粘合剂及有关制品检测

📅 发布时间:2024-05-27 👤 来源:北检院 👁 阅读:

DIN 55934:1992 油漆和清漆的粘结剂.亚麻油及有关制品.试验方法

Binders for paints and varnishes; linseed oil and related products; methods of test

ASTM C896-14 有关粘土制品的标准术语

0

Standard Terminology Relating to Clay Products

ASTM C896-99 有关粘土制品的标准术语

Standard Terminology Relating to Clay Products

ASTM C896-02 有关粘土制品的标准术语

Standard Terminology Relating to Clay Products

EN 12701:2001 结构胶粘剂贮藏有关结构粘合剂和相关材料的产品寿命的词和短语的规定

This European Standard specifies definitions and requirements applicable to structural adhesives whose storage life is limited by possible change

Structural adhesives - Storage - Determination of words and phrases relating to the product life of structural adhesives and related materials

ASTM C896-21 与粘土制品有关的标准术语

Standard Terminology Relating to Clay Products

T/CNFIA 163-2022 食品接触材料及制品用粘合剂符合性声明要求

NF T76-103:1983 粘合剂.粘合剂及其基本产品和类似产品PH值的测定

ADHESIVES. DETERMINATION OF PH ADHESIVES,THEIR BASE PRODUCTS AND SIMILAR PREPARATION.

AS 2754.2-1991 木材和木材制品的粘合剂.聚合物乳胶粘合剂

Specifies requirements for polymer emulsion adhesives, in one-component and two-component preparations, intended for wood-to-wood bonding. Appendices

Adhesives for timber and timber products - Polymer emulsion adhesives

GM 9985479-1989 有机硅助剂粘合剂

zutrifft, müssen nach dieser Vorschrift geprüft werden und von der verantwortlichen GM Abteilung genehmigt sein, ehe eine Lieferung erfolgen kann

Adhesive, Promoter, Silicone Revision A

CNS 5345-1980 粘着剂有关名词定义

Standard Definitions of Terms Relating to Adhesives

GM 9985534-1989 fipg有机硅助剂粘合剂

Freigabemuster, für die diese Vorschrift zutrifft, müssen nach dieser Vorschrift geprüft werden und von der Produktentwicklung und Konstruktion

Adhesive, Promoter, Silicone, FIPG Revision A

ONORM C 2700-1983 粘合剂.粘合剂处理.术语及解释

Adhesives; adhesive processing; terms and definitions

ISO 23581:2020 石油产品及有关产品运动粘度的测定Stabinger型粘度计法

Petroleum products and related products — Determination of kinematic viscosity — Method by Stabinger type viscometer

KS F 2160-2018 性的测定浸泡脱层为粘合剂粘合木制品

Determination of resistance to soaking delamination for adhesive-bonded wood products

DIN 55934:1992 油漆和清漆的粘结剂.亚麻油及有关制品.试验方法

Binders for paints and varnishes; linseed oil and related products; methods of test

ASTM C896-14 有关粘土制品的标准术语

0

Standard Terminology Relating to Clay Products

ASTM C896-99 有关粘土制品的标准术语

Standard Terminology Relating to Clay Products

ASTM C896-02 有关粘土制品的标准术语

Standard Terminology Relating to Clay Products

EN 12701:2001 结构胶粘剂贮藏有关结构粘合剂和相关材料的产品寿命的词和短语的规定

This European Standard specifies definitions and requirements applicable to structural adhesives whose storage life is limited by possible change

Structural adhesives - Storage - Determination of words and phrases relating to the product life of structural adhesives and related materials

ASTM C896-21 与粘土制品有关的标准术语

Standard Terminology Relating to Clay Products

T/CNFIA 163-2022 食品接触材料及制品用粘合剂符合性声明要求

NF T76-103:1983 粘合剂.粘合剂及其基本产品和类似产品PH值的测定

ADHESIVES. DETERMINATION OF PH ADHESIVES,THEIR BASE PRODUCTS AND SIMILAR PREPARATION.

AS 2754.2-1991 木材和木材制品的粘合剂.聚合物乳胶粘合剂

Specifies requirements for polymer emulsion adhesives, in one-component and two-component preparations, intended for wood-to-wood bonding. Appendices

Adhesives for timber and timber products - Polymer emulsion adhesives

GM 9985479-1989 有机硅助剂粘合剂

zutrifft, müssen nach dieser Vorschrift geprüft werden und von der verantwortlichen GM Abteilung genehmigt sein, ehe eine Lieferung erfolgen kann

Adhesive, Promoter, Silicone Revision A

CNS 5345-1980 粘着剂有关名词定义

Standard Definitions of Terms Relating to Adhesives

GM 9985534-1989 fipg有机硅助剂粘合剂

Freigabemuster, für die diese Vorschrift zutrifft, müssen nach dieser Vorschrift geprüft werden und von der Produktentwicklung und Konstruktion

Adhesive, Promoter, Silicone, FIPG Revision A

ONORM C 2700-1983 粘合剂.粘合剂处理.术语及解释

Adhesives; adhesive processing; terms and definitions

ISO 23581:2020 石油产品及有关产品运动粘度的测定Stabinger型粘度计法

Petroleum products and related products — Determination of kinematic viscosity — Method by Stabinger type viscometer

KS F 2160-2018 性的测定浸泡脱层为粘合剂粘合木制品

Determination of resistance to soaking delamination for adhesive-bonded wood products

编辑:北检院编辑部

我们的优势

选择北检院的六大理由

📚

CMA/CNAS 双认证

旗下实验室具备国家认证认可监督管理委员会CMA资质认定及中国合格评定国家认可委员会CNAS实验室认可,检测报告具有国际公信力。

🔬

1000+ 台套先进设备

配备扫描电镜、气质联用仪、电感耦合等离子体质谱仪等国际先进检测仪器,确保数据精准可靠。

🏢

15000+ 平米实验室

拥有规模化专业检测基地,涵盖材料、化工、食品、环境等多个专业实验室,满足多领域检测需求。

👥

资深技术团队

汇聚材料科学、化学分析、环境工程等领域专家,拥有10年+行业经验,提供专业可靠的检测分析服务。

⏱

快速响应机制

标准检测周期短至3个工作日,加急服务24小时出具报告,全程一对一工程师跟进,确保高效交付。

🌎

全国服务网络

总部位于北京,山东设立分部,服务覆盖全国,为20万+客户提供便捷的一站式检测解决方案。

荣誉资质

旗下实验室资质荣誉

CMA 检验检测机构资质认定

CMA 检验检测机构资质认定

国家认证认可监督管理委员会颁发,具备向社会出具具有证明作用数据的资质。

CNAS 实验室认可证书

CNAS 实验室认可证书

中国合格评定国家认可委员会认可,检测结果获国际互认,具有国际公信力。

ISO 质量管理体系认证

ISO 质量管理体系认证

通过ISO 质量管理体系认证,管理体系实现规范化、标准化。

绿色低碳诚信示范创建企业

绿色低碳诚信示范创建企业

荣获绿色低碳诚信示范创建企业称号,践行可持续发展理念,推动绿色低碳转型,助力"双碳"目标实现。

北京市创新型中小企业

北京市"创新型"中小企业

经北京市经济和信息化局认定的创新型中小企业,具备较强创新能力与较高专业化水平,是优质中小企业梯度培育体系的重要基础力量。

北京市专精特新中小企业

北京市"专精特新"中小企业

经北京市经济和信息化局认定的专精特新中小企业,具备专业化、精细化、特色化、新颖化发展特征,在细分领域具有较强竞争优势。

查看全部资质

仪器设备

国际先进检测仪器,确保检测数据精准可靠

查看全部设备

检测流程

标准化流程,高效交付

01

需求沟通

客户提交检测需求,技术顾问一对一沟通,明确检测项目与标准。

➔
02

样品寄送

客户按照规范要求寄送样品,实验室确认样品状态与数量。

➔
03

实验检测

专业工程师按照标准方法进行检测分析,全程质量控制。

➔
04

数据审核

检测数据经多级审核,确保结果准确、可靠、可追溯。

➔
05

报告出具

出具检测报告,支持电子版与纸质版,快递送达。

VR实验室720°全景 NEW · 全新上线 VR实验室上线啦! 720°全景实景观览 · 足不出户走进实验室 立即体验 检测咨询 · 立即在线沟通