电工电子产品及军用装备、火工品检测

📅 发布时间:2024-05-27 👤 来源:北检院 👁 阅读:

GJB 5159-2004 军工产品定型电子文件要求

GOST 24686-1981 电子技术及电工制品生产用设备.一般技术要求

Equipment for manufacture of electronic and electrical products. General technical requirements. Marking, packing, transportation and preservation

GB/T 30085-2013 工业系统、装置和设备及工业产品 电缆和电线的标记

本标准规定了用于工业装置、设备及产品用电缆、绝缘线芯/导体的标记规则和方法,标记是为了给出技术文件和实际设备之间的明确对应关系及其他目的。规定并描述了以下方法:a) 带颜色的电缆及带标志的绝缘线芯的使用;b) 附加标识标记;c) 附加连接标记;d) 附加信号标记。本标准适用于工业装置、设备及产品用电

Industrial systems, installations and equipment and industrial products.Labelling of cables and cores

GB/T 5169.18-2005 电工电子产品着火危险试验 第18部分;将电工电子产品的火灾中毒危险减至最小的导则 总则

GB/T 5169的本部分给出了将电工电子产品在火灾中产生的有毒气体减至最少的方法及其应用导则。这些方法由ISO/TC 92的SC3推荐,列在ISO/TR 9122第1-6部分的附录A的第7种参考文件中

Fire hazard testing for electric and electronic products-part 18:Guidance on the minimization of toxic harzards due to fire involving electric and electronic products-General

IEC 62491:2008 工业系统、装置和设备及工业产品.电缆和电线的标签

This standard provides rules and guidelines for the labelling of cables and cores/conductors used in industrial installations, equipment and products

Industrial systems, installations and equipment and industrial products - Labelling of cables and cores

DIN EN 62491:2009 工业系统、装置和设备及工业产品 电缆和电线的标签

Industrial systems, installations and equipment and industrial products - Labelling of cables and cores (IEC 62491:2008); German version EN 62491:2008

BS EN 62491:2008 工业系统、装置和设备及工业产品.电缆和电线的标签

This standard provides rules and guidelines for the labelling of cables and cores/conductors used in industrial installations, equipment and products

Industrial systems, installations and equipment and industrial products - Labelling of cables and cores

HB 7262.1-1995 航空产品电装工艺.电子元器件的安装

本标准规定了航空产品的中、低频电路电子元器件的安装技术要求和方法。   本标准适用于航空产品的电子装配

KS C 0261-1995 电工·电子产品着火危险试验.针焰试验

이 규격은 시뮬레이션 기술을 이용하여 화재를 예측하기 위하여 장치 내의 고장에 기인하는

Fire hazard testing Part 2:Test methods Section 2:Needle-flame test

KS C 0296-1999 电工电子产品着火危险试验.耐火性试验:电工电子产品的燃烧排放有毒物质危害最低化导则

이 규격은 부속서 1의 참고 문헌 (6)의 ISO TR 9122­1∼6과 같이 전기ㆍ전자

Fire hazard testing Part 7:Guidance on the minimization of toxic hazards due to fires involving electrotechnical products Section 1:General

NF C04-002*NF EN 62491:2008 工业系统、装置和设备及工业产品 电缆和电缆芯的标注

Industrial systems, installations and equipment and industrial products - Labelling of cables and cores

KS C 0295-2004 电工电子产品着火危险试验.耐火性试验:500W标准火焰试验及导则

이 규격은 공칭 500 W 혼합 시험용 불꽃을 만드는 방법에 대한 상세한 요구 사항을 정한

Fire hazard testing-Part 11-3:Test flames-500 W flames-Apparatus and confirmational test methods

DIN-Fachbericht IEC/PAS 61906:2008 电工产品和电子工业产品的材料申报程序

Procedure for the declaration of materials in products of the electrotechnical and electronic industry; German version IEC/PAS 61906:2005

GB/T 4798.6-1996 电工电子产品应用环境条件 船用

本标准的这部分对安装在船舶上的产品所承受的环境参数及其严酷程度作了分级。这些产品可长期地或暂时地安装在下述船舶上: 由机械方式推进的船舶,包括移动式海上平台; 非机械方式推进的船舶,包括帆船和救生筏。 所规定的等级适用于从游艇到拖网渔船、渡船、破冰船、货船(包括油船)等各种

Environmental conditions existing in the application of electric and electronic products--Ship environment

GB/T 5169.1-2007 电工电子产品着火危险试验 第1部分:着火试验术语

本部分规定的术语和定义适用于电工电子产品的着火危险试验

Fire hazard testing for electric and eletronic products.Part 1:Terminology concerning fire tests

GJB 5159-2004 军工产品定型电子文件要求

GOST 24686-1981 电子技术及电工制品生产用设备.一般技术要求

Equipment for manufacture of electronic and electrical products. General technical requirements. Marking, packing, transportation and preservation

GB/T 30085-2013 工业系统、装置和设备及工业产品 电缆和电线的标记

本标准规定了用于工业装置、设备及产品用电缆、绝缘线芯/导体的标记规则和方法,标记是为了给出技术文件和实际设备之间的明确对应关系及其他目的。规定并描述了以下方法:a) 带颜色的电缆及带标志的绝缘线芯的使用;b) 附加标识标记;c) 附加连接标记;d) 附加信号标记。本标准适用于工业装置、设备及产品用电

Industrial systems, installations and equipment and industrial products.Labelling of cables and cores

GB/T 5169.18-2005 电工电子产品着火危险试验 第18部分;将电工电子产品的火灾中毒危险减至最小的导则 总则

GB/T 5169的本部分给出了将电工电子产品在火灾中产生的有毒气体减至最少的方法及其应用导则。这些方法由ISO/TC 92的SC3推荐,列在ISO/TR 9122第1-6部分的附录A的第7种参考文件中

Fire hazard testing for electric and electronic products-part 18:Guidance on the minimization of toxic harzards due to fire involving electric and electronic products-General

IEC 62491:2008 工业系统、装置和设备及工业产品.电缆和电线的标签

This standard provides rules and guidelines for the labelling of cables and cores/conductors used in industrial installations, equipment and products

Industrial systems, installations and equipment and industrial products - Labelling of cables and cores

DIN EN 62491:2009 工业系统、装置和设备及工业产品 电缆和电线的标签

Industrial systems, installations and equipment and industrial products - Labelling of cables and cores (IEC 62491:2008); German version EN 62491:2008

BS EN 62491:2008 工业系统、装置和设备及工业产品.电缆和电线的标签

This standard provides rules and guidelines for the labelling of cables and cores/conductors used in industrial installations, equipment and products

Industrial systems, installations and equipment and industrial products - Labelling of cables and cores

HB 7262.1-1995 航空产品电装工艺.电子元器件的安装

本标准规定了航空产品的中、低频电路电子元器件的安装技术要求和方法。   本标准适用于航空产品的电子装配

KS C 0261-1995 电工·电子产品着火危险试验.针焰试验

이 규격은 시뮬레이션 기술을 이용하여 화재를 예측하기 위하여 장치 내의 고장에 기인하는

Fire hazard testing Part 2:Test methods Section 2:Needle-flame test

KS C 0296-1999 电工电子产品着火危险试验.耐火性试验:电工电子产品的燃烧排放有毒物质危害最低化导则

이 규격은 부속서 1의 참고 문헌 (6)의 ISO TR 9122­1∼6과 같이 전기ㆍ전자

Fire hazard testing Part 7:Guidance on the minimization of toxic hazards due to fires involving electrotechnical products Section 1:General

NF C04-002*NF EN 62491:2008 工业系统、装置和设备及工业产品 电缆和电缆芯的标注

Industrial systems, installations and equipment and industrial products - Labelling of cables and cores

KS C 0295-2004 电工电子产品着火危险试验.耐火性试验:500W标准火焰试验及导则

이 규격은 공칭 500 W 혼합 시험용 불꽃을 만드는 방법에 대한 상세한 요구 사항을 정한

Fire hazard testing-Part 11-3:Test flames-500 W flames-Apparatus and confirmational test methods

DIN-Fachbericht IEC/PAS 61906:2008 电工产品和电子工业产品的材料申报程序

Procedure for the declaration of materials in products of the electrotechnical and electronic industry; German version IEC/PAS 61906:2005

GB/T 4798.6-1996 电工电子产品应用环境条件 船用

本标准的这部分对安装在船舶上的产品所承受的环境参数及其严酷程度作了分级。这些产品可长期地或暂时地安装在下述船舶上: 由机械方式推进的船舶,包括移动式海上平台; 非机械方式推进的船舶,包括帆船和救生筏。 所规定的等级适用于从游艇到拖网渔船、渡船、破冰船、货船(包括油船)等各种

Environmental conditions existing in the application of electric and electronic products--Ship environment

GB/T 5169.1-2007 电工电子产品着火危险试验 第1部分:着火试验术语

本部分规定的术语和定义适用于电工电子产品的着火危险试验

Fire hazard testing for electric and eletronic products.Part 1:Terminology concerning fire tests

编辑:北检院编辑部

我们的优势

选择北检院的六大理由

📚

CMA/CNAS 双认证

旗下实验室具备国家认证认可监督管理委员会CMA资质认定及中国合格评定国家认可委员会CNAS实验室认可,检测报告具有国际公信力。

🔬

1000+ 台套先进设备

配备扫描电镜、气质联用仪、电感耦合等离子体质谱仪等国际先进检测仪器,确保数据精准可靠。

🏢

15000+ 平米实验室

拥有规模化专业检测基地,涵盖材料、化工、食品、环境等多个专业实验室,满足多领域检测需求。

👥

资深技术团队

汇聚材料科学、化学分析、环境工程等领域专家,拥有10年+行业经验,提供专业可靠的检测分析服务。

⏱

快速响应机制

标准检测周期短至3个工作日,加急服务24小时出具报告,全程一对一工程师跟进,确保高效交付。

🌎

全国服务网络

总部位于北京,山东设立分部,服务覆盖全国,为20万+客户提供便捷的一站式检测解决方案。

荣誉资质

旗下实验室资质荣誉

CMA 检验检测机构资质认定

CMA 检验检测机构资质认定

国家认证认可监督管理委员会颁发,具备向社会出具具有证明作用数据的资质。

CNAS 实验室认可证书

CNAS 实验室认可证书

中国合格评定国家认可委员会认可,检测结果获国际互认,具有国际公信力。

ISO 质量管理体系认证

ISO 质量管理体系认证

通过ISO 质量管理体系认证,管理体系实现规范化、标准化。

绿色低碳诚信示范创建企业

绿色低碳诚信示范创建企业

荣获绿色低碳诚信示范创建企业称号,践行可持续发展理念,推动绿色低碳转型,助力"双碳"目标实现。

北京市创新型中小企业

北京市"创新型"中小企业

经北京市经济和信息化局认定的创新型中小企业,具备较强创新能力与较高专业化水平,是优质中小企业梯度培育体系的重要基础力量。

北京市专精特新中小企业

北京市"专精特新"中小企业

经北京市经济和信息化局认定的专精特新中小企业,具备专业化、精细化、特色化、新颖化发展特征,在细分领域具有较强竞争优势。

查看全部资质

仪器设备

国际先进检测仪器,确保检测数据精准可靠

查看全部设备

检测流程

标准化流程,高效交付

01

需求沟通

客户提交检测需求,技术顾问一对一沟通,明确检测项目与标准。

➔
02

样品寄送

客户按照规范要求寄送样品,实验室确认样品状态与数量。

➔
03

实验检测

专业工程师按照标准方法进行检测分析,全程质量控制。

➔
04

数据审核

检测数据经多级审核,确保结果准确、可靠、可追溯。

➔
05

报告出具

出具检测报告,支持电子版与纸质版,快递送达。

VR实验室720°全景 NEW · 全新上线 VR实验室上线啦! 720°全景实景观览 · 足不出户走进实验室 立即体验 检测咨询 · 立即在线沟通