GB/T 18251-2000 聚烯烃管材、管件和混配料中颜料或炭黑分散的测定方法
本标准规定了聚烯烃管材、管件和混配料中颜料或炭黑分散的测定方法。 本标准适用于聚烯烃管材、管件和混配料。测定炭黑时，本标准适用于炭黑含量小于3%（质量）的聚烯烃管材、管件和混配料
Method for the assessment of pigment or carbon black dispersion in polyolefin pipes,fittings and compounds
GB/T 8804.3-2003 热塑性塑料管材 拉伸性能测定 第3部分;聚烯烃管材
GB／T 8804的本部分规定了聚烯烃(聚乙烯、交联聚乙烯、聚丙烯和聚丁烯)热塑性塑料管材的拉伸性能的试验方法，特别是下列性质： ——拉伸屈服应力； ——断裂伸长率。 本部分适用于各种用途的聚烯烃管材。 注1：管材熔焊处的性能可以通过本文献中介绍的机械an：I：试样测定； 注2：热塑性管材
Thermoplastic pipes--Determination of tensile properties--Part 3: Polyolefin pipes
ISO 6259-3:2015 热塑性塑料管.拉伸性能的测定.第3部分:聚烯烃管材
Thermoplastics pipes - Determination of tensile properties - Part 3: Polyolefin pipes
ISO 6259-3:1997 热塑性塑料管 拉伸性能的测定 第3部分:聚烯烃管材
This part of ISO 6259 specifies a method of determining the tensile properties of polyolefin (polyethylene, cross-linked polyethylene, polypropylene
Thermoplastic pipes - Determination of tensile properties - Part 3: Polyolefin pipes
GB/T 18251-2019 聚烯烃管材、管件和混配料中颜料或炭黑分散度的测定
Method for the assessment of the degree of pigment or carbon black dispersion in polyolefin pipes, fittings and compounds
GOST R ISO 18553:2013 聚烯烃管材, 管件和化合物. 颜料或炭黑分散度的评估方法
Polyolefin pipes, fittings and compounds. Method for the assessment of the degree of pigment or carbon black dispersion
ISO 4433-2:1997 热塑性塑料管 耐液体化学药品 分类 第2部分:聚烯烃管材
The method of classification given in this part of ISO 4433 serves to determine the chemical resistance of polyolefin pipes designed
Thermoplastics pipes - Resistance to liquid chemicals - Classification - Part 2: Polyolefin pipes
EN ISO 6259-3:2015 热塑性塑料管材.拉伸性能的测定.第3部分:聚烯烃管材(ISO 6259-3:2015)
Der vorliegende Teil von ISO 6259 legt ein Verfahren zur Bestimmung der Zugeigenschaften von Polyolefin-Rohren (Polyethylen, vernetztes Polyethylen
Thermoplastics pipes - Determination of tensile properties - Part 3: Polyolefin pipes (ISO 6259-3:2015)
ISO 6964:1986 聚烯烃管材和管件 用热失重法测定碳黑含量 试验方法和基本规范
The determination is carried out by pyrolysis of a test portion at 550 鳦 in nitrogen followd by a calcination in a muffle furnace at 900 鳦. The carbon
Polyolefin pipes and fittings; Determination of carbon black content by calcination and pyrolysis; Test method and basic specification
STAS SR ISO 6964:1995 聚烯烃管材和管件．用热失重法测定碳黑含量．试验方法和基本规范
Prezentul Standard Interna?ional stabile?te metoda de ?ncercare pentru determinarea con?inutului de negru de fum al amestecurilor pe baz? de
Poiyoiefin pipes and fittings - Determination of carbon black by calclnatlon and pyrolysis - Test method and basic spec?fication
ISO 13479:2009 流体输送用聚烯烃管材.耐裂纹扩展的测定.切口管材裂纹慢速增长的试验方法
Polyolefin pipes for the conveyance of fluids - Determination of resistance to crack propagation - Test method for slow crack growth on notched pipes
GB/T 18476-2001 流体输送用聚烯烃管材 耐裂纹扩展的测定 切口管材裂纹慢速增长的试验方法(切口试验)
本标准规定了测定聚烯烃管材耐裂纹慢速增长的一种试验方法。管材耐裂纹慢速增长的能力用切口管材静液压试验的破坏时间来表示。 本标准适用于壁厚大于5mm的聚烯烃管材
Polyolefin pipes for the conveyance of fluids--Determination of resistance to crack propagation-Test method for slow crack growth on notched pipes(notch test)
GB/T 18476-2019 流体输送用聚烯烃管材 耐裂纹扩展的测定 慢速裂纹增长的试验方法（切口试验）
Polyolefin pipes for the conveyance of fluids—Determination of resistance to crack propagation—Test method for slow crack growth(notch test)
DIN EN ISO 6259-3:2015 热塑性塑料管.拉伸性能的测定.第3部分:聚烯烃管材(ISO 6259-3-2015);德文版本EN ISO 6259-3-2015
Thermoplastics pipes - Determination of tensile properties - Part 3: Polyolefin pipes (ISO 6259-3:2015); German version EN ISO 6259-3:2015
EN ISO 13479:2022 流体输送用聚烯烃管材.抗裂纹扩展的测定.切口管材慢速裂纹增长的试验方法(切口试验)
This document specifies a test method for determining the resistance to slow crack growth of polyolefin pipes, expressed in terms of time to failure
Polyolefin pipes for the conveyance of fluids - Determination of resistance to crack propagation - Test method for slow crack growth on notched pipes (ISO 13479:2022)
GB/T 18251-2000 聚烯烃管材、管件和混配料中颜料或炭黑分散的测定方法
本标准规定了聚烯烃管材、管件和混配料中颜料或炭黑分散的测定方法。 本标准适用于聚烯烃管材、管件和混配料。测定炭黑时，本标准适用于炭黑含量小于3%（质量）的聚烯烃管材、管件和混配料
Method for the assessment of pigment or carbon black dispersion in polyolefin pipes,fittings and compounds
GB/T 8804.3-2003 热塑性塑料管材 拉伸性能测定 第3部分;聚烯烃管材
GB／T 8804的本部分规定了聚烯烃(聚乙烯、交联聚乙烯、聚丙烯和聚丁烯)热塑性塑料管材的拉伸性能的试验方法，特别是下列性质： ——拉伸屈服应力； ——断裂伸长率。 本部分适用于各种用途的聚烯烃管材。 注1：管材熔焊处的性能可以通过本文献中介绍的机械an：I：试样测定； 注2：热塑性管材
Thermoplastic pipes--Determination of tensile properties--Part 3: Polyolefin pipes
ISO 6259-3:2015 热塑性塑料管.拉伸性能的测定.第3部分:聚烯烃管材
Thermoplastics pipes - Determination of tensile properties - Part 3: Polyolefin pipes
ISO 6259-3:1997 热塑性塑料管 拉伸性能的测定 第3部分:聚烯烃管材
This part of ISO 6259 specifies a method of determining the tensile properties of polyolefin (polyethylene, cross-linked polyethylene, polypropylene
Thermoplastic pipes - Determination of tensile properties - Part 3: Polyolefin pipes
GB/T 18251-2019 聚烯烃管材、管件和混配料中颜料或炭黑分散度的测定
Method for the assessment of the degree of pigment or carbon black dispersion in polyolefin pipes, fittings and compounds
GOST R ISO 18553:2013 聚烯烃管材, 管件和化合物. 颜料或炭黑分散度的评估方法
Polyolefin pipes, fittings and compounds. Method for the assessment of the degree of pigment or carbon black dispersion
ISO 4433-2:1997 热塑性塑料管 耐液体化学药品 分类 第2部分:聚烯烃管材
The method of classification given in this part of ISO 4433 serves to determine the chemical resistance of polyolefin pipes designed
Thermoplastics pipes - Resistance to liquid chemicals - Classification - Part 2: Polyolefin pipes
EN ISO 6259-3:2015 热塑性塑料管材.拉伸性能的测定.第3部分:聚烯烃管材(ISO 6259-3:2015)
Der vorliegende Teil von ISO 6259 legt ein Verfahren zur Bestimmung der Zugeigenschaften von Polyolefin-Rohren (Polyethylen, vernetztes Polyethylen
Thermoplastics pipes - Determination of tensile properties - Part 3: Polyolefin pipes (ISO 6259-3:2015)
ISO 6964:1986 聚烯烃管材和管件 用热失重法测定碳黑含量 试验方法和基本规范
The determination is carried out by pyrolysis of a test portion at 550 鳦 in nitrogen followd by a calcination in a muffle furnace at 900 鳦. The carbon
Polyolefin pipes and fittings; Determination of carbon black content by calcination and pyrolysis; Test method and basic specification
STAS SR ISO 6964:1995 聚烯烃管材和管件．用热失重法测定碳黑含量．试验方法和基本规范
Prezentul Standard Interna?ional stabile?te metoda de ?ncercare pentru determinarea con?inutului de negru de fum al amestecurilor pe baz? de
Poiyoiefin pipes and fittings - Determination of carbon black by calclnatlon and pyrolysis - Test method and basic spec?fication
ISO 13479:2009 流体输送用聚烯烃管材.耐裂纹扩展的测定.切口管材裂纹慢速增长的试验方法
Polyolefin pipes for the conveyance of fluids - Determination of resistance to crack propagation - Test method for slow crack growth on notched pipes
GB/T 18476-2001 流体输送用聚烯烃管材 耐裂纹扩展的测定 切口管材裂纹慢速增长的试验方法(切口试验)
本标准规定了测定聚烯烃管材耐裂纹慢速增长的一种试验方法。管材耐裂纹慢速增长的能力用切口管材静液压试验的破坏时间来表示。 本标准适用于壁厚大于5mm的聚烯烃管材
Polyolefin pipes for the conveyance of fluids--Determination of resistance to crack propagation-Test method for slow crack growth on notched pipes(notch test)
GB/T 18476-2019 流体输送用聚烯烃管材 耐裂纹扩展的测定 慢速裂纹增长的试验方法（切口试验）
Polyolefin pipes for the conveyance of fluids—Determination of resistance to crack propagation—Test method for slow crack growth(notch test)
DIN EN ISO 6259-3:2015 热塑性塑料管.拉伸性能的测定.第3部分:聚烯烃管材(ISO 6259-3-2015);德文版本EN ISO 6259-3-2015
Thermoplastics pipes - Determination of tensile properties - Part 3: Polyolefin pipes (ISO 6259-3:2015); German version EN ISO 6259-3:2015
EN ISO 13479:2022 流体输送用聚烯烃管材.抗裂纹扩展的测定.切口管材慢速裂纹增长的试验方法(切口试验)
This document specifies a test method for determining the resistance to slow crack growth of polyolefin pipes, expressed in terms of time to failure
Polyolefin pipes for the conveyance of fluids - Determination of resistance to crack propagation - Test method for slow crack growth on notched pipes (ISO 13479:2022)
编辑：北检院编辑部
