起重滑车检测

SANS 1819-2006 起重滑车

Specifies requirements for snatch blocks intended for use in conjunction with scraper scoops in underground mining operations. Also specifies

Snatch blocks

JB/T 9007-2018 起重滑车

SANS 2972-2018 起重滑车. 检查

Describes the inspection of lifting tackle

Lifting tackle - Inspections

BS 1692:1998 起重滑车规范

This British Standard specifies the design, construction and testing of fibre rope gin blocks for the hoisting and lowering of loads up to 250 kg

Specification for gin blocks

GB 13308-1998 起重滑车 安全要求

本标准规定了对起重滑车的安全要求。 本标准是从物理性能和预定使用方面对起重滑车的限制。 本标准所包含的安全要求是针对起重滑车所有的危险，它适用于如在GB/T 15706.1-1995中所描述的机器寿命其间内各阶段所产生的危险。 本标准适用于机构工作级别为M1～M3级的手动和

Safety requirement for lifting pulley blocks

JB/T 9007.2-1999 起重滑车.技术条件

本标准适用于额定起重量为0.32～320t的手动和电动的钢丝绳起重滑车，其工作级别为GB/T 3811中规定的M1～M3级

Specification for rope pulley blocks

SANS 1820-2006 起重滑车的修复

Specifies requirements for the reconditioning of snatch blocks to meet the requirements of SANS 1819

Reconditioned snatch blocks

JB/T 9007.1-1999 起重滑车.型式、基本参数和尺寸

本标准适用于额定起重量为0.32～320t的手动和电动的钢丝绳起重滑车，其工作级别为GB/T 3811中规定的M1～M3级。本标准的吊钩采用JB/T 4207中的S级

Rope pulley blocks.Types, parameters and dimensions

CSN 27 0601-1987 安全技术．电气起重滑车．一般要求．

Schválenie ST SEV 1727-86 odporu?il Slovensk? ú?ad bezpe?nosti práce SpracovateF: Inspektorát bezpe?nosti práce Bratislava, pracovník: Ing. Peter Ga

Safety technique. Electrical pulley tackles. General requirements.

SC/T 8011-1994 渔船起重钢索滑车

本标准规定了渔船起重钢索滑车的分类、技术要求、试验方法和检验规则． 本标准适用于渔船起重钢索滑车的制造和验收

SAE J881-1985 起重吊车滑轮和鼓轮尺寸

This SAE Standard covers minimum dimensional relations for sheaves, drums, and wire rope

Lifting Crane Sheave and Drum Sizes

SAE J881-2013 起重吊车滑轮和鼓轮尺寸

This SAE Standard covers minimum dimensional relations for sheaves, drums, and wire rope for mobile, construction type lift cranes

Lifting Crane Sheave and Drum Sizes

DIN 15417:1982 起重机.下滑车.带滑动轴承的D型绳索轮

Cranes; bottom hook blocks; wire rope sheaves of forme D with plain bearings Apparells de levage; moufles; poulies à c?ble de la forme D avec glissi

Cranes; bottom blocks; type D rope pulleys with plain bearings

DIN 15413:1983 起重机的下滑车.提升吊钩螺母

Bottom hook blocks, hook nuts for cranesMoufles, ecrous du crochet pour appareils de levage

Bottom blocks for lifting appliances; lifting hook nuts

DIN 15408:1982 起重机.双滑轮下滑车.组件

Cranes; arrangement of bottom hook blocks with two sheaves for wire ropes Grues; ensemble des moufles à deux poulies à c?ble

Cranes; twin sheave bottom blocks; assembly

SANS 1819-2006 起重滑车

Specifies requirements for snatch blocks intended for use in conjunction with scraper scoops in underground mining operations. Also specifies

Snatch blocks

JB/T 9007-2018 起重滑车

SANS 2972-2018 起重滑车. 检查

Describes the inspection of lifting tackle

Lifting tackle - Inspections

BS 1692:1998 起重滑车规范

This British Standard specifies the design, construction and testing of fibre rope gin blocks for the hoisting and lowering of loads up to 250 kg

Specification for gin blocks

GB 13308-1998 起重滑车 安全要求

本标准规定了对起重滑车的安全要求。 本标准是从物理性能和预定使用方面对起重滑车的限制。 本标准所包含的安全要求是针对起重滑车所有的危险，它适用于如在GB/T 15706.1-1995中所描述的机器寿命其间内各阶段所产生的危险。 本标准适用于机构工作级别为M1～M3级的手动和

Safety requirement for lifting pulley blocks

JB/T 9007.2-1999 起重滑车.技术条件

本标准适用于额定起重量为0.32～320t的手动和电动的钢丝绳起重滑车，其工作级别为GB/T 3811中规定的M1～M3级

Specification for rope pulley blocks

SANS 1820-2006 起重滑车的修复

Specifies requirements for the reconditioning of snatch blocks to meet the requirements of SANS 1819

Reconditioned snatch blocks

JB/T 9007.1-1999 起重滑车.型式、基本参数和尺寸

本标准适用于额定起重量为0.32～320t的手动和电动的钢丝绳起重滑车，其工作级别为GB/T 3811中规定的M1～M3级。本标准的吊钩采用JB/T 4207中的S级

Rope pulley blocks.Types, parameters and dimensions

CSN 27 0601-1987 安全技术．电气起重滑车．一般要求．

Schválenie ST SEV 1727-86 odporu?il Slovensk? ú?ad bezpe?nosti práce SpracovateF: Inspektorát bezpe?nosti práce Bratislava, pracovník: Ing. Peter Ga

Safety technique. Electrical pulley tackles. General requirements.

SC/T 8011-1994 渔船起重钢索滑车

本标准规定了渔船起重钢索滑车的分类、技术要求、试验方法和检验规则． 本标准适用于渔船起重钢索滑车的制造和验收

SAE J881-1985 起重吊车滑轮和鼓轮尺寸

This SAE Standard covers minimum dimensional relations for sheaves, drums, and wire rope

Lifting Crane Sheave and Drum Sizes

SAE J881-2013 起重吊车滑轮和鼓轮尺寸

This SAE Standard covers minimum dimensional relations for sheaves, drums, and wire rope for mobile, construction type lift cranes

Lifting Crane Sheave and Drum Sizes

DIN 15417:1982 起重机.下滑车.带滑动轴承的D型绳索轮

Cranes; bottom hook blocks; wire rope sheaves of forme D with plain bearings Apparells de levage; moufles; poulies à c?ble de la forme D avec glissi

Cranes; bottom blocks; type D rope pulleys with plain bearings

DIN 15413:1983 起重机的下滑车.提升吊钩螺母

Bottom hook blocks, hook nuts for cranesMoufles, ecrous du crochet pour appareils de levage

Bottom blocks for lifting appliances; lifting hook nuts

DIN 15408:1982 起重机.双滑轮下滑车.组件

Cranes; arrangement of bottom hook blocks with two sheaves for wire ropes Grues; ensemble des moufles à deux poulies à c?ble

Cranes; twin sheave bottom blocks; assembly