索具套环检测

CB/T 33-1999 索具套环

Rope thimbles

GB 560-1987 索具套环

Rope thimbles

CB/T 3479-1992 游艇.不锈钢丝绳用的索具螺旋扣.叉头、连接销和套环的基本尺寸

本标准规定了与不锈钢丝绳配用的索具螺旋扣的叉头、连接销和套环的主要配合尺寸，以保证索具及其附件的安装、配套和互换性。 本标准主要适用于游艇

DLA MIL-T-23326 A NOTICE 1-1997 综合钢索套环

The General Services Administration has authorized the use of this commercial item description as a replacement for Military Specifications

THIMBLE, SYNTHETIC ROPE

DLA MIL-T-23326 A-1984 综合钢索套环

This specification is approved EtIr use by the Naval Sea Systems Command, Department of the Navy, and is available for use by all. Departments

THIMBLE, SYNTHETIC ROPE

ARMY MIL-T-1547 E VALID NOTICE 1-1989 绳索套环(实心)

MIL-T-1547E dated 28 December 1983 has been reviewed and determined to be valid for use in acquisition

THIMBLES, ROPE (SOLID)

ARMY MIL-T-1547 E-1983 绳索套环(实心)

This document covers one type of cast malleable iron rope himble

THIMBLES, ROPE (SOLID)

DIN 21386:1988 绳索装置.圆钢丝索的套环

Thimbles for round ropes, when they are part of rope attachments, are used for fastening round ropes. By this they are the connection to the other

Rope attachments; thimbles for round ropes

DIN 6899:1988 纤维绳索的钢套环

This standard specifies dimensions, materials, finish, marking and designation for thimbles used especially with fibre ropes. The standardized sizes

Steel thimbles for fibre ropes

GB/T 25855-2010 索具用8级连接环

本标准规定了极限工作载荷不大于132t的8级锻造或焊接钢制主环、中间主环、主环组件和下端环的技术要求。该连接环与下列索具一起用于起吊重物、材料或货物。 GB/T 20652和GB/T 25853规定的吊链； GB/T 16762规定的钢丝绳吊索； EN 1492-1和EN 1492-2规定的

Links of grade 8 for use with slings

DIN 21381:1988 绳索装置.圆钢丝索的套环连接板

Rope attachments; thimble connection plates for round ropes

GB/T 30589-2014 钢丝绳绳端 套管压制索具

本标准规定了套管压制的钢丝绳索具的术语和定义、设计加工文件、原材料、套管压制、型式检验、产品出厂检验、标志和质量证明书等。本标准适用于公称直径不大于150 mm,钢丝绳强度级别不大于1 960 MPa的套管压制索具

Steel wire rope terminations.Ferrule-securing sling

YB/T 4471-2015 对缠式钢套管压接索具

本标准规定了对缠式钢套管压制索具的术语和定义、分类和标记、要求、试验方法、检验规则、标识和质量证明书、包装、运输和贮存等。 本标准适用于公称直径为6mm～150mm，公称抗拉强度不大于1960MPa的单层圆股钢丝绳

Sling with flemish eye ferrule-secured termination

YB/T 4474-2015 折返式钢套管压接索具

本标准规定了折返式钢套管压接索具(以下简称为索具)的分类、技术要求、试验方法、检验规则及标识、包装、运输、贮存等。 本标准适用于公称直径为4mm～94mm，公称抗拉强度等级不大于1960MPa的单层圆股钢丝绳压制的索具

Sling with turn-back eye steel ferrule-secured temination

SP 66 and SP 67-1955 航空用钢索端头套环规范

Specifications for cable thimbles for aircraft

CB/T 33-1999 索具套环

Rope thimbles

GB 560-1987 索具套环

Rope thimbles

CB/T 3479-1992 游艇.不锈钢丝绳用的索具螺旋扣.叉头、连接销和套环的基本尺寸

本标准规定了与不锈钢丝绳配用的索具螺旋扣的叉头、连接销和套环的主要配合尺寸，以保证索具及其附件的安装、配套和互换性。 本标准主要适用于游艇

DLA MIL-T-23326 A NOTICE 1-1997 综合钢索套环

The General Services Administration has authorized the use of this commercial item description as a replacement for Military Specifications

THIMBLE, SYNTHETIC ROPE

DLA MIL-T-23326 A-1984 综合钢索套环

This specification is approved EtIr use by the Naval Sea Systems Command, Department of the Navy, and is available for use by all. Departments

THIMBLE, SYNTHETIC ROPE

ARMY MIL-T-1547 E VALID NOTICE 1-1989 绳索套环(实心)

MIL-T-1547E dated 28 December 1983 has been reviewed and determined to be valid for use in acquisition

THIMBLES, ROPE (SOLID)

ARMY MIL-T-1547 E-1983 绳索套环(实心)

This document covers one type of cast malleable iron rope himble

THIMBLES, ROPE (SOLID)

DIN 21386:1988 绳索装置.圆钢丝索的套环

Thimbles for round ropes, when they are part of rope attachments, are used for fastening round ropes. By this they are the connection to the other

Rope attachments; thimbles for round ropes

DIN 6899:1988 纤维绳索的钢套环

This standard specifies dimensions, materials, finish, marking and designation for thimbles used especially with fibre ropes. The standardized sizes

Steel thimbles for fibre ropes

GB/T 25855-2010 索具用8级连接环

本标准规定了极限工作载荷不大于132t的8级锻造或焊接钢制主环、中间主环、主环组件和下端环的技术要求。该连接环与下列索具一起用于起吊重物、材料或货物。 GB/T 20652和GB/T 25853规定的吊链； GB/T 16762规定的钢丝绳吊索； EN 1492-1和EN 1492-2规定的

Links of grade 8 for use with slings

DIN 21381:1988 绳索装置.圆钢丝索的套环连接板

Rope attachments; thimble connection plates for round ropes

GB/T 30589-2014 钢丝绳绳端 套管压制索具

本标准规定了套管压制的钢丝绳索具的术语和定义、设计加工文件、原材料、套管压制、型式检验、产品出厂检验、标志和质量证明书等。本标准适用于公称直径不大于150 mm,钢丝绳强度级别不大于1 960 MPa的套管压制索具

Steel wire rope terminations.Ferrule-securing sling

YB/T 4471-2015 对缠式钢套管压接索具

本标准规定了对缠式钢套管压制索具的术语和定义、分类和标记、要求、试验方法、检验规则、标识和质量证明书、包装、运输和贮存等。 本标准适用于公称直径为6mm～150mm，公称抗拉强度不大于1960MPa的单层圆股钢丝绳

Sling with flemish eye ferrule-secured termination

YB/T 4474-2015 折返式钢套管压接索具

本标准规定了折返式钢套管压接索具(以下简称为索具)的分类、技术要求、试验方法、检验规则及标识、包装、运输、贮存等。 本标准适用于公称直径为4mm～94mm，公称抗拉强度等级不大于1960MPa的单层圆股钢丝绳压制的索具

Sling with turn-back eye steel ferrule-secured temination

SP 66 and SP 67-1955 航空用钢索端头套环规范

Specifications for cable thimbles for aircraft