率控制和选择用压电和介电器件.术语汇编.第4-2部分:压电和介电材料.压电陶瓷
Piezoelectric, dielectric and electrostatic devices and associated materials for frequency control, selection and detection - Glossary - Part 4-2: Piezoelectric and dielectric materials - Piezoelectric ceramics
ASTM D3756-97(2010 使用分散电场法对固体介电材料抗树枝状电击穿性进行评估的标准试验方法
This is a laboratory test designed to simulate the effects of (1) the presence of rough interfaces between conductor
Standard Test Method for Evaluation of Resistance to Electrical Breakdown by Treeing in Solid Dielectric Materials Using Diverging Fields
GB/T 9534-1988 毫米波频段固体电介质材料介电特性测试方法 准光腔法
本标准采用光学腔，即半共焦准光腔作为测试腔体来测试固体电介质的介电特性。 本标准适用于可加工成片状的固体电介质材料
Test method for complex permittivity of solid dielectric materials at millimeter wave frequencies using "Quasi-Optic cavity" technique
GB/T 9533-1988 微波固体电介质材料介电特性测试方法 同轴终端短路法
本标准适用于加工成圆筒状的均匀固体电介质材料的介电常数ε′和损耗角正切tanδ的测试
IEC 49/855/CD:2009 频率控制和选择用压电装置和电介质装置.术语表.第4-2部分:压电材料和电介质材料.压电陶瓷
Piezoelectric and dielectric devices for frequency control and selection - Glossary - Part 4-2: Piezoelectric and dielectric materials - Piezoelectric ceramics
GB/T 11297.11-2015 热释电材料介电常数的测试方法
本部分规定了热释电陶瓷、晶体和有机材料在100 Hz~100 kHz范围介电常数的测试方法。 本部分适用于测量钛酸铅、锆钛酸铅、钛酸锶钡、钽钪酸铅等热释电陶瓷材料和铌镁酸铅、钽酸锂、三甘氨酸硫酸盐族等热释电晶体材料的介电常数，也适用于测量其他类似陶瓷、晶体及有机热释电材料的介电常数
Test method for dielectric constant of pyroelectric materials
GOST 21515-1976 介电材料.术语和定义
Dielectric materials. Terms and definitions
GOST 22372-1977 介电材料.在100Hz～5MHz频段内介电常数和介电损耗角正切值测量方法
Dielectric materials. Methods of determination of permittivity and powerfactor with in a frequency range of 100 to 5·10 in 6 degree Hz
IPC DD-135-1995 多芯片模块沉积有机层间介电材料认证测试
This standard has been written for deposited organic interlayer dielectric materials under evaluation for MCM-D applications. The standard and test
Qualification Testing for Deposited Organic Interlayer Dielectric Materials for Multichip Modules
BS DD IEC/TS 61994-4-2:2011 频率控制和选择用压电和介电器件.术语汇编.压电和介电材料.压电陶瓷
Piezoelectric, dielectric and electrostatic devices and associated materials for frequency control, selection and detection. Glossary. Piezoelectric and dielectric materials. Piezoelectric ceramics
T/CSTM 00751-2022 微波波段固态电介质材料介电性能测试 闭腔法
本文件规定了采用闭腔法测量频率在1 GHz~20 GHz范围内的固体电介质和复合板材料的介电常数和损耗角正切值的方法。其中，介电常数的测试范围为5~100，损耗角正切值的测试范围为0.00005~0.005。 本文件适用于可加工为柱状的氧化硅、氧化铝、氮化铝、氧化锆、氮化硼等
Measurement of dielectric properties of solid-state dielectric materials in microwave frequency range—The closed cavity method
PAS 1022-2004 检测材料及介电材料性质以及用椭偏仪测量薄膜层厚度的参考程序
Reference procedure for the determination of optical and dielectric material properties and the layer thickness of thin films by ellipsometry
ASTM D3756-97 使用分散电场法对固体介电材料抗树枝状电击穿性的试验方法
1.1 This test method covers the evaluation and comparison of the resistance of solid organic dielectric materials to the initiation or growth
Standard Test Method for Evaluation of Resistance To Electrical Breakdown By Treeing In Solid Dielectric Materials Using Diverging Fields
ASTM D3756-97(2004 使用分散电场法对固体介电材料抗树枝状电击穿性的试验方法
This is a laboratory test designed to simulate the effects of (1) the presence of rough interfaces between
Standard Test Method for Evaluation of Resistance to Electrical Breakdown by Treeing in Solid Dielectric Materials Using Diverging Fields
IEC TS 61994-4-2:2003 频率控制和选择用压电和介电器件.术语汇编.第4-2部分:压电和介电材料.压电陶瓷
Specifies the terms and definitions for piezoelectric ceramics representing the present state-of-the-art, which are intended for use in the standards
Piezoelectric and dielectric devices for frequency control and selection - Glossary - Part 4-2: Piezoelectric and dielectric materials - Piezoelectric ceramics
IEC TS 61994-4-2:2011 频率控制和选择用压电和介电器件.术语汇编.第4-2部分:压电和介电材料.压电陶瓷
Piezoelectric, dielectric and electrostatic devices and associated materials for frequency control, selection and detection - Glossary - Part 4-2: Piezoelectric and dielectric materials - Piezoelectric ceramics
ASTM D3756-97(2010 使用分散电场法对固体介电材料抗树枝状电击穿性进行评估的标准试验方法
This is a laboratory test designed to simulate the effects of (1) the presence of rough interfaces between conductor
Standard Test Method for Evaluation of Resistance to Electrical Breakdown by Treeing in Solid Dielectric Materials Using Diverging Fields
GB/T 9534-1988 毫米波频段固体电介质材料介电特性测试方法 准光腔法
本标准采用光学腔，即半共焦准光腔作为测试腔体来测试固体电介质的介电特性。 本标准适用于可加工成片状的固体电介质材料
Test method for complex permittivity of solid dielectric materials at millimeter wave frequencies using "Quasi-Optic cavity" technique
GB/T 9533-1988 微波固体电介质材料介电特性测试方法 同轴终端短路法
本标准适用于加工成圆筒状的均匀固体电介质材料的介电常数ε′和损耗角正切tanδ的测试
IEC 49/855/CD:2009 频率控制和选择用压电装置和电介质装置.术语表.第4-2部分:压电材料和电介质材料.压电陶瓷
Piezoelectric and dielectric devices for frequency control and selection - Glossary - Part 4-2: Piezoelectric and dielectric materials - Piezoelectric ceramics
GB/T 11297.11-2015 热释电材料介电常数的测试方法
本部分规定了热释电陶瓷、晶体和有机材料在100 Hz~100 kHz范围介电常数的测试方法。 本部分适用于测量钛酸铅、锆钛酸铅、钛酸锶钡、钽钪酸铅等热释电陶瓷材料和铌镁酸铅、钽酸锂、三甘氨酸硫酸盐族等热释电晶体材料的介电常数，也适用于测量其他类似陶瓷、晶体及有机热释电材料的介电常数
Test method for dielectric constant of pyroelectric materials
编辑：北检院编辑部
