推车式灭火器检测

📅 发布时间:2024-05-27 👤 来源:北检院 👁 阅读:

GB 8109-2005 推车式灭火器

本标准规定了推车式灭火器的定义、分类、灭火剂、驱动气体、充装量和型号、性能要求、试验方法、检验规则和标志等要求。 本标准适用于总质量大于25kg,但不大于450kg的推车式灭火器。 本标准不适用于灭D类火的推车式灭火器

Wheeled fire extinguishers

AS 4265-1995 推车式灭火器

Specifies requirements for wheeled fire extinguishers in which the extinguishant can be expelled by either gas stored under pressure in the cylinder

Wheeled fire extinguishers

ISO 11601:2008 灭火.推车式灭火器.性能和结构

This International Standard specifies the principal requirements intended to ensure the safety, reliability and performance of wheeled fire

Fire fighting — Wheeled fire extinguishers — Performance and construction

ISO 11601:2017 灭火.推车式灭火器.性能和结构

Fire fighting - Wheeled fire extinguishers - Performance and construction

ISO 11601:1999 推车式灭火器 性能和结构

This International Standard specifies the principal requirements intended to ensure the safety, reliability and performance of wheeled fire

Wheeled fire extinguishers - Performance and construction

GB 8109-1987 推车式灭火器性能要求和试验方法

本标准规定了推车式灭火器在使用性能和安全性能方面必须达到的要求。 本标准适用于各种推车式灭火器

Characteristics and tests for transportable fire extinguishers

GA 77.1-1994 推车式1211灭火器

本标准规定了产品的分类、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于推车式1211灭火器(以下简称灭火器

GOST R 51017-2009 消防工程.推车式灭火器.一般技术要求.试验方法

Fire engineering. Wheeled fire extinguishers. General technical requirements. Test methods

TCVN 7435-1-2004 消防.便携式和推车式灭火器.第1部分:选择和安装

Fire protection.Portable and wheeled fire extinguishers.Part 1: Selection and installation

TCVN 7435-2-2004 消防.便携式和推车式灭火器.第2部分:检验和维修

Fire protection.Portable and wheeled fire extinguishers.Part 2: Inspection and maintenance

ISO 11602-1:2000 消防 手提式和推车式灭火器 第1部分:选择和安装

This part of ISO 11602 gives requirements for the selection and installation of portable and wheeled fire extinguishers. It should be used

Fire protection - Portable and wheeled fire extinguishers - Part 1: Selection and installation

ISO 11602-2:2000 消防 手提式和推车式灭火器 第2部分:检查和维修

This part of ISO 11602 specifies the inspection, maintenance, and periodic testing of portable and wheeled fire extinguishers. Portable fire

Fire protection - Portable and wheeled fire extinguishers - Part 2: Inspection and maintenance

GA 77.3-1994 推车式干粉灭火器

本标准规定了推车式干粉灭火器的分类、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于各种推车式干粉灭火器(简称灭火器

TCVN 7027-2013 消防.车推式灭火器.性能和结构

Fire fighting.Wheeled fire extinguishers.Performance and construction

GA 107-1995 推车式二氧化碳灭火器

本标准规定了推车式二氧化碳灭火器的产品分类、技术要求、试验方法、检验规则、标志、包装、运输、贮存。 本标准适用于推车式二氧化碳灭火器(以下简称灭火器

GB 8109-2005 推车式灭火器

本标准规定了推车式灭火器的定义、分类、灭火剂、驱动气体、充装量和型号、性能要求、试验方法、检验规则和标志等要求。 本标准适用于总质量大于25kg,但不大于450kg的推车式灭火器。 本标准不适用于灭D类火的推车式灭火器

Wheeled fire extinguishers

AS 4265-1995 推车式灭火器

Specifies requirements for wheeled fire extinguishers in which the extinguishant can be expelled by either gas stored under pressure in the cylinder

Wheeled fire extinguishers

ISO 11601:2008 灭火.推车式灭火器.性能和结构

This International Standard specifies the principal requirements intended to ensure the safety, reliability and performance of wheeled fire

Fire fighting — Wheeled fire extinguishers — Performance and construction

ISO 11601:2017 灭火.推车式灭火器.性能和结构

Fire fighting - Wheeled fire extinguishers - Performance and construction

ISO 11601:1999 推车式灭火器 性能和结构

This International Standard specifies the principal requirements intended to ensure the safety, reliability and performance of wheeled fire

Wheeled fire extinguishers - Performance and construction

GB 8109-1987 推车式灭火器性能要求和试验方法

本标准规定了推车式灭火器在使用性能和安全性能方面必须达到的要求。 本标准适用于各种推车式灭火器

Characteristics and tests for transportable fire extinguishers

GA 77.1-1994 推车式1211灭火器

本标准规定了产品的分类、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于推车式1211灭火器(以下简称灭火器

GOST R 51017-2009 消防工程.推车式灭火器.一般技术要求.试验方法

Fire engineering. Wheeled fire extinguishers. General technical requirements. Test methods

TCVN 7435-1-2004 消防.便携式和推车式灭火器.第1部分:选择和安装

Fire protection.Portable and wheeled fire extinguishers.Part 1: Selection and installation

TCVN 7435-2-2004 消防.便携式和推车式灭火器.第2部分:检验和维修

Fire protection.Portable and wheeled fire extinguishers.Part 2: Inspection and maintenance

ISO 11602-1:2000 消防 手提式和推车式灭火器 第1部分:选择和安装

This part of ISO 11602 gives requirements for the selection and installation of portable and wheeled fire extinguishers. It should be used

Fire protection - Portable and wheeled fire extinguishers - Part 1: Selection and installation

ISO 11602-2:2000 消防 手提式和推车式灭火器 第2部分:检查和维修

This part of ISO 11602 specifies the inspection, maintenance, and periodic testing of portable and wheeled fire extinguishers. Portable fire

Fire protection - Portable and wheeled fire extinguishers - Part 2: Inspection and maintenance

GA 77.3-1994 推车式干粉灭火器

本标准规定了推车式干粉灭火器的分类、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于各种推车式干粉灭火器(简称灭火器

TCVN 7027-2013 消防.车推式灭火器.性能和结构

Fire fighting.Wheeled fire extinguishers.Performance and construction

GA 107-1995 推车式二氧化碳灭火器

本标准规定了推车式二氧化碳灭火器的产品分类、技术要求、试验方法、检验规则、标志、包装、运输、贮存。 本标准适用于推车式二氧化碳灭火器(以下简称灭火器

编辑:北检院编辑部

我们的优势

选择北检院的六大理由

📚

CMA/CNAS 双认证

旗下实验室具备国家认证认可监督管理委员会CMA资质认定及中国合格评定国家认可委员会CNAS实验室认可,检测报告具有国际公信力。

🔬

1000+ 台套先进设备

配备扫描电镜、气质联用仪、电感耦合等离子体质谱仪等国际先进检测仪器,确保数据精准可靠。

🏢

15000+ 平米实验室

拥有规模化专业检测基地,涵盖材料、化工、食品、环境等多个专业实验室,满足多领域检测需求。

👥

资深技术团队

汇聚材料科学、化学分析、环境工程等领域专家,拥有10年+行业经验,提供专业可靠的检测分析服务。

⏱

快速响应机制

标准检测周期短至3个工作日,加急服务24小时出具报告,全程一对一工程师跟进,确保高效交付。

🌎

全国服务网络

总部位于北京,山东设立分部,服务覆盖全国,为20万+客户提供便捷的一站式检测解决方案。

荣誉资质

旗下实验室资质荣誉

CMA 检验检测机构资质认定

CMA 检验检测机构资质认定

国家认证认可监督管理委员会颁发,具备向社会出具具有证明作用数据的资质。

CNAS 实验室认可证书

CNAS 实验室认可证书

中国合格评定国家认可委员会认可,检测结果获国际互认,具有国际公信力。

ISO 质量管理体系认证

ISO 质量管理体系认证

通过ISO 质量管理体系认证,管理体系实现规范化、标准化。

绿色低碳诚信示范创建企业

绿色低碳诚信示范创建企业

荣获绿色低碳诚信示范创建企业称号,践行可持续发展理念,推动绿色低碳转型,助力"双碳"目标实现。

北京市创新型中小企业

北京市"创新型"中小企业

经北京市经济和信息化局认定的创新型中小企业,具备较强创新能力与较高专业化水平,是优质中小企业梯度培育体系的重要基础力量。

北京市专精特新中小企业

北京市"专精特新"中小企业

经北京市经济和信息化局认定的专精特新中小企业,具备专业化、精细化、特色化、新颖化发展特征,在细分领域具有较强竞争优势。

查看全部资质

仪器设备

国际先进检测仪器,确保检测数据精准可靠

查看全部设备

检测流程

标准化流程,高效交付

01

需求沟通

客户提交检测需求,技术顾问一对一沟通,明确检测项目与标准。

➔
02

样品寄送

客户按照规范要求寄送样品,实验室确认样品状态与数量。

➔
03

实验检测

专业工程师按照标准方法进行检测分析,全程质量控制。

➔
04

数据审核

检测数据经多级审核,确保结果准确、可靠、可追溯。

➔
05

报告出具

出具检测报告,支持电子版与纸质版,快递送达。

VR实验室720°全景 NEW · 全新上线 VR实验室上线啦! 720°全景实景观览 · 足不出户走进实验室 立即体验 检测咨询 · 立即在线沟通