PE管材和原料检测

GB/T 19809-2005 塑料管材和管件 聚乙烯(PE)管材/管材或管材/管件热熔对接组件的制备

本标准规定了聚乙烯管材与管材或管材与管件插口端热熔对接组件的制备方法。 考虑到相关产品尺寸中规定的使用限制条件和所用管材的类型，本标准规定了焊接参数，如环境温度、接头几何尺寸和熔接参数等。 焊接环境的不同会影响到待测组件的连接性能。根据生产商的说明书和/或相关标准，制备

Plastics pipes and fittings.Preparation of polyethylene(PE)pipe/pipe or pipe/fitting test piece assemblies by butt fusion

ASTM D3261-16 聚乙烯（PE）塑料管和管材的对接热融聚乙烯（PE）塑料配件的标准规范

Standard Specification for Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plastic Pipe and Tubing

ASTM D3261-10 聚乙烯（PE）塑料管和管材的对接热融聚乙烯（PE）塑料配件的标准规范

Standard Specification for Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plastic Pipe and Tubing

PPI TN-41-2007 水管用高性能聚乙烯(PE)材料

High Performance PE Materials for Water Piping Applications

ISO 11414:1996 塑料管材和管件 用对熔连接的聚乙烯(PE)管材/管材或管材/管件组装试样的制备

Describes a procedure for preparing butt-fusion-jointed test piece assemblies between polyethylene (PE) pipes and spigot-ended fittings. Specifies

Plastics pipes and fittings - Preparation of polyethylene (PE) pipe/pipe or pipe/fitting test piece assemblies by butt fusion

GB/T 19712-2005 塑料管材和管件 聚乙烯(PE)鞍形旁通抗冲击试验方法

本标准规定了测定聚乙烯鞍形旁通抗冲击性能的一种试验方法。 本标准适用于流体输送用聚乙烯鞍形旁通

Plastics pipes and fittings Polyethylene(PE) tapping tees Test method for impact resistance

SFS 5103-1985 塑料管．压力PE-下水管和管连接

T?m? standardi koskee sileit? polyeteenist? (PE) valmistettuja muhvillisia ja muhvittomia viem?riputkia ja ruiskupuristettuja tai ainesputkesta

ASTM F1282-06 聚乙烯/铝/聚乙烯(PE-AL-PE)复合材料压力管的标准规范

1.1 This specification covers a coextruded polyethylene composite pressure pipe with a welded aluminum tube reinforcement between the inner

Standard Specification for Polyethylene/Aluminum/Polyethylene (PE-AL-PE) Composite Pressure Pipe

GB/T 32434-2015 塑料管材和管件 燃气和给水输配系统用聚乙烯(PE)管材及管件的热熔对接程序

ISO 11413:1996 塑料管材和管件 聚乙烯(PE)管和电熔配件的组装试件的制备

Specifies a method for the preparation of test pieces assembled from polyethylene pipes or spigot-ended fittings and electrofusion fittings

Plastics pipes and fittings - Preparation of test piece assemblies between a polyethylene (PE) pipe and an electrofusion fitting

GB/T 13663-2000 给水用聚乙烯(PE)管材

本标准规定了用聚乙烯树脂为主要原料的材料，经挤出成型的给水用聚乙烯管材（以下简称“管材’)的产品规格、技术要求、试验方法、检验规则、标志、包装、运输、贮存。本标准还规定了原料的基本性能要求，包括分类体系。 本标准适用于用PE 63、PE 80和PE 100材料（见4.1）制造的给水

Polyethylene pipes for water supply

BS DD CEN/TS 14541:2007 非压力设备用塑料管道和配件.非原态硬聚氯乙烯(PVC-U),聚丙烯(PP)和聚乙烯(PE)材料应用

This document specifies definitions and recommended specifications and test methods for the utilisation of PVC-U, PP and PE non-virgin materials

Plastics pipes and fittings for non-pressure applications. Utilisation of non-virgin PVC-U, PP and PE materials

ISO 13957:1997 塑料管材和管件 聚乙烯(PE)鞍型三通 耐冲击试验方法

This International Standard specifies a test method for the impact resistance of polyethylene (PE) tapping tees. This International Standard

Plastics pipes and fittings - Polyethylene (PE) tapping tees - Test method for impact resistance

QB/T 4132-2010 给水用聚乙烯(PE)管材混配料用炭黑母粒

本标准规定了给水用聚乙烯（PE）管材混配料用炭黑母粒的分级和命名、主要原料、通用要求、技术指标、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于以碳黑、抗氧剂及聚乙烯树脂为主要原料的炭黑母粒。 该炭黑母粒可用于制造给水用聚乙烯（PE）管材混配料

Carbon black masterbatch for the compound of polyethlene pipes for water supply

IPC PE-740A SECTION 4-1997 基层材料

The purpose of this Handbook is to provide guidance in the form of troubleshooting

Base Materials

GB/T 19809-2005 塑料管材和管件 聚乙烯(PE)管材/管材或管材/管件热熔对接组件的制备

本标准规定了聚乙烯管材与管材或管材与管件插口端热熔对接组件的制备方法。 考虑到相关产品尺寸中规定的使用限制条件和所用管材的类型，本标准规定了焊接参数，如环境温度、接头几何尺寸和熔接参数等。 焊接环境的不同会影响到待测组件的连接性能。根据生产商的说明书和/或相关标准，制备

Plastics pipes and fittings.Preparation of polyethylene(PE)pipe/pipe or pipe/fitting test piece assemblies by butt fusion

ASTM D3261-16 聚乙烯（PE）塑料管和管材的对接热融聚乙烯（PE）塑料配件的标准规范

Standard Specification for Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plastic Pipe and Tubing

ASTM D3261-10 聚乙烯（PE）塑料管和管材的对接热融聚乙烯（PE）塑料配件的标准规范

Standard Specification for Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plastic Pipe and Tubing

PPI TN-41-2007 水管用高性能聚乙烯(PE)材料

High Performance PE Materials for Water Piping Applications

ISO 11414:1996 塑料管材和管件 用对熔连接的聚乙烯(PE)管材/管材或管材/管件组装试样的制备

Describes a procedure for preparing butt-fusion-jointed test piece assemblies between polyethylene (PE) pipes and spigot-ended fittings. Specifies

Plastics pipes and fittings - Preparation of polyethylene (PE) pipe/pipe or pipe/fitting test piece assemblies by butt fusion

GB/T 19712-2005 塑料管材和管件 聚乙烯(PE)鞍形旁通抗冲击试验方法

本标准规定了测定聚乙烯鞍形旁通抗冲击性能的一种试验方法。 本标准适用于流体输送用聚乙烯鞍形旁通

Plastics pipes and fittings Polyethylene(PE) tapping tees Test method for impact resistance

SFS 5103-1985 塑料管．压力PE-下水管和管连接

T?m? standardi koskee sileit? polyeteenist? (PE) valmistettuja muhvillisia ja muhvittomia viem?riputkia ja ruiskupuristettuja tai ainesputkesta

ASTM F1282-06 聚乙烯/铝/聚乙烯(PE-AL-PE)复合材料压力管的标准规范

1.1 This specification covers a coextruded polyethylene composite pressure pipe with a welded aluminum tube reinforcement between the inner

Standard Specification for Polyethylene/Aluminum/Polyethylene (PE-AL-PE) Composite Pressure Pipe

GB/T 32434-2015 塑料管材和管件 燃气和给水输配系统用聚乙烯(PE)管材及管件的热熔对接程序

ISO 11413:1996 塑料管材和管件 聚乙烯(PE)管和电熔配件的组装试件的制备

Specifies a method for the preparation of test pieces assembled from polyethylene pipes or spigot-ended fittings and electrofusion fittings

Plastics pipes and fittings - Preparation of test piece assemblies between a polyethylene (PE) pipe and an electrofusion fitting

GB/T 13663-2000 给水用聚乙烯(PE)管材

本标准规定了用聚乙烯树脂为主要原料的材料，经挤出成型的给水用聚乙烯管材（以下简称“管材’)的产品规格、技术要求、试验方法、检验规则、标志、包装、运输、贮存。本标准还规定了原料的基本性能要求，包括分类体系。 本标准适用于用PE 63、PE 80和PE 100材料（见4.1）制造的给水

Polyethylene pipes for water supply

BS DD CEN/TS 14541:2007 非压力设备用塑料管道和配件.非原态硬聚氯乙烯(PVC-U),聚丙烯(PP)和聚乙烯(PE)材料应用

This document specifies definitions and recommended specifications and test methods for the utilisation of PVC-U, PP and PE non-virgin materials

Plastics pipes and fittings for non-pressure applications. Utilisation of non-virgin PVC-U, PP and PE materials

ISO 13957:1997 塑料管材和管件 聚乙烯(PE)鞍型三通 耐冲击试验方法

This International Standard specifies a test method for the impact resistance of polyethylene (PE) tapping tees. This International Standard

Plastics pipes and fittings - Polyethylene (PE) tapping tees - Test method for impact resistance

QB/T 4132-2010 给水用聚乙烯(PE)管材混配料用炭黑母粒

本标准规定了给水用聚乙烯（PE）管材混配料用炭黑母粒的分级和命名、主要原料、通用要求、技术指标、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于以碳黑、抗氧剂及聚乙烯树脂为主要原料的炭黑母粒。 该炭黑母粒可用于制造给水用聚乙烯（PE）管材混配料

Carbon black masterbatch for the compound of polyethlene pipes for water supply

IPC PE-740A SECTION 4-1997 基层材料

The purpose of this Handbook is to provide guidance in the form of troubleshooting

Base Materials