服务热线:400-635-0567

建筑用弹性中涂漆检测

发布时间:2024-05-27 17:49:26 - 更新时间:2024年06月29日 15:22

点击量:0

军工检测 其他检测

HG/T 4567-2013

本标准规定了建筑用弹性中涂漆的产品分类、要求、试验方法、检验规则、标志、包装和贮存等内容。本标准适用于由合成树脂乳液以及各种颜料、体质颜料、助剂为主要原料按一定比例配制而成的弹性中涂漆。主要用于墙体涂装中,涂布于底漆与面漆之间,弥盖因基材伸缩而产生的细小裂纹及赋予特定的装饰效果,对建筑物起装饰与保护

Elastomeric middle coatings for architecture

JG/T 172-2005

本标准规定了弹性建筑涂料的分类、技术指标、试验方法、检验规则及标志、包装、运输、储存等要求。 本标准适用于由合成树脂乳液为基料,并由各种颜料、填料和助剂等配制而成的弹性建筑涂料

Elastomeric wall coatings

JG/T 172-2014

本标准规定了弹性建筑涂料的术语和定义、分类、要求、试验方法、检验规则、标志、包装、运输、贮存。本标准适用于以合成树脂乳液为基料,与颜料、填料和助剂等配制而成的弹性建筑涂料

Elastomeric wall coatings

T/SHHJ 000015-2021

弹性建筑涂料的术语和定义、产品分类和分等、要求、试验方法、检验规则及标志、包装和贮存

Elastomeric wall coatings

HG/T 4842-2015 乳液

本标准规定了各类合成树脂弹性乳液的分类,要求,试验方法,检验规则,标志、包装和贮存。 本标准适用于由(甲基)丙烯酸及其酯类、苯乙烯、醋酸乙烯基酯类等单体通过乳液聚合而成的以水作为分散介质、用于建筑弹性涂料中起成膜黏结作用的各类合成树脂弹性乳液。 建筑涂料用其他类型的弹性乳液以及其他水性涂料用弹性

Elastomeric emulsions for archiectural coatings

JC/T 2079-2011 质感层材料

本标准规定了建筑用弹性质感涂层材料的分类和标记、要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于以合成树脂乳液为基料,由颜料、不同粒径彩砂等填料及助剂配制而成,通过刮涂、喷涂或刷涂等施工方法,在建筑物表面形成具有艺术质感效果的弹性抗裂饰面涂层

Elastomeric stucco for building

T/CBMF 190-2022 有机硅

本文件规定了有机硅弹性建筑涂料的分类和标记、要求、试验方法、检验规则、标志、包装、运输和贮存。 本文件适用于内、外墙涂装及屋面外露防水用有机硅弹性建筑涂料

Silicone elastic architectural coating

HG/T 5065-2016 罩光清

AS/NZS 2311-2000 指南

Provides guidelines on products and procedures for the painting of buildings for domestic, commercial and industrial use. Discusses different material

Guide to the painting of buildings

BS EN 12206-1:2021 油和清铝和铝合金层。热固料粉末制备的

Paints and varnishes. Coating of aluminium and aluminium alloys for architectural purposes. Coatings prepared from thermosetting coating powder

CSN 67 3531-1983 的油 O 2301

Zpracovatel a oborové normaliza?ní st?edisko: Barvy a laky, n. p., V?zkumn? ústav nátěrov?ch hmot, Praha, Ing. B. Rothová Pracovník ??adu pro

Oil paint for onstruction O 2301

AS 3730.15-2006 料的特指南.金属锌表面乳液

Provides a guide to the features and typical properties that are expected of a water-borne latex primer paint for interior and exterior use on zinc

Guide to the properties of paints for buildings - Primer - Latex - For metallic zinc surfaces

AS/NZS 2728-2007 室内和室外饰/预金属板.能要求

Specifies performance requirements for prepainted and organic film/metal laminate products in sheet and strip form that are coated on one or both

Prefinished/prepainted sheet metal products for interior/exterior building applications - Performance requirements

PN B10285-1969 在时.器和瓷釉装粘结料而不是水

Przedmiotem normy s? wymagania w zakresie wykonywania i badania przy odbiorze robót malarskich budowlanych farbami, lakierami i emaliami na

Pointing of buildings with points, lacquers and enamels on binders others than water

ASTM D5069/D5069M-13(2019 料评定辊盖的制备

Standard Practice for Preparation of Paint-Roller Covers for Evaluation of Architectural Coatings

HG/T 4567-2013

本标准规定了建筑用弹性中涂漆的产品分类、要求、试验方法、检验规则、标志、包装和贮存等内容。本标准适用于由合成树脂乳液以及各种颜料、体质颜料、助剂为主要原料按一定比例配制而成的弹性中涂漆。主要用于墙体涂装中,涂布于底漆与面漆之间,弥盖因基材伸缩而产生的细小裂纹及赋予特定的装饰效果,对建筑物起装饰与保护

Elastomeric middle coatings for architecture

JG/T 172-2005

本标准规定了弹性建筑涂料的分类、技术指标、试验方法、检验规则及标志、包装、运输、储存等要求。 本标准适用于由合成树脂乳液为基料,并由各种颜料、填料和助剂等配制而成的弹性建筑涂料

Elastomeric wall coatings

JG/T 172-2014

本标准规定了弹性建筑涂料的术语和定义、分类、要求、试验方法、检验规则、标志、包装、运输、贮存。本标准适用于以合成树脂乳液为基料,与颜料、填料和助剂等配制而成的弹性建筑涂料

Elastomeric wall coatings

T/SHHJ 000015-2021

弹性建筑涂料的术语和定义、产品分类和分等、要求、试验方法、检验规则及标志、包装和贮存

Elastomeric wall coatings

HG/T 4842-2015 乳液

本标准规定了各类合成树脂弹性乳液的分类,要求,试验方法,检验规则,标志、包装和贮存。 本标准适用于由(甲基)丙烯酸及其酯类、苯乙烯、醋酸乙烯基酯类等单体通过乳液聚合而成的以水作为分散介质、用于建筑弹性涂料中起成膜黏结作用的各类合成树脂弹性乳液。 建筑涂料用其他类型的弹性乳液以及其他水性涂料用弹性

Elastomeric emulsions for archiectural coatings

JC/T 2079-2011 质感层材料

本标准规定了建筑用弹性质感涂层材料的分类和标记、要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于以合成树脂乳液为基料,由颜料、不同粒径彩砂等填料及助剂配制而成,通过刮涂、喷涂或刷涂等施工方法,在建筑物表面形成具有艺术质感效果的弹性抗裂饰面涂层

Elastomeric stucco for building

T/CBMF 190-2022 有机硅

本文件规定了有机硅弹性建筑涂料的分类和标记、要求、试验方法、检验规则、标志、包装、运输和贮存。 本文件适用于内、外墙涂装及屋面外露防水用有机硅弹性建筑涂料

Silicone elastic architectural coating

HG/T 5065-2016 罩光清

AS/NZS 2311-2000 指南

Provides guidelines on products and procedures for the painting of buildings for domestic, commercial and industrial use. Discusses different material

Guide to the painting of buildings

BS EN 12206-1:2021 油和清铝和铝合金层。热固料粉末制备的

Paints and varnishes. Coating of aluminium and aluminium alloys for architectural purposes. Coatings prepared from thermosetting coating powder

CSN 67 3531-1983 的油 O 2301

Zpracovatel a oborové normaliza?ní st?edisko: Barvy a laky, n. p., V?zkumn? ústav nátěrov?ch hmot, Praha, Ing. B. Rothová Pracovník ??adu pro

Oil paint for onstruction O 2301

AS 3730.15-2006 料的特指南.金属锌表面乳液

Provides a guide to the features and typical properties that are expected of a water-borne latex primer paint for interior and exterior use on zinc

Guide to the properties of paints for buildings - Primer - Latex - For metallic zinc surfaces

AS/NZS 2728-2007 室内和室外饰/预金属板.能要求

Specifies performance requirements for prepainted and organic film/metal laminate products in sheet and strip form that are coated on one or both

Prefinished/prepainted sheet metal products for interior/exterior building applications - Performance requirements

PN B10285-1969 在时.器和瓷釉装粘结料而不是水

Przedmiotem normy s? wymagania w zakresie wykonywania i badania przy odbiorze robót malarskich budowlanych farbami, lakierami i emaliami na

Pointing of buildings with points, lacquers and enamels on binders others than water

ASTM D5069/D5069M-13(2019 料评定辊盖的制备

Standard Practice for Preparation of Paint-Roller Covers for Evaluation of Architectural Coatings

检测流程
填写并提交定制服务需求表
技术评估和方案讨论
对选定的试验方法进行报价
合同签定与付款
按期交付检测报告和相关数据
想了解更多检测项目
请点击咨询在线工程师
点击咨询
联系我们
服务热线:400-635-0567
地址:北京市丰台区航丰路8号院1号楼1层121
邮编:10000
总机:400-635-0567
联系我们

服务热线:400-635-0567

投诉建议:010-82491398

报告问题解答:010-8646-0567-8

周期、价格等

咨询

技术咨询