外部电源适配器检测

ITU-T L.1001-2012 (预发布)固定信息和通信技术设备的外部通用电源适配器解决方案

This Recommendation defines the requirements for a universal power adapter solution (UPA) designed for ICT devices for stationary (non-portable) use

(Pre-Published) External universal power adapter solutions for stationary information and communication technology devices

DB15/T 1083-2016 电源适配器检验规范

MNOSZ 290-1951 变速箱电源适配器环

QB/T 4491-2013 电鸣乐器电源适配器通用技术条件

本标准规定了电鸣乐器电源适配器的术语和定义、分类、要求、试验方法、检验规则及标志、包装、运输、贮存。本标准适用于电鸣乐器用电源适配器(以下简称“适配器

General specification for external power supplies of electrophones musical instruments

BS 1363-3:2016 13 A插头、电源插座、适配器和连接装置.第3部分:适配器规格

13 A plugs, socket-outlets, adaptors and connection units. Part 3: Specification for adaptors

QC/T 1155-2021 汽车用USB功率电源适配器

BS 1363-3:1995+A4:2012 13 A插头、电源插座、适配器和连接装置.适配器规格

This part of BS 1363 specifies requirements for adaptors having insulating sleeves on the line and neutral plug pins and suitable for use

13 A plugs, socket-outlets, adaptors and connection units. Part 3:Specification for adaptors

BS 1363-3:1995 13 A 插头、电源插座、适配器和连接装置.适配器用规范

Specifies requirements for adaptors having insulating sleeves on the line and neutral plug pins and suitable for use with socket-outlets complying

13 A plugs, socket-outlets, adaptors and connection units. Specification for adaptors

T/CA 106-2019 车载直流电源适配器技术规范

本标准规定了车载直流电源适配器的技术要求、检测方法。主要包括车载直流电源适配器的机械特性、电气特性、安全特性、环境适应性等。 本标准适用于由汽车点烟器接口或类似电源接口供电，电压为12V和/或24V直流输出，能够为音视频、信息技术、通信技术、车内用电器等设备提供电源的车载直流电源适配器。适配器的

In-vehicle DC power supply adapter specification

T/GDC 1-2018 笔记本电脑电源适配器通用技术要求

外观结构、尺寸要求、产品电气特性、线电骚扰特性、安全性能

SAE AS5013-1997 液压外部铸模直线扩口适配器配件

FITTING, ADAPTER, STRAIGHT FLARELESS, EXTERNAL SWAGE, HYDRAULICTABLE 1A - DIMENSIONS A-GTABLE 1B - DIMENSIONS H-AATABLE 2- WEIGHTS

FITTING@ ADAPTER@ STRAIGHT FLARELESS@ EXTERNAL SWAGE@ HYDRAULIC

SJ/T 11530-2015 信息技术 开关型电源适配器通用规范

本标准规定了开关型电源适配器(简称电源适配器)的术语和定义、要求、测验方法、质量评定程序、标志、包装、运输、贮存等。本标准适用于信息技术设备用交流-直流输出的开关型电源适配器,如:计算机及外围设备、电子书、数字照(摄)相机等设备用开关型电源适配器,其他电源适配器也可参照本标准

Information technology.General specification for switching power adapter

SAE AS4215-1997 液压3,000 psi外部锻造管端外螺纹梁密封适配器配件

Fitting, Adapter, Beam Seal, External Thread, External Swage Tube End, Hydraulic, 3000 psi

Fitting@ Adapter@ Beam Seal@ External Thread@ External Swage Tube End@ Hydraulic@ 3000 psi

SAE AS5267-1997 液压外部铸模扩口直线型适配器配件

Fitting, Adapter, Straight, Flareless, External Swage, HydraulicFIGURE 1 - CONFIGURATION FOR SIZE 16 ONLYFIGURE 2 - CONFIGURATION FOR SIZE 20

FITTING@ ADAPTER@ STRAIGHT@ FLARELESS@ EXTERNAL SWAGE@ HYDRAULIC

DLA MS3136 NOTICE 3-2000 电适配器连接器

This notice should be filed in front of MS3136, dated 8 September 1987

CONNECTOR, ADAPTER, ELECTRIC

ITU-T L.1001-2012 (预发布)固定信息和通信技术设备的外部通用电源适配器解决方案

This Recommendation defines the requirements for a universal power adapter solution (UPA) designed for ICT devices for stationary (non-portable) use

(Pre-Published) External universal power adapter solutions for stationary information and communication technology devices

DB15/T 1083-2016 电源适配器检验规范

MNOSZ 290-1951 变速箱电源适配器环

QB/T 4491-2013 电鸣乐器电源适配器通用技术条件

本标准规定了电鸣乐器电源适配器的术语和定义、分类、要求、试验方法、检验规则及标志、包装、运输、贮存。本标准适用于电鸣乐器用电源适配器(以下简称“适配器

General specification for external power supplies of electrophones musical instruments

BS 1363-3:2016 13 A插头、电源插座、适配器和连接装置.第3部分:适配器规格

13 A plugs, socket-outlets, adaptors and connection units. Part 3: Specification for adaptors

QC/T 1155-2021 汽车用USB功率电源适配器

BS 1363-3:1995+A4:2012 13 A插头、电源插座、适配器和连接装置.适配器规格

This part of BS 1363 specifies requirements for adaptors having insulating sleeves on the line and neutral plug pins and suitable for use

13 A plugs, socket-outlets, adaptors and connection units. Part 3:Specification for adaptors

BS 1363-3:1995 13 A 插头、电源插座、适配器和连接装置.适配器用规范

Specifies requirements for adaptors having insulating sleeves on the line and neutral plug pins and suitable for use with socket-outlets complying

13 A plugs, socket-outlets, adaptors and connection units. Specification for adaptors

T/CA 106-2019 车载直流电源适配器技术规范

本标准规定了车载直流电源适配器的技术要求、检测方法。主要包括车载直流电源适配器的机械特性、电气特性、安全特性、环境适应性等。 本标准适用于由汽车点烟器接口或类似电源接口供电，电压为12V和/或24V直流输出，能够为音视频、信息技术、通信技术、车内用电器等设备提供电源的车载直流电源适配器。适配器的

In-vehicle DC power supply adapter specification

T/GDC 1-2018 笔记本电脑电源适配器通用技术要求

外观结构、尺寸要求、产品电气特性、线电骚扰特性、安全性能

SAE AS5013-1997 液压外部铸模直线扩口适配器配件

FITTING, ADAPTER, STRAIGHT FLARELESS, EXTERNAL SWAGE, HYDRAULICTABLE 1A - DIMENSIONS A-GTABLE 1B - DIMENSIONS H-AATABLE 2- WEIGHTS

FITTING@ ADAPTER@ STRAIGHT FLARELESS@ EXTERNAL SWAGE@ HYDRAULIC

SJ/T 11530-2015 信息技术 开关型电源适配器通用规范

本标准规定了开关型电源适配器(简称电源适配器)的术语和定义、要求、测验方法、质量评定程序、标志、包装、运输、贮存等。本标准适用于信息技术设备用交流-直流输出的开关型电源适配器,如:计算机及外围设备、电子书、数字照(摄)相机等设备用开关型电源适配器,其他电源适配器也可参照本标准

Information technology.General specification for switching power adapter

SAE AS4215-1997 液压3,000 psi外部锻造管端外螺纹梁密封适配器配件

Fitting, Adapter, Beam Seal, External Thread, External Swage Tube End, Hydraulic, 3000 psi

Fitting@ Adapter@ Beam Seal@ External Thread@ External Swage Tube End@ Hydraulic@ 3000 psi

SAE AS5267-1997 液压外部铸模扩口直线型适配器配件

Fitting, Adapter, Straight, Flareless, External Swage, HydraulicFIGURE 1 - CONFIGURATION FOR SIZE 16 ONLYFIGURE 2 - CONFIGURATION FOR SIZE 20

FITTING@ ADAPTER@ STRAIGHT@ FLARELESS@ EXTERNAL SWAGE@ HYDRAULIC

DLA MS3136 NOTICE 3-2000 电适配器连接器

This notice should be filed in front of MS3136, dated 8 September 1987

CONNECTOR, ADAPTER, ELECTRIC