医用中心供氧系统检测

📅 发布时间:2024-05-27 👤 来源:北检院 👁 阅读:

YY/T 0187-1994 医用中心供氧系统通用技术条件

本标准规定了医用中心供氧系统技术要求、试验方法、检验规则、标志、包装、运输和贮存的要求。 本标准适用于医用中心供氧系统。该系统配套于医院新建、扩建、改建工程

General technical requirements for oxygen supply system in medical center

YY/T 0186-1994 医用中心吸引系统通用技术条件

本标准规定了医用中心吸引系统技术要求、试验方法、检验规则及标志、包装、运输、贮存的要求。 本标准适用于医用中心吸引系统。该系统适用于医院的新建、扩建和改建的中心吸引系统。 该吸引系统不适用于直接做人工流产吸引

General technical requirements for Suction system in medical center

ISO 10083:2006 医用气体管道系统用浓缩氧气供应系统

This International Standard specifies requirements for the design and installation of an oxygen concentrator supply system for use with a medical gas

Oxygen concentrator supply systems for use with medical gas pipeline systems

CSA Z305.6-92-CAN/CSA-1992 医疗氧气中心供应系统:运行在阻燃医用气管系统中.第1版质量保证程序-目录1.第2版.通用指令 第1号

The Canadian Standards Association (CSA), under whose auspices this National Standard has been produced, was chartered in 7979 and accredited

Medical Oxygen Concentrator Central Supply System: for Use with Nonflammable Medical Gas Piping Systems First Edition; General Instruction No 1

TCVN 7742-2007 医用气体管道系统用氧气浓缩器供气系统

Oxygen concentrator supply systems for use with medical gas pipeline systems

YY 1468-2016 用于医用气体管道系统的氧气浓缩器供气系统

YY/T 1468-2016 用于医用气体管道系统的氧气浓缩器供气系统

Oxygen concentrator supply systems for use with medical gas pipeline systems

GOST R ISO 10083:2011 为使用医疗气体管道系统的制氧机供应系统

Oxygen concentrator supply systems for use with medical gas pipeline systems

NF S95-175/A1:2014 为使用医疗气体管道系统的制氧机供应系统

Le présent document apporte des précisions supplémentaires portant sur la source d'attente. Ont été modifiés les paragraphes suivants : 5.2 "Source d

Oxygen concentrator supply systems for use with medical gas pipeline systems

T/WSJD 39-2023 医疗机构消毒供应中心物品信息追溯系统要求

本文件规定了医疗机构消毒供应中心物品信息追溯系统(以下简称“物品信息追溯系统”)的基本要求、管理模块设计及要求、物品流程追溯模块设计及要求、硬件配置参数要求、信息安全要求等。 本文件适用于二级(含二级)以上医疗机构消毒供应中心。基层医疗机构和物品信息追溯系统开发设计单位可参照执行

CSA Z10083-08-CAN/CSA-2008 医用气体管道系统用氧气浓缩器供给系统.第1版

NOTE 1A Throughout this Standard, where the term “oxygen-enriched air” appears, replace it with the term “Oxygen 93”. [Replace the fourth paragraph

Oxygen concentrator supply systems for use with medical gas pipeline systems First Edition

DIN ISO 10083:2008 医用气体管道系统用氧气浓缩器供应设备

1.1 This International Standard specifies requirements for the design and installation of an oxygen concentrator supply system for use

Oxygen concentrator supply systems for use with medical gas pipeline systems (ISO 10083:2006);English version of DIN ISO 10083:2008-12

T/ZZB 2498-2021 医用分子筛制氧系统

本文件规定了医用分子筛制氧系统(以下简称制氧系统)的基本要求、使用条件、技术要求、试验方法、检验规则、标志、使用说明书、包装、运输和贮存、质量承诺。 本文件适用于使用变压吸附法(PSA)制取富氧空气(93 %氧)或医用氧,经医用气体管道系统向其它用氧医疗器械提供气源,并按其临床适用范围向

Medical molecular sieve oxygen generation system

HB 8442-2014 民用飞机供氧系统通用要求

本标准规定了民用飞机供氧系统的技术要求和验证要求。 本标准适用于民用飞机供氧系统(以下简称系统)的设计和试验

General requirements for oxygen supply system of civil aircraft

SAE AIR825/9-2002 需求式供氧系统

This SAE Aerospace Information Report (AIR) describes the general operating principles of demand oxygen equipment, including variant types

Demand Oxygen Systems

YY/T 0187-1994 医用中心供氧系统通用技术条件

本标准规定了医用中心供氧系统技术要求、试验方法、检验规则、标志、包装、运输和贮存的要求。 本标准适用于医用中心供氧系统。该系统配套于医院新建、扩建、改建工程

General technical requirements for oxygen supply system in medical center

YY/T 0186-1994 医用中心吸引系统通用技术条件

本标准规定了医用中心吸引系统技术要求、试验方法、检验规则及标志、包装、运输、贮存的要求。 本标准适用于医用中心吸引系统。该系统适用于医院的新建、扩建和改建的中心吸引系统。 该吸引系统不适用于直接做人工流产吸引

General technical requirements for Suction system in medical center

ISO 10083:2006 医用气体管道系统用浓缩氧气供应系统

This International Standard specifies requirements for the design and installation of an oxygen concentrator supply system for use with a medical gas

Oxygen concentrator supply systems for use with medical gas pipeline systems

CSA Z305.6-92-CAN/CSA-1992 医疗氧气中心供应系统:运行在阻燃医用气管系统中.第1版质量保证程序-目录1.第2版.通用指令 第1号

The Canadian Standards Association (CSA), under whose auspices this National Standard has been produced, was chartered in 7979 and accredited

Medical Oxygen Concentrator Central Supply System: for Use with Nonflammable Medical Gas Piping Systems First Edition; General Instruction No 1

TCVN 7742-2007 医用气体管道系统用氧气浓缩器供气系统

Oxygen concentrator supply systems for use with medical gas pipeline systems

YY 1468-2016 用于医用气体管道系统的氧气浓缩器供气系统

YY/T 1468-2016 用于医用气体管道系统的氧气浓缩器供气系统

Oxygen concentrator supply systems for use with medical gas pipeline systems

GOST R ISO 10083:2011 为使用医疗气体管道系统的制氧机供应系统

Oxygen concentrator supply systems for use with medical gas pipeline systems

NF S95-175/A1:2014 为使用医疗气体管道系统的制氧机供应系统

Le présent document apporte des précisions supplémentaires portant sur la source d'attente. Ont été modifiés les paragraphes suivants : 5.2 "Source d

Oxygen concentrator supply systems for use with medical gas pipeline systems

T/WSJD 39-2023 医疗机构消毒供应中心物品信息追溯系统要求

本文件规定了医疗机构消毒供应中心物品信息追溯系统(以下简称“物品信息追溯系统”)的基本要求、管理模块设计及要求、物品流程追溯模块设计及要求、硬件配置参数要求、信息安全要求等。 本文件适用于二级(含二级)以上医疗机构消毒供应中心。基层医疗机构和物品信息追溯系统开发设计单位可参照执行

CSA Z10083-08-CAN/CSA-2008 医用气体管道系统用氧气浓缩器供给系统.第1版

NOTE 1A Throughout this Standard, where the term “oxygen-enriched air” appears, replace it with the term “Oxygen 93”. [Replace the fourth paragraph

Oxygen concentrator supply systems for use with medical gas pipeline systems First Edition

DIN ISO 10083:2008 医用气体管道系统用氧气浓缩器供应设备

1.1 This International Standard specifies requirements for the design and installation of an oxygen concentrator supply system for use

Oxygen concentrator supply systems for use with medical gas pipeline systems (ISO 10083:2006);English version of DIN ISO 10083:2008-12

T/ZZB 2498-2021 医用分子筛制氧系统

本文件规定了医用分子筛制氧系统(以下简称制氧系统)的基本要求、使用条件、技术要求、试验方法、检验规则、标志、使用说明书、包装、运输和贮存、质量承诺。 本文件适用于使用变压吸附法(PSA)制取富氧空气(93 %氧)或医用氧,经医用气体管道系统向其它用氧医疗器械提供气源,并按其临床适用范围向

Medical molecular sieve oxygen generation system

HB 8442-2014 民用飞机供氧系统通用要求

本标准规定了民用飞机供氧系统的技术要求和验证要求。 本标准适用于民用飞机供氧系统(以下简称系统)的设计和试验

General requirements for oxygen supply system of civil aircraft

SAE AIR825/9-2002 需求式供氧系统

This SAE Aerospace Information Report (AIR) describes the general operating principles of demand oxygen equipment, including variant types

Demand Oxygen Systems

编辑:北检院编辑部

我们的优势

选择北检院的六大理由

📚

CMA/CNAS 双认证

旗下实验室具备国家认证认可监督管理委员会CMA资质认定及中国合格评定国家认可委员会CNAS实验室认可,检测报告具有国际公信力。

🔬

1000+ 台套先进设备

配备扫描电镜、气质联用仪、电感耦合等离子体质谱仪等国际先进检测仪器,确保数据精准可靠。

🏢

15000+ 平米实验室

拥有规模化专业检测基地,涵盖材料、化工、食品、环境等多个专业实验室,满足多领域检测需求。

👥

资深技术团队

汇聚材料科学、化学分析、环境工程等领域专家,拥有10年+行业经验,提供专业可靠的检测分析服务。

⏱

快速响应机制

标准检测周期短至3个工作日,加急服务24小时出具报告,全程一对一工程师跟进,确保高效交付。

🌎

全国服务网络

总部位于北京,山东设立分部,服务覆盖全国,为20万+客户提供便捷的一站式检测解决方案。

荣誉资质

旗下实验室资质荣誉

CMA 检验检测机构资质认定

CMA 检验检测机构资质认定

国家认证认可监督管理委员会颁发,具备向社会出具具有证明作用数据的资质。

CNAS 实验室认可证书

CNAS 实验室认可证书

中国合格评定国家认可委员会认可,检测结果获国际互认,具有国际公信力。

ISO 质量管理体系认证

ISO 质量管理体系认证

通过ISO 质量管理体系认证,管理体系实现规范化、标准化。

绿色低碳诚信示范创建企业

绿色低碳诚信示范创建企业

荣获绿色低碳诚信示范创建企业称号,践行可持续发展理念,推动绿色低碳转型,助力"双碳"目标实现。

北京市创新型中小企业

北京市"创新型"中小企业

经北京市经济和信息化局认定的创新型中小企业,具备较强创新能力与较高专业化水平,是优质中小企业梯度培育体系的重要基础力量。

北京市专精特新中小企业

北京市"专精特新"中小企业

经北京市经济和信息化局认定的专精特新中小企业,具备专业化、精细化、特色化、新颖化发展特征,在细分领域具有较强竞争优势。

查看全部资质

仪器设备

国际先进检测仪器,确保检测数据精准可靠

查看全部设备

检测流程

标准化流程,高效交付

01

需求沟通

客户提交检测需求,技术顾问一对一沟通,明确检测项目与标准。

➔
02

样品寄送

客户按照规范要求寄送样品,实验室确认样品状态与数量。

➔
03

实验检测

专业工程师按照标准方法进行检测分析,全程质量控制。

➔
04

数据审核

检测数据经多级审核,确保结果准确、可靠、可追溯。

➔
05

报告出具

出具检测报告,支持电子版与纸质版,快递送达。

VR实验室720°全景 NEW · 全新上线 VR实验室上线啦! 720°全景实景观览 · 足不出户走进实验室 立即体验 检测咨询 · 立即在线沟通