橡胶不导电软管检测

FORD WSS-M96D33-A9-1999 低渗透性耐燃料腐蚀的导电型不增强橡胶软管（丁腈橡胶（NBR）/THV/丁腈橡胶（NBR）/氯磺化聚乙烯（CSM）橡胶）

HOSE, NON-REINFORCED RUBBER, FUEL RESISTANT CONDUCTIVE, LOW PERMEATING (NBR/THV/NBR/CSM)

FORD WSA-M96D33-A2-2006 低渗透性耐燃料/乙醇的不导电增强型橡胶软管***与标准FORD WSS-M99P1111-A一起使用***

HOSE, REINFORCED RUBBER, FUEL/ALCOHOL RESISTANT NON-CONDUCTIVE, LOW PERMEATING ***TO BE USED WITH FORD WSS-M99P1111-A***

FORD WSS-M96D33-A11-1999 低渗透性耐燃料腐蚀的导电型不增强橡胶软管（丁腈橡胶（NBR）/THV/丁腈橡胶（NBR）/氯磺化聚乙烯（CSM）橡胶）．列于标准WSS-M96D33-A9上

HOSE, NON-REINFORCED RUBBER, FUEL RESISTANT, CONDUCTIVE, LOW PERMEATING (NBR/THV/NBR/CM) (Shown on WSS-M96D33-A9)

GB/T 9572-2013 橡胶和塑料软管及软管组合件 电阻和导电性的测定

本标准规定了用于测定橡胶和塑料软管、非增强软管及其组合件的电性能试验方法。本标准适用于测定导电、抗静电和非导电的软管的电阻,以及其组合件管接头之间的电连续性和电间断性

Rubber and plastics hoses and hose assemblies.Determination of electrical resistance and conductivity

KS M ISO 8031:2019 橡胶和塑料软管和软管组件 - 电阻和电导率的测定

Rubber and plastics hoses and hose assemblies — Determination of electrical resistance and conductivity

ISO 8031:2020 橡胶和塑料软管和软管组件 - 电阻和电导率的测定

Rubber and plastics hoses and hose assemblies — Determination of electrical resistance and conductivity

EN ISO 8031:2020 橡胶和塑料软管和软管组件.电阻率和电导率的测定

This document specifies electrical test methods for rubber and plastics hoses, tubing and hose assemblies to determine the resistance of conductive

Rubber and plastics hoses and hose assemblies - Determination of electrical resistance and conductivity (ISO 8031:2020)

ISO 8031:2009 橡胶和塑料软管和软管组件.电阻率和电导率的测定

Rubber and plastics hoses and hose assemblies - Determination of electrical resistance and conductivity

NF T47-135:2009 橡胶和塑料软管和软管组件.电阻率和电导率的测定

Rubber and plastics hoses and hose assemblies - Determination of electrical resistance and conductivity.

EN ISO 8031:2009 橡胶和塑料软管和软管组件.电阻率和电导率的测定

This International Standard specifies electrical test methods for rubber and plastics hoses, tubing and hose assemblies to determine the resistance

Rubber and plastics hoses and hose assemblies - Determination of electrical resistance and conductivity

BS EN ISO 8031:2009 橡胶和塑料软管和软管组件.电阻率和电导率的测定

Rubber and plastics hoses and hose assemblies - Determination of electrical resistance and conductivity

MSZ 3048/6-1972 橡胶软管．焊接设备的橡胶软管

GB/T 2550-1992 焊接及切割用橡胶软管 氧气橡胶软管

本标准规定了氧气橡胶软管的技术要求和试验方法等。 本标准适用于-20～45℃环境中焊接和切割输送氧气用的橡胶软管（以下简称软管

Specification for hose for equipment for gas welding,cutting and related processes--Oxygen rubber hose

GB/T 2551-1992 焊接及切割用橡胶软管 乙炔橡胶软管

本标准规定了乙炔橡胶软管的技术要求和试验方法等。 本标准适用于-20～45C环境中焊接和切割输送乙快用橡胶软管（以下简称软管

Specification for hose for equipment for gas welding,cutting and related processes--Acetylene rubber hose

ISO 4642:1978 橡胶制品 不可折叠的消防软管

Specifies requirements for two types and five grades; suitable for use on portable and wheeled fire extinguishers, on wall-mounted fire hose reels

Rubber products; Hoses, non-collapsible, for fire-fighting service

FORD WSS-M96D33-A9-1999 低渗透性耐燃料腐蚀的导电型不增强橡胶软管（丁腈橡胶（NBR）/THV/丁腈橡胶（NBR）/氯磺化聚乙烯（CSM）橡胶）

HOSE, NON-REINFORCED RUBBER, FUEL RESISTANT CONDUCTIVE, LOW PERMEATING (NBR/THV/NBR/CSM)

FORD WSA-M96D33-A2-2006 低渗透性耐燃料/乙醇的不导电增强型橡胶软管***与标准FORD WSS-M99P1111-A一起使用***

HOSE, REINFORCED RUBBER, FUEL/ALCOHOL RESISTANT NON-CONDUCTIVE, LOW PERMEATING ***TO BE USED WITH FORD WSS-M99P1111-A***

FORD WSS-M96D33-A11-1999 低渗透性耐燃料腐蚀的导电型不增强橡胶软管（丁腈橡胶（NBR）/THV/丁腈橡胶（NBR）/氯磺化聚乙烯（CSM）橡胶）．列于标准WSS-M96D33-A9上

HOSE, NON-REINFORCED RUBBER, FUEL RESISTANT, CONDUCTIVE, LOW PERMEATING (NBR/THV/NBR/CM) (Shown on WSS-M96D33-A9)

GB/T 9572-2013 橡胶和塑料软管及软管组合件 电阻和导电性的测定

本标准规定了用于测定橡胶和塑料软管、非增强软管及其组合件的电性能试验方法。本标准适用于测定导电、抗静电和非导电的软管的电阻,以及其组合件管接头之间的电连续性和电间断性

Rubber and plastics hoses and hose assemblies.Determination of electrical resistance and conductivity

KS M ISO 8031:2019 橡胶和塑料软管和软管组件 - 电阻和电导率的测定

Rubber and plastics hoses and hose assemblies — Determination of electrical resistance and conductivity

ISO 8031:2020 橡胶和塑料软管和软管组件 - 电阻和电导率的测定

Rubber and plastics hoses and hose assemblies — Determination of electrical resistance and conductivity

EN ISO 8031:2020 橡胶和塑料软管和软管组件.电阻率和电导率的测定

This document specifies electrical test methods for rubber and plastics hoses, tubing and hose assemblies to determine the resistance of conductive

Rubber and plastics hoses and hose assemblies - Determination of electrical resistance and conductivity (ISO 8031:2020)

ISO 8031:2009 橡胶和塑料软管和软管组件.电阻率和电导率的测定

Rubber and plastics hoses and hose assemblies - Determination of electrical resistance and conductivity

NF T47-135:2009 橡胶和塑料软管和软管组件.电阻率和电导率的测定

Rubber and plastics hoses and hose assemblies - Determination of electrical resistance and conductivity.

EN ISO 8031:2009 橡胶和塑料软管和软管组件.电阻率和电导率的测定

This International Standard specifies electrical test methods for rubber and plastics hoses, tubing and hose assemblies to determine the resistance

Rubber and plastics hoses and hose assemblies - Determination of electrical resistance and conductivity

BS EN ISO 8031:2009 橡胶和塑料软管和软管组件.电阻率和电导率的测定

Rubber and plastics hoses and hose assemblies - Determination of electrical resistance and conductivity

MSZ 3048/6-1972 橡胶软管．焊接设备的橡胶软管

GB/T 2550-1992 焊接及切割用橡胶软管 氧气橡胶软管

本标准规定了氧气橡胶软管的技术要求和试验方法等。 本标准适用于-20～45℃环境中焊接和切割输送氧气用的橡胶软管（以下简称软管

Specification for hose for equipment for gas welding,cutting and related processes--Oxygen rubber hose

GB/T 2551-1992 焊接及切割用橡胶软管 乙炔橡胶软管

本标准规定了乙炔橡胶软管的技术要求和试验方法等。 本标准适用于-20～45C环境中焊接和切割输送乙快用橡胶软管（以下简称软管

Specification for hose for equipment for gas welding,cutting and related processes--Acetylene rubber hose

ISO 4642:1978 橡胶制品 不可折叠的消防软管

Specifies requirements for two types and five grades; suitable for use on portable and wheeled fire extinguishers, on wall-mounted fire hose reels

Rubber products; Hoses, non-collapsible, for fire-fighting service