UL 98-2004 封闭式开关和不露带电部分的开关
Proposed Revisions to the Thirteenth Edition of the Trinational Standard for Enclosed and Dead-Front Switches, UL 98
UL Standard for Safety Enclosed and Dead-Front Switches (Thirteenth Edition; Reprint with revisions through and including October 10@ 2014)
BS EN 60309-4:2007 工业用插头、插座端口和连接件.带或不带互锁的开关插座端口和连接器
This clause of Part 1 or Part 2 is applicable except as follows: Replacement of the first paragraph by the following text: This part of IEC 60309
Plugs, socket-outlets and couplers for industrial purposes - Switched socket-outlets and connectors, with or without interlock
NF C63-314*NF EN 60309-4:2007 工业用插头、插座和连接器 第4部分：带或不带互锁的开关插座和连接器
Plugs, socket-outlets and couplers for industrial purposes - Part 4 : switched socket-outlet and connector, with or without interlock
SANS 60309-4-2006 工业用插头，插座和联结器．第4部分：带或不带联锁的开关式插座和连接器
Applies to self-contained products that combine within a single enclosure, a socket-outlet or connector in accordance with IEC 60309-1 or IEC 60309-2
Plugs, socket-outlets and couplers for industrial purposes Part 4: Switched socket-outlets and connectors with or without interlock
TS 803-1969 带载负抽头变换开关
ON - LOAD TAP - CHANGERS
KS C IEC 60309-4-2014(2019 插头 插座和耦合器用于工业目的 - 第4部分:开关插座和连接器或不带互锁
Plugs, socket-outlets and couplers for industrial purposes — Part 4: Switched socket-outlets and connectors with or without interlock
NAVY MIL-DTL-24788 A-2008 带或不带连续开关的快速断开燃料半干断开连接组件
COUPLING ASSEMBLY, SEMI-DRY-BREAK, QUICK-DISCONNECT FUEL WITH OR WITHOUT CONTINUITY SWITCH
UL 98-1994 包封并且正面不带电的开关
UL Standard for Safety Enclosed and Dead-Front Switches (Twelfth Edition; Reprint with Revisions Through and Including October 03@ 1995)
NEMA PB 2-2011 不露带电部分的配电开关板
Deadfront Distribution Switchboards
JIS C8308-1988 带盖闸刀开关
Knife switches with cover
IEC 60214:1989 带载分接开关
On-load tap-changers
GB/T 11918.4-2014 工业用插头插座和耦合器 第4部分:有或联锁带开关的插座和连接器
GB/T 11918.1-2014的本章经如下修改后适用:第一段和第二段用以下内容替换:GB/T 11918的本部分规定了工业用的有或联锁带开关的插座和连接器的防触电保护、联锁、开关及其元件、结构、机械强度、电气性能等技术要求。本部分适用于主要作工业用途的、户内或户外使用的额定工作电压不超过1
Plugs, socket-outlets and couplers for industrial purposes.Part 4:Switched socket-outlets and connectors with or without interlock
DIN 71802:1992-04 带开口簧环或不带开口簧环的球形接头
The dimensions are given for ball joints consisting of ball studs and their housings. Furthermore, requirements are given for corrosion
Ball joints with or without circlips
GB 2099.5-2008 家用和类似用途插头插座.第2部分:固定式有联锁带开关插座的特殊要求
GB 2099.1的本章做下列修改后适用。 GB 2099的本部分适用于家电和类似用途供户内或户外用的、带或不带接地触头的、额定电压50V以上但不超过440V、额定电流不超过32A的交流固定式有联锁带开关插座。 符合本部分的有联锁带开关插座，由符合GB 2099.1的插座和符合GB
Plugs and socket-outlets for household and similar purposes.Part 2:Particular requirements for switched socket-outlets with interlock for fixed installations
JB/T 10434.2-2004 家用和类似用途插头插座.第2部分:固定式连锁带开关插座的特殊要求
本标准适用于家用和类似用途供户内户外用的、带或不带接地触头、额定电压不超过440V、额定电流不超过32A的交流固定式带开关的插座
Plugs and socket-outlets for household and similar purposes Part 2:Particular requirements for switched socket-outlets without interlock for fixed installations
UL 98-2004 封闭式开关和不露带电部分的开关
Proposed Revisions to the Thirteenth Edition of the Trinational Standard for Enclosed and Dead-Front Switches, UL 98
UL Standard for Safety Enclosed and Dead-Front Switches (Thirteenth Edition; Reprint with revisions through and including October 10@ 2014)
BS EN 60309-4:2007 工业用插头、插座端口和连接件.带或不带互锁的开关插座端口和连接器
This clause of Part 1 or Part 2 is applicable except as follows: Replacement of the first paragraph by the following text: This part of IEC 60309
Plugs, socket-outlets and couplers for industrial purposes - Switched socket-outlets and connectors, with or without interlock
NF C63-314*NF EN 60309-4:2007 工业用插头、插座和连接器 第4部分：带或不带互锁的开关插座和连接器
Plugs, socket-outlets and couplers for industrial purposes - Part 4 : switched socket-outlet and connector, with or without interlock
SANS 60309-4-2006 工业用插头，插座和联结器．第4部分：带或不带联锁的开关式插座和连接器
Applies to self-contained products that combine within a single enclosure, a socket-outlet or connector in accordance with IEC 60309-1 or IEC 60309-2
Plugs, socket-outlets and couplers for industrial purposes Part 4: Switched socket-outlets and connectors with or without interlock
TS 803-1969 带载负抽头变换开关
ON - LOAD TAP - CHANGERS
KS C IEC 60309-4-2014(2019 插头 插座和耦合器用于工业目的 - 第4部分:开关插座和连接器或不带互锁
Plugs, socket-outlets and couplers for industrial purposes — Part 4: Switched socket-outlets and connectors with or without interlock
NAVY MIL-DTL-24788 A-2008 带或不带连续开关的快速断开燃料半干断开连接组件
COUPLING ASSEMBLY, SEMI-DRY-BREAK, QUICK-DISCONNECT FUEL WITH OR WITHOUT CONTINUITY SWITCH
UL 98-1994 包封并且正面不带电的开关
UL Standard for Safety Enclosed and Dead-Front Switches (Twelfth Edition; Reprint with Revisions Through and Including October 03@ 1995)
NEMA PB 2-2011 不露带电部分的配电开关板
Deadfront Distribution Switchboards
JIS C8308-1988 带盖闸刀开关
Knife switches with cover
IEC 60214:1989 带载分接开关
On-load tap-changers
GB/T 11918.4-2014 工业用插头插座和耦合器 第4部分:有或联锁带开关的插座和连接器
GB/T 11918.1-2014的本章经如下修改后适用:第一段和第二段用以下内容替换:GB/T 11918的本部分规定了工业用的有或联锁带开关的插座和连接器的防触电保护、联锁、开关及其元件、结构、机械强度、电气性能等技术要求。本部分适用于主要作工业用途的、户内或户外使用的额定工作电压不超过1
Plugs, socket-outlets and couplers for industrial purposes.Part 4:Switched socket-outlets and connectors with or without interlock
DIN 71802:1992-04 带开口簧环或不带开口簧环的球形接头
The dimensions are given for ball joints consisting of ball studs and their housings. Furthermore, requirements are given for corrosion
Ball joints with or without circlips
GB 2099.5-2008 家用和类似用途插头插座.第2部分:固定式有联锁带开关插座的特殊要求
GB 2099.1的本章做下列修改后适用。 GB 2099的本部分适用于家电和类似用途供户内或户外用的、带或不带接地触头的、额定电压50V以上但不超过440V、额定电流不超过32A的交流固定式有联锁带开关插座。 符合本部分的有联锁带开关插座，由符合GB 2099.1的插座和符合GB
Plugs and socket-outlets for household and similar purposes.Part 2:Particular requirements for switched socket-outlets with interlock for fixed installations
JB/T 10434.2-2004 家用和类似用途插头插座.第2部分:固定式连锁带开关插座的特殊要求
本标准适用于家用和类似用途供户内户外用的、带或不带接地触头、额定电压不超过440V、额定电流不超过32A的交流固定式带开关的插座
Plugs and socket-outlets for household and similar purposes Part 2:Particular requirements for switched socket-outlets without interlock for fixed installations
编辑：北检院编辑部
