纤维增强塑料层压板检测

NF T57-103:1991 玻璃纤维增强塑料.层压板平行压缩特性的测定

TEXTIL-GLASS-REINFORCED PLASTICS. DETERMINATION OF COMPRESSIVE PROPERTIES IN THE DIRECTION PARALLEL TO THE PLANE OF LAMINATION.

GB/T 5258-1995 纤维增强塑料薄层板压缩性能试验方法

本标准规定了纤维增强塑料薄层板压缩性能试验的设备、试样、试验条件、试验步骤、试验结果计算及试验报告。 本标准适用于测定玻璃纤维、碳纤维、芳纶及混杂纤维增强塑料薄层板的压缩强度、压缩弹性模量、压缩割线模量、压缩泊松比、压缩最大应变及压缩应力-应变曲线。方法A适用于0.5～4mm的纤维

Test method for compressive properties of fiber reinforced plastic thin laminates

HB 7070-1994 纤维增强塑料层合板挤压强度试验方法

本标准规定了多向对称铺设纤维增强塑料层合板挤压强度试验方法的术语、试样及其制备、试验设备、试验步骤和计算。 　　本标准适用于测定多向对称铺设纤维增强塑料层合板的挤压强度

BS EN 2563:1997 碳纤维增强塑料.单向层压板.层间表面剪切强度的测定

This standard specifies the method for the determination of the apparent interlaminar shear strength of carbon fibre reinforced plastics in the form

Carbon fibre reinforced plastics - Unidirectional laminates - Determination of the apparent interlaminar shear strength

NF L17-412*NF EN 2563:1997 航天航空系列.碳纤维增强塑料.单向层压板.表观层间剪切强度的测定

Aerospace series. Carbon fibre reinforced plastics. Unidirectional laminates. Determination of the apparent interlaminar shear strength.

NF L17-410*NF EN 2561:1996 航空航天系列.碳纤维增强塑料.单向层压板.平行于纤维方向的拉伸试验

Aerospace series. Carbon fibre reinforced plastics. Unidirectioneal laminates. Tensile test parallel to the fibre direction.

NF L17-411*NF EN 2562:1997 航天航空系列.碳纤维增强塑料.单向层压板.平行于纤维方向的弯曲试验

Aerospace series. Carbon fibre reinforced plastics. Unidirectional laminates. Flexural test parallel to the fibre direction.

NF L17-409*NF EN 2597:1998 航空航天系列 碳素纤维增强塑料 单向层压板 垂直于纤维方向的拉伸试验

Aerospace series. Carbon fibre reinforced plastics. Unidirectional laminates. Tensile test perpendicular to the fibre direction.

DIN 65562:1991 航空航天.纤维增强的塑料.多向层压板的试验.支承强度的测定

The test method covered by this standard is used to determine the bearing strength of carbon fibre composites with multidirectional reinforcement made

Aerospace; fibre reinforced plastics; testing of multidirectional laminates; determination of bearing strength

GB/T 21239-2022 纤维增强塑料层合板冲击后压缩性能试验方法

Test method for compression after impact properties of fiber reinforced plastic laminates

GB/T 21239-2007 纤维增强塑料层合板冲击后压缩性能试验方法

本标准规定了纤维增强塑料层合板冲击后压缩性能试验的方法原理、试样、试验条件、试验设备、试验步骤、结果计算和试验报告。 本标准适用于测定具有多个纤维方向，且纤维方向相对试验方向均衡对称的连续纤维增强塑料层合板的冲击后压缩强度

Test method for compression after impact properties of fiber reinforced plastic laminates

DIN 65375:1989 航空航天.纤维增强的塑料.单向层压板的试验.与纤维方向垂直的压力试验

Aerospace; fiber reinforced plastics; testing of unidirectional laminates; compression test transverse to fiber direction

DIN 65559:1991 航空航天.纤维增强的塑料.多向层压板的试验.缺口孔抗拉强度的测定

The test method covered is used to determine the open-hole tensile strength of carbon fibre composites with multidirectional reinforcement made

Aerospace; fibre reinforced plastics; testing of multidirectional laminates; determination of open-hole tensile strength

DIN 65560:1991 航空航天.纤维增强的塑料.多向层压板的试验.已填充孔抗压强度的测定

The test method covered is used to determine the filled-hole compressive strength of carbon fibre composites with multidirectional reinforcement made

Aerospace; fibre reinforced plastics; testing of multidirectional laminates; determination of filled-hole compressive strength

DIN 65378:1989 航空航天.纤维增强的塑料.单向层压板的检验.与纤维方向垂直的拉伸试验

The test method covered by this standard serves to determine the tensile strength and modulus of elasticity on unidirectional laminates in 90

Aerospace; fiber reinforced plastics; testing of unidirectional laminates; tensile test transverse to fiber direction

NF T57-103:1991 玻璃纤维增强塑料.层压板平行压缩特性的测定

TEXTIL-GLASS-REINFORCED PLASTICS. DETERMINATION OF COMPRESSIVE PROPERTIES IN THE DIRECTION PARALLEL TO THE PLANE OF LAMINATION.

GB/T 5258-1995 纤维增强塑料薄层板压缩性能试验方法

本标准规定了纤维增强塑料薄层板压缩性能试验的设备、试样、试验条件、试验步骤、试验结果计算及试验报告。 本标准适用于测定玻璃纤维、碳纤维、芳纶及混杂纤维增强塑料薄层板的压缩强度、压缩弹性模量、压缩割线模量、压缩泊松比、压缩最大应变及压缩应力-应变曲线。方法A适用于0.5～4mm的纤维

Test method for compressive properties of fiber reinforced plastic thin laminates

HB 7070-1994 纤维增强塑料层合板挤压强度试验方法

本标准规定了多向对称铺设纤维增强塑料层合板挤压强度试验方法的术语、试样及其制备、试验设备、试验步骤和计算。 　　本标准适用于测定多向对称铺设纤维增强塑料层合板的挤压强度

BS EN 2563:1997 碳纤维增强塑料.单向层压板.层间表面剪切强度的测定

This standard specifies the method for the determination of the apparent interlaminar shear strength of carbon fibre reinforced plastics in the form

Carbon fibre reinforced plastics - Unidirectional laminates - Determination of the apparent interlaminar shear strength

NF L17-412*NF EN 2563:1997 航天航空系列.碳纤维增强塑料.单向层压板.表观层间剪切强度的测定

Aerospace series. Carbon fibre reinforced plastics. Unidirectional laminates. Determination of the apparent interlaminar shear strength.

NF L17-410*NF EN 2561:1996 航空航天系列.碳纤维增强塑料.单向层压板.平行于纤维方向的拉伸试验

Aerospace series. Carbon fibre reinforced plastics. Unidirectioneal laminates. Tensile test parallel to the fibre direction.

NF L17-411*NF EN 2562:1997 航天航空系列.碳纤维增强塑料.单向层压板.平行于纤维方向的弯曲试验

Aerospace series. Carbon fibre reinforced plastics. Unidirectional laminates. Flexural test parallel to the fibre direction.

NF L17-409*NF EN 2597:1998 航空航天系列 碳素纤维增强塑料 单向层压板 垂直于纤维方向的拉伸试验

Aerospace series. Carbon fibre reinforced plastics. Unidirectional laminates. Tensile test perpendicular to the fibre direction.

DIN 65562:1991 航空航天.纤维增强的塑料.多向层压板的试验.支承强度的测定

The test method covered by this standard is used to determine the bearing strength of carbon fibre composites with multidirectional reinforcement made

Aerospace; fibre reinforced plastics; testing of multidirectional laminates; determination of bearing strength

GB/T 21239-2022 纤维增强塑料层合板冲击后压缩性能试验方法

Test method for compression after impact properties of fiber reinforced plastic laminates

GB/T 21239-2007 纤维增强塑料层合板冲击后压缩性能试验方法

本标准规定了纤维增强塑料层合板冲击后压缩性能试验的方法原理、试样、试验条件、试验设备、试验步骤、结果计算和试验报告。 本标准适用于测定具有多个纤维方向，且纤维方向相对试验方向均衡对称的连续纤维增强塑料层合板的冲击后压缩强度

Test method for compression after impact properties of fiber reinforced plastic laminates

DIN 65375:1989 航空航天.纤维增强的塑料.单向层压板的试验.与纤维方向垂直的压力试验

Aerospace; fiber reinforced plastics; testing of unidirectional laminates; compression test transverse to fiber direction

DIN 65559:1991 航空航天.纤维增强的塑料.多向层压板的试验.缺口孔抗拉强度的测定

The test method covered is used to determine the open-hole tensile strength of carbon fibre composites with multidirectional reinforcement made

Aerospace; fibre reinforced plastics; testing of multidirectional laminates; determination of open-hole tensile strength

DIN 65560:1991 航空航天.纤维增强的塑料.多向层压板的试验.已填充孔抗压强度的测定

The test method covered is used to determine the filled-hole compressive strength of carbon fibre composites with multidirectional reinforcement made

Aerospace; fibre reinforced plastics; testing of multidirectional laminates; determination of filled-hole compressive strength

DIN 65378:1989 航空航天.纤维增强的塑料.单向层压板的检验.与纤维方向垂直的拉伸试验

The test method covered by this standard serves to determine the tensile strength and modulus of elasticity on unidirectional laminates in 90

Aerospace; fiber reinforced plastics; testing of unidirectional laminates; tensile test transverse to fiber direction