服务热线:400-635-0567

海上石油平台用防腐涂料检测

发布时间:2024-05-27 17:49:26 - 更新时间:2024年06月29日 15:22

点击量:0

军工检测 其他检测

HG/T 5059-2016

HG/T 5057~5060-2016 水性环氧地坪、轨道交通车辆水性阻尼和液化天然气(LNG)储罐 (2016)

SY/T 10008-2000 固定式钢质生产蚀控制

1.1 本标准为确定海上固定式钢质石油生产平台及有关的油气处理设备外部的腐蚀控制所需的最低要求提供了指南。本标准中对平台的腐蚀控制分为三个区域:全浸区、飞溅区和大气区。各区分别论述。 1.2 由于环境条件的复杂性,本标准没有提供针对每个特殊情况的指南。在许多情况下,同一问题可能会有几种

Corrosion control of steel fixed offshore platforms associated with petroleum production

TCVN 6170-8-1999 固定式.构筑物.第8部分:

Fixed offshore platforms-Structures-Part 8: Corrosion protection

YB/T 4274-2012 热轧H型钢

本标准规定了海洋石油平台用热轧H型钢的牌号、订货内容、尺寸、外形、重量及允许偏差、技术要求、试验方法、检验规则、包装、标志和质量证明书等。本标准适用于制造海洋石油平台结构用的一般强度和高强度热轧H型钢(以下简称H型钢),其翼缘厚度不大于50mm。海洋石油平台用热轧H型钢的生产厂应由中国船级社或其他

Hot rolling H section steel for offshore oil drilling platform

CB/T 4397-2014 电气设备护、爆等级要求

本标准规定了海洋石油平台电气设备防护、防爆等级选取,包括危险区域的划分,爆炸性气体的分类,防护、防爆等级的规定,不同区域电气设备的防护等级的选择,不同区域电气设备的防爆等级的选择。本标准适用于海洋石油平台设计中电气设备防护、防爆等级的选取

Requirement for protection and explosion-proof grade of electrical equipment for offshore oil platform

GB/T 29549.2-2013 固定模块钻机 第2部分:建造

GB/T 29549的本部分规定了用于海上石油固定平台模块钻机(以下简称模块钻机)结构、管线、舾装制造和设备安装与调试的要求。本部分适用于模块钻机的陆地建造

Specifications for offshore modular drilling rigs on fixed platforms.Part 2:Construction

GB/T 29549.3-2013 固定模块钻机 第3部分:安装、调试与验收

GB/T 29549的本部分规定了用于海上石油固定平台模块钻机(以下简称模块钻机)的海上吊装、海上设备安装与系统连接、系统调试和验收的要求。本部分适用于模块钻机的海上安装、调试与验收

Specifications for offshore modular drilling rigs on fixed platforms.Part 3:Hook-up,commissioning and acceptance

GB/T 29549.1-2013 固定模块钻机 第1部分:设计

GB/T 29549的本部分规定了海上石油固定平台模块钻机(以下简称模块钻机)的功能要求与基本参数、模块划分与布置、模块设计和界面等要求。本部分适用于模块钻机设计

Specifications for offshore modular drilling rigs on fixed platforms.Part 1:Design

BS ISO 19903:2007 和天然气工业.固定混凝土

ISO 19903:2006 specifies requirements and provides recommendations applicable to fixed concrete offshore structures for the petroleum and natural gas

Petroleum and natural gas industries - Fixed concrete offshore structures

DIN EN ISO 19903:2007 和天然气工业.固定混凝土

This International Standard specifies requirements and provides recommendations applicable to fixed concrete offshore structures for the petroleum

Petroleum and natural gas industries - Fixed concrete offshore structures (ISO 19903:2006); English version EN ISO 19903:2006

EN ISO 18647:2019 和天然气工业.固定模块化钻机

ISO 18647:2017 gives requirements for the design, fabrication, installation, commissioning and integrity management of modular drilling rigs

Petroleum and natural gas industries - Modular drilling rigs for offshore fixed platforms (ISO 18647:2017)

PN BN 6113-07-1963 水

Przedmiotem normy B? farby przeciwkorozyjne do gruntowania podwodnych cz??ci statków stalowych

GB/T 14090.2-1993 气开发工程术语

本标准规定了海上油气开发工程用平台(包括固定式和移动式平台)的性能、结构和设备部分的有关术语及其定义。 本标准适用于科研、设计、生产和教学等领域

Terminology for offshore oil and gas development engineering.Platform

CB/T 3757-2014 斜梯

本标准规定了海上平台斜梯(以下简称斜梯)的分类和标记、要求、试验方法、检验规则、标志和包装、运输和贮存。本标准适用于海上平台非液舱及非货舱处所斜梯的设计、制造和验收

Inclined ladder for offshore platform

HG/T 5059-2016

HG/T 5057~5060-2016 水性环氧地坪、轨道交通车辆水性阻尼和液化天然气(LNG)储罐 (2016)

SY/T 10008-2000 固定式钢质生产蚀控制

1.1 本标准为确定海上固定式钢质石油生产平台及有关的油气处理设备外部的腐蚀控制所需的最低要求提供了指南。本标准中对平台的腐蚀控制分为三个区域:全浸区、飞溅区和大气区。各区分别论述。 1.2 由于环境条件的复杂性,本标准没有提供针对每个特殊情况的指南。在许多情况下,同一问题可能会有几种

Corrosion control of steel fixed offshore platforms associated with petroleum production

TCVN 6170-8-1999 固定式.构筑物.第8部分:

Fixed offshore platforms-Structures-Part 8: Corrosion protection

YB/T 4274-2012 热轧H型钢

本标准规定了海洋石油平台用热轧H型钢的牌号、订货内容、尺寸、外形、重量及允许偏差、技术要求、试验方法、检验规则、包装、标志和质量证明书等。本标准适用于制造海洋石油平台结构用的一般强度和高强度热轧H型钢(以下简称H型钢),其翼缘厚度不大于50mm。海洋石油平台用热轧H型钢的生产厂应由中国船级社或其他

Hot rolling H section steel for offshore oil drilling platform

CB/T 4397-2014 电气设备护、爆等级要求

本标准规定了海洋石油平台电气设备防护、防爆等级选取,包括危险区域的划分,爆炸性气体的分类,防护、防爆等级的规定,不同区域电气设备的防护等级的选择,不同区域电气设备的防爆等级的选择。本标准适用于海洋石油平台设计中电气设备防护、防爆等级的选取

Requirement for protection and explosion-proof grade of electrical equipment for offshore oil platform

GB/T 29549.2-2013 固定模块钻机 第2部分:建造

GB/T 29549的本部分规定了用于海上石油固定平台模块钻机(以下简称模块钻机)结构、管线、舾装制造和设备安装与调试的要求。本部分适用于模块钻机的陆地建造

Specifications for offshore modular drilling rigs on fixed platforms.Part 2:Construction

GB/T 29549.3-2013 固定模块钻机 第3部分:安装、调试与验收

GB/T 29549的本部分规定了用于海上石油固定平台模块钻机(以下简称模块钻机)的海上吊装、海上设备安装与系统连接、系统调试和验收的要求。本部分适用于模块钻机的海上安装、调试与验收

Specifications for offshore modular drilling rigs on fixed platforms.Part 3:Hook-up,commissioning and acceptance

GB/T 29549.1-2013 固定模块钻机 第1部分:设计

GB/T 29549的本部分规定了海上石油固定平台模块钻机(以下简称模块钻机)的功能要求与基本参数、模块划分与布置、模块设计和界面等要求。本部分适用于模块钻机设计

Specifications for offshore modular drilling rigs on fixed platforms.Part 1:Design

BS ISO 19903:2007 和天然气工业.固定混凝土

ISO 19903:2006 specifies requirements and provides recommendations applicable to fixed concrete offshore structures for the petroleum and natural gas

Petroleum and natural gas industries - Fixed concrete offshore structures

DIN EN ISO 19903:2007 和天然气工业.固定混凝土

This International Standard specifies requirements and provides recommendations applicable to fixed concrete offshore structures for the petroleum

Petroleum and natural gas industries - Fixed concrete offshore structures (ISO 19903:2006); English version EN ISO 19903:2006

EN ISO 18647:2019 和天然气工业.固定模块化钻机

ISO 18647:2017 gives requirements for the design, fabrication, installation, commissioning and integrity management of modular drilling rigs

Petroleum and natural gas industries - Modular drilling rigs for offshore fixed platforms (ISO 18647:2017)

PN BN 6113-07-1963 水

Przedmiotem normy B? farby przeciwkorozyjne do gruntowania podwodnych cz??ci statków stalowych

GB/T 14090.2-1993 气开发工程术语

本标准规定了海上油气开发工程用平台(包括固定式和移动式平台)的性能、结构和设备部分的有关术语及其定义。 本标准适用于科研、设计、生产和教学等领域

Terminology for offshore oil and gas development engineering.Platform

CB/T 3757-2014 斜梯

本标准规定了海上平台斜梯(以下简称斜梯)的分类和标记、要求、试验方法、检验规则、标志和包装、运输和贮存。本标准适用于海上平台非液舱及非货舱处所斜梯的设计、制造和验收

Inclined ladder for offshore platform

检测流程
填写并提交定制服务需求表
技术评估和方案讨论
对选定的试验方法进行报价
合同签定与付款
按期交付检测报告和相关数据
想了解更多检测项目
请点击咨询在线工程师
点击咨询
联系我们
服务热线:400-635-0567
地址:北京市丰台区航丰路8号院1号楼1层121
邮编:10000
总机:400-635-0567
联系我们

服务热线:400-635-0567

投诉建议:010-82491398

报告问题解答:010-8646-0567-8

周期、价格等

咨询

技术咨询